• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.40-47
• /
• 2020

Although gangform has good workability due to the integration of outer wall forms and working platforms, 22 workers were died from 21 gangform related accidents during 2012 to 2016. Quantitative risk assessment is required for evident based prevention measure selection. In this study, based on 52 accident data from 2004 to the first half of 2019, FTA is conducted for probabilities of direct causes and their contribution to accidents. Three stages are considered; gangform installation, dismantling and lifting, and using. The effectiveness of countermeasures is evaluated through minimum cut set, RAW and RRW. Complete assembly of gangform on the ground level, detailed planning, and fall prevention device are suggested as prevention measures for installation, dismantling and lifting, and using stages, respectively.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.11a
• /
• pp.176-180
• /
• 2009

현재 우리나라 SI(Service Integration)에서 사업발주자 및 수행자는 소프트웨어사업 대가산정에 많은 어려움을 겪고 있다. 사업발주자는 관례적인 사업비 산정으로 일관하고, 사업수행자는 근거없이 받아들이는 것이 현실이다. 또한 감리 수행 시 사업비산정근거를 점검할 체계를 갖추지 못하고 있다. 이로 인해, 비용관리 위험 및 파생위험들을 초래할 수 있다. 이에, 사업비 산정과 위험에 대한 구체적인 인식과 연구가 필요하다.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.13-21
• /
• 2008

Final regulatory steps for commercialization of transgenic crops are risk assessment and variety registration. The risk assessment of transgenic crops requires broad network of scientists, high cost and long term. Developers of transgenic crops, therefore, face to additional challenges to consider theoretical and strategic aspects on risk assessment. The general concept for risk assessment of genetically modified organisms was derived from chemical risk assessment. Due to the complexity of organisms, however, comparative approaches that are substantial equivalence and familarity have been developed. In practical view, the integration of risk assessment is more difficult than the evaluation of each risk factors involving gene flow, toxicity and allergenicity. Variety registration of transgenic crops requires the results of risk assessment compared with non-GM crops and agronomic data analyzed with standard varieties. For economic and fast commercialization, risk assessment process should combined with condition of cultivation test for variety registration.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5171-5174
• /
• 2013

Background: This study aimed to explore potential associations between single nucleotide polymorphisms (SNPs) of the x-ray repair cross-complementing group 1 (XRCC1) and cleft lip and palate transmembrane protein 1-like (CLPTM1L) and non-small cell lung cancer (NSCLC) susceptibility in non-smoker Chinese patients. Methods: A total of 200 NSCLC patients and 200 healthy controls with matched age and gender were recruited for genotyping of XRCC1 SNPs (rs2256507 and rs1001581) and CLPTM1L SNPs (rs401681 and rs4975616). Association of these SNPs with NSCLC risk was evaluated by computing the odds ratio (OR) and 95% confidence interval (CI) from multivariate unconditional logistic regression analyses with adjustment for gender and age. Results: The frequencies of genotype and allele in these four loci (rs2256507, rs1001581, rs401681, and rs4975616) were not significantly different between the cases and controls, or between either of the histological subgroups (adenocarcinoma and squamous cell carcinoma) and controls. Conclusions: Although these SNPs are associated with NSCLC risk in patients with a tobacco-smoking habit, this study demonstrated that XRCC1 and CLPTM1L gene SPNs are not linked with NSCLC risk in non-smoking patients, indicating that molecular mechanisms of NSCLC betwee tobacco smokers and non-smokers may be different. Future studies are needed to uncover the underlying molecular mechanisms for NSCLC in non-smokers.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.159-166
• /
• 2016

Recent public information project, which has been organized mainly to large companies is a situation that is being reorganized to small and medium-sized systems integration company. However, many of the small and medium-sized companies lack knowledge of the systematic risk management. Thus, in connection with the revenue, it involves a number of problems. Therefore, in this paper, we present a risk element that occurs mainly in the field of the project, providing a model for measuring the risk element by risk level costs associated with this. Through the convergence, we aim at providing a management system that is able to make the project successfully accomplished, predicting the risk that occurs in advance to pursue the project; Based on the proposed model, it is possible to secure a proper size of reserve fund so it is expected to enable companies to ensure the cost of risk analysis.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.1
• /
• pp.21-29
• /
• 2014

The dynamic information of radar and automatic identification system (AIS) for targets obtained from the traffic vessels operating in the north outer harbor and surrounding waters of Busan port, Korea. The target information was analyzed to investigate the potential collision risk resulting from the invalid true heading (HDT) information of AIS and the integration ambiguity in the graphic presentation of both tracked data sets for two systems. An integrated display system (IDS) for supporting the navigator of offshore fishing vessels was also developed to find possible maneuvering solutions for collision avoidance by comparing radar data with AIS data in real-time at sea. Consequently, the multiple functions of IDS can provide additional information that is potentially valuable for taking action to avoid the collision in offshore fishing vessels. However, the integration criteria of radar and AIS targets in the IDS must be carefully established to eliminate the fusion ambiguity in the graphic presentation of both AIS and radar symbols such as the one or two physical targets which are very close to each other.

• Journal of Information Technology Services
• /
• v.16 no.2
• /
• pp.85-96
• /
• 2017

The revised "Software Industry Promotion Law" has been effective from 2013. This law is to be basis of the domestic public information sector and increases the opportunities for small and medium-sized firms in participating the public IT projects. The shortcomings of this law may be the increase of the risk and the decrease of quality of projects. These suggest that the competencies of project manager (PM) s are critical. Also, in general, an SI (System Integration) project is a one that provides a customer with a customer-tailored system for system integration. Particularly, in an SI project involved in a public institution or a large corporation, the ripple effect of success or failure of a project is becoming greater as the system requires higher cost and more time due to high complexity and large scale. One of the solutions to address these problems is to investigate the competencies of a PM. Thus, in this paper, we derived the major competencies using the RGT (Repertory Grid Technique) and categorized the resultant constructs using the content analysis. In addition, we analyzed the level of importance of competencies by applying the AHP (Analytic Hierarchy Process). The conclusion was that Problem-solving Skill and Leadership were the most important competencies of a project manager.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.124-131
• /
• 2021

In the recent business environment, risks related to product safety problems are increasing. These are arising from various factors such as increasing product and production complexity, supply chain diversification, enhanced PL (product liability) law and strengthening regulations of the government. Accordingly, ISO (international organization for standardization) published standards of PSMS (product safety management system) for suppliers such as ISO 10377 and ISO 10393. Meanwhile, the ISO 9001 QMS (quality management system) was revised in 2015, and it has established itself as an effective tool that can consistently meet the various requirements of stakeholders and promote customer satisfaction. This study aims to suggest an integration framework of QMS and PSMS based on the recent ISO international standards. To this end, firstly, the relationship between QMS and PSMS is studied based on the quality and product safety definitions, PDCA (plan-do-check-act) cycle and risk-based thinking. Secondly, the requirements of ISO 10377 and ISO 9001 are compared and classified as the common and ISO 10377 specific requirements. Finally, integration steps of two systems are suggested and guidelines that can systemize the integrated requirements are presented in the aspect of processes and documentation. This study is expected to be used as a guideline that helps companies those have already acquired QMS certification to build an international-level product safety management system early.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.570-578
• /
• 2019

In this era of big data, a variety of government organizations are trying to create new added value via Information Integration. Therefore, several projects related to government agencies' information sharing have activated system connection/integration. The risk factors of system operation, however, have increased as the volume of Information Integration System grows. The interference in information sharing is predicted to affect the operation of the agencies, and the issue will grow even worse with massive impact on civil society when the agency operation is interrupted due to system failures in terms of infrastructure, software, data quality, and security. Diverse studies related to the maintenance of Information System have been conducted, but there is currently no evaluation framework for the operational system of Information Integration between various government agencies. In this respect, this study distinguishes each of the Information System components, Data, IT, People, Process, systematizes with Plan-Do-See, and finally presents a maturity model for Information Integration. Nine derived processes were analyzed through interview and questionnaires from Information Integration System officials, further suggesting maturity stage applying CMMI. This model allows diagnosis of the maturity level of an Information Integration System, and is expected to be utilized as resource for improving organizational processes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.4057-4062
• /
• 2012

Objective: To study the level of awareness and knowledge about cancers and associated risk factors among households in selected states of India. Methods: In the study 3070 households were interviewed from six states viz, West Bengal, Kerala, Madhya Pradesh, Rajasthan and Mizoram. Results: Knowledge of cancers other than those related to tobacco was very low (prostate 8%, colon 11% ) among the communities, with a poor awareness of warning signs and symptoms. The knowledge varied from state to state. It is found that the major source of information related to cancers was television (38%) followed by friends and relatives (36%). Only about 15 % of respondents had knowledge about cancer awareness camps organized in their districts but they did not have knowledge about the organizers of the camp. Findings suggested a strong need for strengthening of DCCP. Conclusion: It is important to create awareness among community through educational programs on cancer prevention, preventable cancer risk factors, benefits of early diagnosis, and availability of screening facilities. Integration of District Cancer Control activities with NRHM could be the most cost-effective strategy to prevent cancers and rural population.