• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.1
• /
• pp.99-110
• /
• 2004

In order to investigate the performance of carbon dioxide PSA over zeolite adsorbent, the present study showed results of isotherm measurement, cyclic operation of 3-bed apparatus, and the corresponding numerical simulation. The experiment data of bed temperature, purity, recovery were matched well with that of numerical simulation. Purity of both gas and adsorbent phase increased rapidly with rinse rate but the degree of increase was retarded for large rinse rate The total amount of adsorbed increased only 10% even if rinse rate was enlarged to 4 times. Optimal rinse rate was 7N㎥/hr in this study. The heating rinse led to augments in recovery and productivity, possibly thanks to ease of description resulting from increased volumetric rinse rate and temperature rise in the column.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.2
• /
• pp.38-46
• /
• 2001

In this work, the heterogeneous ion exchange membrane was used in a electrodialysis apparatus to treat a Ni planting rinse water because the heterogeneous ion exchange membrane was excellent efficiency as compared with low manufacturing cost, was easy to make, and had a good mechanical properties. For a regeneration of membrane and to obtain the optimal condition for a scale-up of apparatus after treating Ni plating rinse water, we would find about the limiting current density and the concentration polarization. When the Ni plating rinse water 150mg/L was treated with the electrodialysis apparatus using the heterogeneous ion exchange membrane, the limiting current density was about $1.49{\;}mA/\textrm{cm}^2$. And the limiting current density increased with the flow rate and concentration of Ni plating rinse water. We recognized that the used membrane could be reused by periodic backwashing because efficiency was constant when the membrane was backwashed after treating wastewater.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.3 s.9
• /
• pp.13-17
• /
• 2006

Perm is one the of the most common thing in a beauty salon like hair-cut and hair perm needs processing solutions which is chemical substances. Those chemical substances damage the hair cuticle. Damaged hair cuticles with mistakes of perm will follow with the next performance and it will cause more damage to hair. As damage of hair cuticle become worse, it is harder to recover the hair cuticle like before. Therefore, this study shows that plain rinse is the way to reduce the damage of hair cuticle with perm as much as possible. With experiments, I suggest the right way to do plain rinse to satisfy customers' demand and reduce the damage. During the research, I figured that plain rinse with the knowledge, structure of hair cuticle, principle of perm and plain rinse, is very needed. The hair with plain rinse have more elastic curl and have less scales which came off from hair cuticle than the hair without plain rinse. This experiment concludes that hairdresser has to figure out about the time, temperature and type of water depends on the degree of damaged hair of customers. In order to perm, there is no way to not to use chemical substances to perm. Therefore, hairdresser has to choose suitable processing solutions and right steps, and as this is the age of 'well-being' boom, hairdresser must try to keep the healthy hair. Consequently, in order to meet the demands and conditions of customers, hairdresser needs to find the right method to do plain rinse and use the method in perm.

• Journal of Periodontal and Implant Science
• /
• v.24 no.3
• /
• pp.503-512
• /
• 1994

The purpose of this study was to assess the clinical and microbiological effect of chlorhexidine rinse following scaling and root planing on periodontits. 10 patients with periodontal disease were selected for the study. They had not taken antibiotics for months and no history of dental treatment for 6 months before the study. They were good in general health. Patients received a scaling and root planing under local infiltration anesthesia, chlorhexidine rise group were subjected to twice a day 0.1% chlorhexidine rinse for a period 2 week. After initial clinical(plaque index, gingival index, probing pocket depth), microbiological and BANA tests were determined, each subject received a single session of scaling and root planing but no oral hygiene instructions. Clinical indices were measured, microbial parameters and BANA test were reassessed 1, 2 and 4 weeks after treatment. The results were as follows : 1. Plaque index, gingival index and pocket depth in chlorhexidine rinse group and control group were not significantly reduce during all weeks when compared chlorhexidine rinse group with control groups. Plaque index in chlorhexidine rinse group and control group were siginificantly reduced at 1, 2, 4weeks(P<0.05), gingival index and pocket depth wee ignificantly reduced at 2, 4weeks in both groups(P<0.05). 2. Perecntage of cocci and motile rods was significantly changed at 1, 2, 4weeks in chlorhexidine rinse group(P<0.05), control group was significantly changed at 4weeks in control group(P<0.05), intergroup difference was significantly at 2weeks in cocci and 4weeks in motile rods(P<0.05). 3. Percentage of non-motile rods in all group were not significantly changed when compared with those of baseline. 4. Percentage of spirochetes was significantly reduced at 4 week(P<0.05), control group was not significantly reduced during all weeks. 5. BANA test scores was significantly reduced during all weeks in chlorhexidine rinse group(P<0.05), control group was not significantly reduced during all weeks. The result showed that clinical and microbiological effect following scaling, root palning and chlorhexidine on periodontal disease.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.400-400
• /
• 2009

• Restorative Dentistry and Endodontics
• /
• v.46 no.2
• /
• pp.30.1-30.13
• /
• 2021

Objectives: This study was conducted to compare the microleakage and characteristics of the resin-tooth tissue interface between self-etch and etch-and-rinse adhesive systems after 48 hours and 3 months. Materials and Methods: 40 extracted premolar teeth were randomly divided into 2 groups: 1-step self-etch adhesive system - Optibond^TM All-In-One, and 2-step etch-and-rinse adhesive system - Adper^TM Single Bond 2. Both groups were subjected to 500 thermocycles (5℃-55℃) before scanning electron microscope (SEM) analysis or microleakage trial at 48-hour and 3-month time periods. Results: SEM images showed the hybrid layer thickness, diameter, and length of resin tags of the self-etch adhesive (0.42 ± 0.14 ㎛; 1.49 ± 0.45 ㎛; 16.35 ± 14.26 ㎛) were smaller than those of the etch-and-rinse adhesive (4.39 ± 1.52 ㎛; 3.49 ± 1 ㎛; 52.81 ± 35.81 ㎛). In dentin, the microleakage scores of the 2 adhesives were not different in both time periods (48 hours/3 months). However, the microleakage score of etch-and-rinse adhesive increased significantly after 3 months (0.8 ± 0.63 and 1.9 ± 0.88, p < 0.05). Conclusions: The self-etch adhesive exhibited better long-term sealing ability in dentin when compared to that of the etch-and-rinse adhesive. The greater hybrid layer thickness and dimensions of resin tags did not guarantee reliable, long-lasting sealing in the bonding area.

• Journal of Periodontal and Implant Science
• /
• v.24 no.2
• /
• pp.340-356
• /
• 1994

The purpose of this study was to assess the clinical and microbiological effect of chlorhexidine rinse and supragingival plaque control following scaling and root planing on adult periodontal disease. 14 patients with adult periodontitis were selected for the study . They had not taken antibiotics for 6 months and history of dental treatment for 6 months before the study. Patients received a supragingival scaling and root planing under local anesthesia, plaque control group was subjected to professional plaque control 2 times for a period 2 week, chlorhexidine rinse group were subjected to twice daily 0.2% chlorhexidine rinse for a period 2 week. Clinical examination (plaque index, gingival index, probing pocket depth) and distribution of the bacteria morphology of subgingival plaque were monitored on baseline (0 week), 1 week, 2 week, 4 week and 6 week. The results were as follows : 1. Plaque index in chlorhexidine rinse group , plaque control group and control group was significantly reduced during all weeks (P<0.05). 2. Probing pocket depth was significantly reduced at 2, 4, 6 week (P<0.05) in chlorhexidine rinse group and control group, plaque control group was significantly reduced during all weeks (P<0.05). 3. Gingival index was significantly improved at 2, 4, 6 weeks(P<0.05) in chlorhexidine group and plaque control group, control group was significantly improved at 1, 2, 4 weeks (P<0.05). 4. Percentage of cocci was significantly increased at 1, 2, 4 and 6 weeks in chlorhexidine rinse group and control group, plaque control group was significantly increased at 2, 4 and 6 weeks(P<0.05). 5. Percentage of non-motile rods in all group were not significantly changed when compared with those of baseline (0 week) (P<0.05). 6. Percentage of motile rods was significantly reduced during all weeks (P<0.05) in chlorhexidine rinse group, plaque control group was significantly reduced at 2, 4, 6 weeks and 1, 2 and 4 weeks in control group. 7. Percentage of spirochetes was significantly reduced during all weeks (P<0.05), plaque control group was significantly reduced at 2, 4, 6 weeks and 1, 2, 4 weeks in control group. This results were suggested that clinical and microbiological effect of chlorhexidine rinse and supragingival plaque control following scaling and root planing on periodontal disease

• Korean Journal of Agricultural Science
• /
• v.2 no.2
• /
• pp.423-431
• /
• 1975

The purpose of this investigation was to study whether limewater can be used as dairy detergent-sanitizer for dairy farm euipment compared with idophore in the milking machine. 1. Milkstone deposition was increased slightly by idophore and limewater pre-rinse but seriously increased by milking without pre-rinse for 6 days milking. 2. Milkstone deposition was increased by increasing temperature of pre-rinse sanitizer solutions. 3. Limewater rinse was more effective than idophore rinse and tap water rinse in removing butterfat. 4. Idophore and limewater rinse was more effective than tap water rinse in removing milk solid. 5. Both of idophore and limewater were found to be significantly effective for milk bactericidal. 6. It was conclused that good hygienic raw milk can be producesed from dairy farm by idophore and limewater per-rinse.

• Journal of Adhesion and Interface
• /
• v.25 no.2
• /
• pp.63-68
• /
• 2024

In this study, the contamination of gold(Au) wire according to the types of rinse applied for surface treatment in the wire bonding process is investigated and confirmed. For the surface treatment, rinses containing silicon(Si) or those based on organic materials are mainly employed. To identify their effects, surface treatment is conducted on Au wire using two types of rinse at a 1.0 wt% concentration, referred to as Si-including and Oil-based rinse-coated Au wire. Subsequently, a simulation experiment is performed to verify the reactivity of dust containing Si components that could occur in the semiconductor process. Through optical microscopy (OM) and scanning electron microscopy(SEM) analysis, it is observed that a larger amount of dust is adsorbed on the surface of Si-including rinse-coated Au wire compared with the Oil-based rinse-coated Au wire. This is attributed that the rinse containing Si components is relatively polar, causing polar interactions with dust, which also has polarity. Therefore, it is expected that using a rinse without Si components can reduce contamination caused by dust, thereby decreasing the defect rate in the practical wire bonding process.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.2
• /
• pp.60-69
• /
• 1998

Polysilicon surface mdoification tecnique is developed to reduce the sticking of microstructures fabricated by micromachining. Modified anti-sticking grain holes are simply formed by two-step dry eth without additional photolithography nor deposition of thin films. Both process-induced sticking and in-use sticking are successfully reduced more than two times by adopting grain holed polysilicon substrate. A sticking model for cantilever beam is derived. This model includes bending moment stems from stress gradient along the thickness directionof structural polysilicon. Because the surface tension of rinse liquid and the surface energy of the solids to be stuk tend to decrease in recently developed anti-sticking techniques, the effect of stress gradient will play an important role to analyze the sticking phenomena. Effect of the temperature during post-release rinse and dry is modelled and verified experimentally. Based on developed anti-sticking polysilicon structure and the sticking model, sticking of microstructure, fabricated by simple wet process including sacrificial layer etch and rinse with deionized water without special equimpment for post-release rinse and dry was alleviated more than 3.5 times.