• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.72-81
• /
• 2001

Dendroaspis natriuretic peptide (DNP), recently isolated from the venom of the green Mamba snake Dendroaspis angusticeps, is a 38-amino acid peptide containing a 17-amino acid disulfide ring structure similar to that of the natriuretic peptide family. The natriuretic peptide family was known to induce histamine release from human and rat mast cells, but there are no published data concerning the effects of DNP on histamine release from mast cells. The purpose of this study is to investigate whether DNP induces the histamine release from rat peritoneal mast cells (RMPCs) and to determine the mechanism of DNP-induced histamine release from RPMCs. After treatment of the various doses of DNP in RPMCs, the mast cell degranulation was observed with inverted microscopy and the histamine release was measured by radio-enzymatic assay. Calcium uptake and intracellular cyclic GMP level were measured by radioimmunoassays. DNP induced the mast cell degranulation. DNP released the histamine and increased the calcium uptake and the level of intracellular cyclic GMP of RPMCs, in a dose-dependent manner. The results indicate that DNP is capable of inducing histamine release from RPMCs by increasing of calcium uptake and intracellular cyclic GMP level.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.27-34
• /
• 2016

In the train system, railway vehicles are connected in a line. Therefore, this feature should be considered in composing network topology in a train system. Besides, inter-car communication should be distinguished from in-car communication. As for the inter-car communication, the hybrid topology was proposed to use rather than the conventional ring, star, daisy-chain, and bus topologies. In the hybrid topology, a number of cars are bound to be a group. Then star topology is used for the communication in a group and daisy-chain topology is used for the communication between groups. Hybrid topology takes the virtue of both star and daisy-chain topologies. Hence it maintains communication speed with reducing the number of connecting cables between cars. Therefore, it is important to choose the number of cars in a group to obtain higher performance. In this paper, we focus on the optimization of hybrid topology for railway cars. We first assume that the size of data and the frequency of data production for each car is identical. We also assume that the importance for the maximum number of cables to connect cars is variable as well as the importance of the communication speed. Separated weights are granted to both importance and we derive the optimum number of cars in a group for various number of cars and weights.

• Journal of the Korean Chemical Society
• /
• v.38 no.5
• /
• pp.359-365
• /
• 1994

The crystal stucture of hexapotassium undecahydrogen tetratungsto hexaantimonate(V) tetrahydrate has been determined from single crystal X-ray diffraction data. Crystal data are as follows: $K_6H_{12}[Sb_6W_4O_{36}]{\cdot}4H_2O$, Fw = 2360.62, tetragonal, I$4_1$/a, a = 10.799(1) ${\AA}$, c = 35.244(5) ${\AA}$, V = 4110.1(7) ${\AA}^3$, Z = 4, $D_x$ = 3.82 g$cm^{-3}$, $\mu(MoK\alpha)$ = 160.15 $cm^{-1}$, T = 293 K, final R = 0.0356 for 2400($F_0 > 3\sigma(F_0))$ independent reflections. The $[H_{12}Sb_6W_4O_{36}]^{-6}$ polyanion independently consists of one tungsten, two antimony, and nine oxygen atoms and belongs to the $\bar4(S_4)$ point group. This polyanion is formed by two open octahedra five membered ring of Sb(3)$O_6-W(1)O_6-Sb(2)O_6-W(1)O_6-Sb(3)O_6$ which is connected at right angle. The Sb-W, Sb-O, and W-O bond distances range from 3.2304(9) to 3.2403(5) $\AA$, 1.745(8) to 2.334(6) $\AA$, and 1.914(7) to 2.039(7) $\AA$, respectively.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.11-21
• /
• 1996

This study has observed the development, structure and distribution of oil canals in mitsuba, seri, ashitaba and hamabohu, that are condiment herbs belonging to the Umbelliferae family, using a light microscope. Oil canals were found in the petioles, leaf blades, stems, roots, hypocotyls and cotyledons. Oil classified into distribution due to ring vascular bundles, as in mitsuba and seri, and distribution due to diffuse vascular bundles, as in ashitaba and hamabohu. Oil canal development in the cortex due to petiole thickening was followed by the development of collenchyma and vascular bundles. However, no vascular bundles were formed in some cases. Many oil canals were found in the periphery of the petioles. Oil canals in leaf blades were found on the adaxial and abaxial sides on the veins. Those around the main veins were larger. Steam oil canals were found in the cortex and pith in mitsuba and seri, and in the cortex and fundamental tissues around the xylem, in ashitaba and hamabohu, while those in the roots were found in the pericycle in mitsuba and seri, and in the collenchyma-like tissues and phloem in ashitaba and hamabohu. The transverse sections of oil canals were round or elliptical. The secretory cells in the cortex and pith were smaller than the neighboring parenchyma cells, while they were larger than the neighboring parenchyma cells in the phloem.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• The Korean Journal of Pesticide Science
• /
• v.11 no.1
• /
• pp.8-17
• /
• 2007

Three-dimensional quantitative structure-activity relationships (3D-QSARs) on the fungicidal activity against damping-off (Pythium ultimum) with N-phenylbenzenesulfonamide and N-phenyl-2-thienylsulfonamide analogues (1-34) were studied quantitatively using CoMFA (comparative molecular field analysis) and CoMSIA (comparative molecular similarity indeces analysis) methodologies. On the whole, the statistical qualities of CoMSIA models with field fit alignment (FF1-FF5) were slightly higher than that of atom based fit alignment (AF1-AF5) but, the deviations of statistical quality between two alignments in case of CoMFA models were slightly lower. The statistical results of CoMFA and CoMSIA model showed that the optimized CoMSIA model (FF1: $r_{cv.}^2\;(q^2)=0.674$ & $r_{ncv.}^2=0.964$) for damping-off is better predictability and fitness for fungicidal activities than CoMFA model (AF5: $r_{cv.}^2\;(q^2)=0.616$ & $r_{ncv.}^2=0.930$). The fungicidal activities according to the information of the CoMSIA (FF1) model were dependence upon the electrostatic and hydrophobic field of the N-phenylbenzene sulfonamide analogues. Therefore, from the results of graphical analyses on the contour maps with CoMSIA (FF3) model, it is expected that the characters of R4-substituent on the N-phenyl ring as hydrophobic and hydrogen bond acceptor will be contributed to the fungicidal activity against damping-off.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.195-200
• /
• 2009

To develop a crosslinker for the polyester powder coatings, $N^1,N^1,N^4,N^4$-tetrakis(hydroxyethyl)cyclohexane-1,4-dicarboxamide (Cy-${\beta}-HAA$), incorporated with a cyclohexane ring within the main chain of commercial ${\beta}-hydroxyalkylamide$ (${\beta}-HAA$), was prepared from the amidation of dimethyl trans-1,4-cyclohexanedicarboxylate and diethanolamine in the presence of $NaOCH_3$, The structure of $Cy-{\beta}-HAA$ was confirmed by its NMR, FT-IR and ESI-MS spectra. $Cy-{\beta}-HAA$ was thermally more stable than ${\beta}-HAA$. When $Cy-{\beta}-HAA$ was used as a crosslinker for the polyester powder coatings, it provided the smooth coating surface and reduced the formation of pinholes in the coating surface with comparison with ${\beta}-HAA$.

• Applied Biological Chemistry
• /
• v.39 no.2
• /
• pp.140-146
• /
• 1996

Imidacloprid and a series of the related compounds were synthesized, and influence of 3-N substituents(R) on the insecticidal activities against Brown plant hopper(Nilaparvata lugens) and Green peach aphid(Myzus persicae) were examined quantitatively from the structure-activities relationships(Shh) techniques. The results indicated that the molecular hydrophobicity$({\pi})$ and inductive substituent constant$({\sigma}^{\ast})$ of substituents(R) at 3-nitrogen position on the imidazolidine ring were important factors. Variations in the potency were parabolically related to the both constants. In case of Brown plant hopper, optimum value of ${\pi}$ constant was 0.52, whereas the value of ${\sigma}^{\ast}$ constant against Green peach aphid was 1.17, respectively. Among them, the strong electron withdrawing groups$({\sigma}^{\ast}>0)$ such as methyl and benzenesulfonyl group(7 & 8) showed lower insecticidal activity and non-substituted, 1(imidacloprid) showed the best insecticidal activity. It seems that the intramolecular associated(H-bond) form between 2-N-nitro group and 3-imid group may contribute to the higher insecticidal activity to the both sucking insects. And in aqueous solution, 1 showed higher residual activity below pH 6.0, and the half-life$(T_{1/2})$ was about 6 month at pH 7.0 $(ca.\;k_{obs.}:5{\times}10^{-8}sec.^{-1})$ and $45^{\circ}C$.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.72-78
• /
• 2003

To observe the effect of excitation coil pitch on the micro fluxgate magnetic sensor, two sensors are fabricated using multi layer board process and the pitch distance of excitation coil are $260\;{\mu}m$ and $520\;{\mu}m$, respectively. The fluxgate sensor consists of five PCB stack layers including one layer of magnetic core and four layers of excitation and pick-up coils. The center layer as magnetic core is made of a Co-based amorphous magnetic ribbon with extremely high DC permeability of ${\sim}100,000$ and has a rectangular-ring shape to minimize the magnetic flux leakage. Four outer layers as excitation and pick-up coils have a planar solenoid structure and are made of copper foil. In case of the fluxgate sensor having the excitation coil pitch of $260\;{\mu}m$, excellent linear response over the range of $-100\;{\mu}T$ to $+100\;{\mu}T$ is obtained with sensitivity of 780 V/T at excitation sine wave of $3V_{p_p}$ and 360 kHz. The chip size of the fabricated sensing element is $7.3\;{\times}\;5.7\;mm^2$. The very low power consumption of ${\sim}8\;mW$ is measured. This magnetic sensor is very useful for various applications such as: portable navigation systems, telematics, VR game and so on.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.537-542
• /
• 2016

In this study, we have prepared mesophase pitch from pyrolysis fuel oil (PFO) by heterogeneous reforming process. This process was conducted by direct fluorination at various temperature and followed by the heat treatment at $390^{\circ}C$. The reformed pitch was then investigated by softening point analysis, elemental analysis, fourier-transform infrared spectroscopy, high resolution X-ray diffraction and polarization microscope analysis. Carbon contents of reformed pitch increased according to increasing the reaction temperature of fluorination, while oxygen, nitrogen and sulfur contents were completely eliminated. As the fluorination temperature increased, the creation, growth, coalescence and alignment process of mesophase spheres were observed. Also the interlayer spacing of carbon hexagonal planar structure decreased, while its crystalline size increased. In addition, aromatic ring compound contents increased by the condensation polymerization of aliphatic compound. These results can be attributed to the radical reactivity of the fluorine increased as the reaction temperature increased. It was considered that the fluorination reaction could help PFO to generate aromatic compounds, via promoting polymerization by radical reaction.