• 제목/요약/키워드: ridge orientation

검색결과 28건 처리시간 0.026초

시설방향이 시설내 환경과 촉성재배 토마토 생육에 미치는 영향 (Effects of Greenhouse Orientation on the Greenhouse Environment and the Growth of Tomato in Forcing Culture)

  • 최영하;박경섭;강남준;김홍림;곽용범;김형득;구대회;조명환
    • 생물환경조절학회지
    • /
    • 제19권1호
    • /
    • pp.6-11
    • /
    • 2010
  • 시설 내 PPFD는 오전에는 남북동이, 오후에는 동서동이 높았다. 일평균 PPFD는 동서동이 높았는데, 이는 태양광의 입사각이 작아질 때 동서동의 수광면적이 증가되기 때문인 것으로 조사되었다. 고랑위 60cm 높이의 PPFD는 전 고랑에서 남북동이 동서동보다 높았으나 수량과는 관련이 없었다. 평균 기온은 동서동이 높았으나 2월중순 이후로는 태양고도가 높아짐에 따라 차이가 없었다. 지온은 동서동이 다소 높았고 이랑 간에 차이가 없었다. 과실수량은 동서동이 8% 많았는데, 이는 남쪽이랑의 과실이 수확기가 빨라서 초기수량이 많았기 때문이다. 동계 단동형 비닐하우스를 이용한 토마토 촉성재배는 반촉성재배와는 달리, 동서동 시설을 이용하는 것이 유리하였다.

적응적 거리를 이용한 지문 정합 방법 (Fingerprint Minutia Matching Using Adaptive Distance)

  • 이동재;김선주;이상준;김재희
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
    • /
    • pp.263-266
    • /
    • 2000
  • We proposes a new fingerprint minutia matching algorithm which matches the fingerprint minutiae by using adaptive distance. In general, fingerprint is deformed by pressure and orientation when a user press his fingerprint to sensor. These nonlinear deformations change the distance between minutiae and reduce verification rate. We define the adaptive distance using ridge frequency. Adaptive distance normalizes the distance between minutiae and compensates for nonlinear deformation. Our algorithm can distinguish two different fingerprints better and is more robust. Experimental results show that the performance of the proposed algorithm is superior to using Euclidean distance.

  • PDF

Chain orientation and Degradation Behavior of Poly[(R)-3-hydroxybutyrate] Lamellar Crystals

  • 이원기;조남주;하창식
    • Bulletin of the Korean Chemical Society
    • /
    • 제22권8호
    • /
    • pp.872-876
    • /
    • 2001
  • Topological changes caused by the alkaline and enzymatic attacks of solution-grown, chain-folded lamellar crystals (SGCs) of poly[(R)-3-hydroxybutyrate] P(3HB) have been studied in order to investigate the chain-folding structure in P(3HB) crystal regions. NaOH and an extracellular PHB depolymerase purified from Alcaligenes faecalis T1 were used for alkaline and enzymatic hydrolysis, respectively. The measurements were performed on crystals attached to a substrate which is inactive to degradation mediums. Both alkaline and enzymatic attacks lead to a breakup of the lamellar crystals along the crystallographic b-axis during initial erosion. Since hydrolysis preferentially occurs in amorphous regions, this morphological result reflects relatively loosely packed chains in core parts of lamellar crystals. Additionally, it was supported by the ridge formation along the b-axis in the lamellar crystals after thermal treatment at a low temperature because of the thermally sensitive nature of the loosely packed chains in lamellar crystals. However, the alkaline hydrolysis accompanied the chain erosions or scissions in quasi-regular folded lamellar surfaces due to smaller size of alkaline ions in comparison to the enzyme, resulting in the decrease of molecular weight.

Soft and Hard Tissue Augmentation with/without Polydeoxyribonucleotide for Horizontal Ridge Deficiency: A Pilot Study in a Dog Model

  • Hyunwoo Lim;Yeek Herr;Jong-Hyuk Chung;Seung-Yun Shin;Seung-Il Shin;Ji-Youn Hong;Hyun-Chang Lim
    • Journal of Korean Dental Science
    • /
    • 제17권2호
    • /
    • pp.53-63
    • /
    • 2024
  • Purpose: To investigate the effects of simultaneous soft and hard tissue augmentation and the addition of polydeoxyribonucleotide (PDRN) on regenerative outcomes. Materials and Methods: In five mongrel dogs, chronic ridge defects were established in both mandibles. Six implants were placed in the mandible, producing buccal dehiscence defects. The implants were randomly allocated to one of the following groups: 1) control: no treatment; 2) GBR: guided bone regeneration (GBR) only; 3) GBR/PDRN: GBR+PDRN application to bone substitute particles; 4) GBR/CTG: GBR+connective tissue grafting (CTG); 5) GBR/VCMX: GBR+soft tissue augmentation using volume stable collagen matrix (VCMX); and 6) group GBR/VCMX/PDRN: GBR+VCMX soaked with PDRN. The healing abutments were connected to the implants to provide additional room for tissue regeneration. Submerged healing was achieved. The animals were euthanized after four months. Histological and histomorphometric analyses were then performed. Results: Healing abutments were gradually exposed during the healing period. Histologically, minimal new bone formation was observed in the dehiscence defects. No specific differences were found between the groups regarding collagen fiber orientation and density in the augmented area. No traces of CTG or VCMX were detected. Histomorphometrically, the mean tissue thickness was greater in the control group than in the other groups above the implant shoulder (IS). Below the IS level, the CTG and PDRN groups exhibited more favorable tissue thickness than the other groups. Conclusion: Failure of submerged healing after tissue augmentation deteriorated the tissue contour. PDRN appears to have a positive effect on soft tissues.

손상된 지문에 강건한 \alpha$-trimmed mean 방향성 추출 알고리즘 (An \alpha$-trimmed mean orientation extraction algorithm which is robust to scarred fingerprint)

  • 신종욱;윤병우;송종관
    • 한국정보통신학회논문지
    • /
    • 제8권4호
    • /
    • pp.854-860
    • /
    • 2004
  • 지문 정합 시 입력지문의 품질 및 지문의 상태에 따라서 지문정합 결과가 다르게 나타나게 된다. 잡음이 섞여 입력지문의 품질이 떨어지거나 지문의 상처로 인하여 입력지문에 융선이 없어진 경우에는 잘못된 방향성 정보를 도출해 낼 수 있다. 지문 정합에서 방향정보는 가짜 특징점 제거, 융선 거리 측정, 매칭, 중심점 및 삼각주 찾기 둥에 아주 중요한 요인으로 작용한다. 잘못된 방향성을 도출하게 되면 지문인식에 많은 오차를 수반하게 되므로 잘못된 방향성 정보를 보완하거나 교정하는 방법이 필요하다. 본 논문에서는 입력지문이 상처 둥으로 인하여 손상된 경우에 잘못된 방향성 정보를 재구성하기 위한 방법으로 저역통과 필터를 거친 후 \alpha$-trimmed mean 필터를 이용하여 방향성 정보를 보완 및 교정하는 방법에 대하여 제시한다.

표면 거칠기를 고려한 볼 조인트 접촉의 미세 탄성유체윤활 해석 (Micro-EHL Analysis of a Ball Joint Contact with Surface Roughness)

  • 김태종
    • Tribology and Lubricants
    • /
    • 제19권3호
    • /
    • pp.123-132
    • /
    • 2003
  • The effect of surface texture on elastohydrodynamic lubrication (EHL) point contact of a ball Joint mechanism in small reciprocating compressors is studied numerically by using multigrid method. Pressure and film thickness profiles have been calculated for surface roughness with waviness of different orientations and transverse ridge and dent at minimum and maximum Hoes M parameter conditions. The influence of the amplitude and the wavelength of the surface roughness was also studied. Results show that the oblique waviness with orientation angle of 30$^{\circ}$generates the smallest minimum film thickness as compared with those of longitudinal, transverse, and other oblique roughness. The influence of transverse waviness on the minimum film thickness is smaller than for the longitudinal waviness case.

거친사각채널에서 왕복운동이 열전달에 미치는 효과 (The Effect of Reciprocating Motion on Heat Transfer in the Roughened Rectangular Channel)

  • 안수환;손강필
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제26권6호
    • /
    • pp.646-652
    • /
    • 2002
  • The influence of reciprocating frequency and radius on heat transfer in the roughened rectangular channel is experimentally investigated. The aspect ratio (width/height) of the duct is 2.33 and the rib height is one fifteenth of the duct height. And the ratio of rib-to-rib distance to rib height is 10. The discrete ribs were periodically attached to the button wall of the duct with a parallel orientation. The parametric test matrix involves Reynolds number, reciprocating, and reciprocating radius, in the ranges, 1,000∼6,000, 1.7∼2.5 HB and 7∼15cm, respectively. The combined effects of reciprocating frequency and reciprocating radius have considerable influence on the heat transfer due to the modified vortex flow structure.

Two newly recorded wolf spiders with one new species(Araneae, Lycosidae) from Korea

  • Kim, Seung-Tae;Yoo, Jung Sun
    • Journal of Species Research
    • /
    • 제8권3호
    • /
    • pp.283-287
    • /
    • 2019
  • Pardosa pseudolaevitarsis n. sp. and Hygrolycosa umidicola Tanaka, 1978 belonging to Lycosidae are described from Korea. To date, fourteen species in the genus Pardosa C. L. Koch, 1847 have been described from Korea. H. umidicola belongs to Hygrolycosa Dahl, 1908 was once described from Korea, but the previous description of this species could not provide adequate scientific evidence for adding H. umidicola to the Korean spider fauna. Pardosa pseudolaevitarsis n. sp. is similar to P. laevitarsis Tanaka & Suwa, 1986 in the shape of its epigyne and palp, but can be distinguished by the followings: epigynal atrium small; spermathecae extending to the end of atrium; shape, location and orientation of fertilization duct in epigyne and internal genitalia; blunt basal spur of median apophysis in palp; number, shape and arrangement cheliceral teeth on both margins. Both species were collected using pitfall traps on a ridge between rice fields and seem to prefer habitats with relatively high humidity.

An Efficient Fingerprint Matching by Multiple Reference Points

  • Khongkraphan, Kittiya
    • Journal of Information Processing Systems
    • /
    • 제15권1호
    • /
    • pp.22-33
    • /
    • 2019
  • This paper introduces an efficient fingerprint matching method based on multiple reference minutiae points. First, we attempt to effectively align two fingerprints by employing multiple reference minutiae points. However, the corresponding minutiae points between two fingerprints are ambiguous since a minutia of one fingerprint can be a match to any minutia of the other fingerprint. Therefore, we introduce a novel method based on linear classification concept to establish minutiae correspondences between two fingerprints. Each minutiae correspondence represents a possible alignment. For each possible alignment, a matching score is computed using minutiae and ridge orientation features and the maximum score is then selected to represent the similarity of the two fingerprints. The proposed method is evaluated using fingerprint databases, FVC2002 and FVC2004. In addition, we compare our approach with two existing methods and find that our approach outperforms them in term of matching accuracy, especially in the case of non-linear distorted fingerprints. Furthermore, the experiments show that our method provides additional advantages in low quality fingerprint images such as inaccurate position, missing minutiae, and spurious extracted minutiae.

Effects of Mechanical Stimuli on the Cell Proliferation and Collagen Production on the Micropatterned Substrate

  • ;;;;;;;신정욱
    • 대한의생명과학회지
    • /
    • 제12권2호
    • /
    • pp.119-125
    • /
    • 2006
  • In relation to the tissue engineering, the cellular responses to the morphology of the scaffold surface are interesting topics. Human ligament fibroblasts (HLFs) were cultured on the micrpatterned silicone substrates subjected to cyclic stretch to simulate ligament motion. Groove and ridge width of silicone substrates was 10/50, 20/50, 20/10, and 20/20 ${\mu}m$ (groove/ridge ${\mu}m$) with a depth of $3{\mu}m$. Strain was applied over two days for 4 hours per day with a frequency of 0.5 Hz with the magnitudes of 4 or 8%. The purpose of this study was to evaluate ligament fibroblast alignment and cellular responses in relation to the pattern of microgrooved surface and stretching magnitude. Ligament fibroblasts in the microgrooved surface were elongated and aligned parallel to the microgrooves under no stretch. Uniaxial cyclic stretch induced cellular activities and their orientation rise in cellular response and the cells showed alignment and elongation perpendicular to the direction of the stretch. Biochemical analyses showed that the best cellular response was found on the $20/50{\mu}m$ under 8% stretch. The surface morphology and mechanical stretching were found to contribute to increase of proliferation, collagen production.

  • PDF