• 제목/요약/키워드: rigid wall

검색결과 287건 처리시간 0.028초

2차원 해면효과익의 비정상 성능에 대한 수치적 시뮬레이션 (Numercal Simulation of Unsteady Performance for 20D Surface Effect Airfoils)

  • 박일룡;전호환
    • 한국해양공학회지
    • /
    • 제9권2호
    • /
    • pp.71-74
    • /
    • 1995
  • A numerical model capable of simulating a 2-D airfoil flying over in the vicinity of the waves is discussed. Instead of treating the problem as a heaving oscillation one above the rigid flat wall, sources are distributed on the prescribed wave profile. The wave deformation due to the airfoil is assumed to be negligible and treated as a rigid undulated wall. The source and vortex are distributed on the surface of the foil. It is found that the variation of $C_L$ with wave steepness in severe and that the lift variation due to waves decreases as the wing height above the water surface increases.

  • PDF

A Study on Vortex Pair Interaction with Fluid Free Surface

  • Kim, K.H.;Kim, S.W.
    • 한국분무공학회지
    • /
    • 제10권4호
    • /
    • pp.26-31
    • /
    • 2005
  • Today, the research to examine a fact that interaction between the air and the fluid free surface affects the steady state flow and air. We proved the interaction between vortex pairs and free surface on each condition that is created by the end of delta wings. Another purpose of this study is to investigate the effect of surface active material which call change the surface tension and we must consider when we refer to turbulent flow on surface tension. Therefore, this research examined the growth process of vortex pairs on condition of clean, contaminated free surface and wall after we made vortex pairs through counter rotating flaps. The results of this study suggest that vortex pairs in clean free surface rise safely but the vortex pairs in contaminated free surface and rigid, no slip is made secondary vortex or rebounding. However the secondary vortex in rigid, no slip is stronger than before. and we can find the vortex shape which roll up more completely. However, these will disappear by the effect of wall.

  • PDF

The effect of architectural form on the earthquake behavior of symmetric RC frame systems

  • Inan, Tugba;Korkmaz, Koray;Cagatay, Ismail H.
    • Computers and Concrete
    • /
    • 제13권2호
    • /
    • pp.271-290
    • /
    • 2014
  • In this study, structural irregularities in plan, which has a considerable effect on earthquake behavior of buildings, have been investigated in detail based on Turkish Earthquake Code 2007. The study consists of six main parametric models and a total of 144 sub-models that are grouped based on RC structural systems such as frame, frame + rigid core, frame with shear wall, and frame with shear wall + rigid core. All models are designed to have both symmetrical plan geometry and regular rigidity distribution. Changes in the earthquake behavior of buildings were evaluated according to the number of storeys, number of axes and the configuration of structural elements. Many findings are obtained and assessed as a result of the analysis for each structural irregularity. The study shows that structural irregularities can be observed in completely symmetric buildings in terms of plan geometry and rigidity distribution.

Sternal defect reconstruction using a double-barrel vascularized free fibula flap: a case report

  • Gravina, Paula Rocha;Chang, Daniel K.;Mentz, James A.;Dibbs, Rami Paul;Maricevich, Marco
    • Archives of Plastic Surgery
    • /
    • 제48권5호
    • /
    • pp.498-502
    • /
    • 2021
  • Total and subtotal sternectomy oncological defects can result in large deficits in the chest wall, disrupting the biomechanics of respiration. Reviewing the current literature involving respiratory function and rib motion after sternectomy, autologous rigid reconstruction was determined to provide the optimal reconstructive option. We describe a novel technique for sternal defect reconstruction utilizing a double-barrel, longitudinally oriented, vascularized free fibula flap associated with rib titanium plates fixation. Our reconstructive approach was able to deliver a physiological reconstruction, providing rigid support and protection while allowing articulation with adjacent ribs and preservation of chest wall mechanics.

강성경사면에 인접한 역T형 옹벽에 작용하는 상재하중에 의한 연직토압분포 (Distribution of Vertical Earth Pressure due to Surcharge Loads Acting on Cantilever Retaining Wall Near Rigid Slope)

  • 유남재;이명욱;박병수;홍영길
    • 한국지반공학회논문집
    • /
    • 제18권6호
    • /
    • pp.141-152
    • /
    • 2002
  • 본 논문은 급경사의 강성사면에 인접한 역 T형 옹벽에 작용하는 상재하중에 의한 연직 토압분포에 관한 실험적 수치해석적 연구결과이다. 강성사면의 조도, 사면과 옹벽 사이의 거리, 중력수준을 변화시킨 원심모형실험을 실시하고 옹벽 뒷채움재에 토압계를 매설하여 연직토압을 측정하였다. 상재하중에 의한 연직토압 분포에 관한 실험 결과를 기존의 두가지의 한계평형 해석이론 및 수치해석 결과와 각각 비교 분석하였다. 정성교(1993, 1997)에 의하여 제시된 보완 사이로이론과 흙쐐기이론을 사용한 한계 평형 해석법을 사용하였으며 그 이론을 확장하여 옹벽 배면 뒷채움재에 작용하는 상재하중에 의한 연직토압분포에 대한 특별해를 구하였다. 수치해석에서는 쌍곡선모델의 흙의 구성관계식이 적용된 FLAC 프로그램을 사용하였다. 수치해석에 의한 토압분포 산정 결과 원심모형실험 결과와 대부분의 경우에서 서로 일치하는 반면에 흙쐐기이론에서는 사면과 옹벽의 거리가 가까운 경우에 한하여 비교적 일치하는 경향을 보였다.

Crib Wall System 변위해석에 관한 연구 (Study on the Displacement of Crib Wall System)

  • 김두준;이송
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제6권3호
    • /
    • pp.201-209
    • /
    • 2002
  • Crib wall system은 일반적으로 segmental crib type의 옹벽형식으로 stretcher라는 전 후면 가로보와 세로 방향으로 header라는 버팀보를 연속적으로 쌓아 올리는 공법이다. 이때, stretcher와 header로 구성된 골격 내부에는 흙으로 속채움을 하여 다져, 본 구조체가 일체거동이 가능한 강성체(rigid body)를 형성시킴으로써 배면의 토압에 대하여 저항하는 구조물이다. 따라서, 안정성 해석은 일반적으로 기존의 철근콘크리트 옹벽과 같이 전체 옹벽이 하나의 강성체로 작용한다고 가정하여 토압이론에 의하여 평가하고 있다. 그러나, 변형문제에 있어서 본 구조물은 단순히 하나의 구조체로 가정하여 해석하기가 곤란하다. 왜냐하면, stretcher와 header는 일반 보강토옹벽의 전면 벽체 부재와는 달리 뒷채움재 내에 어떠한 인장 보강재도 삽입되지 않기 때문에 독립된 변위거동을 나타낸다. 또한, 각각의 독립부재로 구성된 재료와 내부채움재의 힘과 변형은 3차원적으로 거동하며 수평토압에 의하여 복합적인 상호거동을 일으키기 때문이다. 따라서, 본 연구는 Crib wall system의 변위경향을 보다 엄밀하게 해석하기 위하여 Brandl(1985)의 full scale 시험 결과를 바탕으로 수치해석 모델을 제시하였다.

이차원 T형강체를 이용한 중심코어를 가진 전단벽-골조 구조물의 효율적인 지진해석모델 개발 (Development of Efficient Seismic Analysis Model using 2D T-Shape Rigid-body for Wall-Frame Structures with a Central Core)

  • 박용구;이동근;김현수
    • 한국전산구조공학회논문집
    • /
    • 제26권1호
    • /
    • pp.9-17
    • /
    • 2013
  • 본 연구에서는 고층 전단벽-골조 구조시스템의 효율적인 해석모델을 제안하였다. 전단벽-골조구조시스템은 휨거동하는 전단벽과 전단거동하는 골조로 구성된다. 그리고 전단벽-골조구조시스템의 변형형상은 골조와 전단벽의 상호작용으로 결정된다. 효율적인 해석모델에서는 이러한 거동특성을 반영되어야 하므로 골조와 전단벽을 분리하여 동적인 거동특성을 반영할 필요가 있다. 본 연구에서는 벽체부와 골조부를 분리하기 위하여 T형 강체를 전단벽의 위치에 대체하는 방법을 사용하였다. 분리한 벽체부와 골조부 각각의 등가모델을 구성한 후 결합시키는 방법으로 고층 전단벽-골조구조시스템의 등가모델을 완성하였다. 제안한 등가모델의 정확성과 효율성을 검증하기 위하여 고층의 전단벽-골조 구조물의 시간이력해석을 수행하였고, 그 결과 제안한 등가모델이 해석시간과 컴퓨터 메모리를 현저하게 줄이면서도 정확한 결과를 도출하였다.

형상비가 다른 T형벽체의 유효폭 산정을 위한 비선형 FEM 해석 (A Study on Nonlinear FEM Analysis for the Effective Widths of T-shaped Structural Walls with Different Aspect Ratios)

  • 조남선;하상수;오영훈;이리형
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.67-74
    • /
    • 2001
  • In domestic, irregular walls such as T, L, H and Box shapes are considered as rectangular wall in the design of bearing wall apartment building. The strengths of walls, therefore, can be underestimated in case of using the current design process. Irregular walls are connected to each other as rigid joint so that part of the load can be resisted by the wall perpendicular to the load direction. This resistance can be caused by the effective width of perpendicular wall. This additional resistance by the perpendicular wall increases the strength of structural walls. The objective of this study is to evaluate the effective widths of flanged walls with different aspect ratios by using FEM analyses. the results from finite element method are compared with effective flange widths of some code provisions.

  • PDF

The influence of the initial strains of the highly elastic plate on the forced vibration of the hydro-elastic system consisting of this plate, compressible viscous fluid, and rigid wall

  • Akbarov, Surkay D.;Ismailov, Meftun I.;Aliyev, Soltan A.
    • Coupled systems mechanics
    • /
    • 제6권4호
    • /
    • pp.439-464
    • /
    • 2017
  • The hydro-elastic system consisting of a pre-stretched highly elastic plate, compressible Newtonian viscous fluid, and the rigid wall is considered and it is assumed that on the plate a lineal-located time-harmonic force acts. It is required to investigate the dynamic behavior of this system and determine how the problem parameters and especially the pre-straining of the plate acts on this behavior. The elasticity relations of the plate are described through the harmonic potential and linearized (with respect to perturbations caused by external time-harmonic force) form of these relations is used in the present investigation. The plane-strain state in the plate is considered and the motion of that is described within the scope of the three-dimensional linearized equations of elastic waves in elastic bodies with initial stresses. The motion of the fluid is described by the linearized Navier-Stokes equations and it is considered the plane-parallel flow of this fluid. The Fourier transform with respect to the space coordinate is applied for a solution to the corresponding boundary-value problem. Numerical results on the frequency response of the interface normal stress and normal velocity and the influence of the initial stretching of the plate on this response are presented and discussed. In particular, it is established that the initial stretching of the plate can decrease significantly the absolute values of the aforementioned quantities.

협착 동맥혈관의 혈류유동 모델링 (Modeling of Hemodynamics in Stenosed Artery)

  • 김성종;박영란;김상진;강형섭;김진상;오성훈;강성준;김기범
    • 한국산학기술학회논문지
    • /
    • 제13권5호
    • /
    • pp.2285-2290
    • /
    • 2012
  • 동맥경화는 혈관 안에서 콜레스테롤의 침착 때문에 혈관이 좁아지거나, 딱딱해 지거나, 두꺼워 지게 되는데, 이런 현상이 심해지게 되면 동맥은 단단해져서 혈액이 원활히 통과하지 못하게 되고 심하면 사망 까지 이르게 되는 것이다. 본 연구에서는 복대동맥에서의 동맥경화가 진행되는 것을 탄성 혈관 일 때와 강성 혈관 일 때 각각 협착률이 혈관 직경의 20과 45%로 설정하고 속도와 압력 변화를 살펴보기 위하여 유한 요소 해석을 이용하여 모델링을 하였다. 혈관이 탄성 혈관일 때 속도와 압력 값은 협착률이 혈관 직경의 20%일 때 보다 45%일 때 더 높게 나타났으며, 강성 혈관에서 속도와 압력 값은 협착률이 혈관 직경의 20%일 때보다 45%에서 더 높았다. 협착률이 혈관 직경의 20과 45%인 탄성 혈관에서 재순환영역이 나타났다. 본 연구결과 혈관 협착에 따른 혈류역학적 특징을 이해하는데 도움이 될 것으로 판단된다.