• Journal of Biosystems Engineering
• /
• v.25 no.1
• /
• pp.39-46
• /
• 2000

This work was conducted to study the operating characteristics of a grinding system designed to obtain fine rice husk ash powder. To find better utilizing of rice husk, a valuable by-product from rice production, once the rice husk was incinerated and the thermal energy was recovered from the furnace, the ash was fed and pulverized in the grinding system resulting a fine powder to be used as a supplementary adding material to the portland cement manufacturing . The rice husk ash grinding system consisted of a high speed centrifugal fan for the preliminary coarse milling and a dry-type stirred ball mill for the subsequent fine grinding . Total grinding time 9 5, 15, 30, 45 min), impeller speed (250, 500, 750 rpm) , and mixed ratio (4.8, 7.9, 14.9) were three operating factors examined for the performance of a stirred ball mill used for the fine grinding of ash. With the stirred ball mill used in this study, the minimum attianable mean diameter of rice husk ash powder appeared to be 2 ${\mu}{\textrm}{m}$. During the find grinding, the difference in specific surface area of powder showed an increase and the grinding energy efficiency decreased with the increase in total grinding time, impeller speed ,and mixed ratio. For the operating conditions employed , the resulting mean diameter of fine ash powder, specific energy input, and grinding energy efficiency were in the range of 1.79 --16.04${\mu}{\textrm}{m}$, 0.072-5.226kWh/kg, an d1.11-12.15$m^2$/Wh, respectively. Grinding time of 30 min , impeller speed of 750 rpm, and mixed ratio of 4.8 were chosen as the best operating conditions of the stirred ball mill for fine grinding . At these conditions, mean particle diameter of the fine ash, grinding energy efficiency, grinding throughtput, and specific energy input were 2.73${\mu}{\textrm}{m}$, 3.95$m^2$/Wh, 0.25kg/h, and 1.22kWh/kg, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.2
• /
• pp.108-111
• /
• 2005

A field study was conducted to develop an economically suitable combination of organic and inorganic fertilizers for sugarcane cultivation in sandy acidic soil of a commercial sugarcane farm under Old Himalayan Piedmont Plain of Bangladesh. Results revealed that the treatment $T_4$ which received $75\%$ of Recommended fertilizers (N 120, P 35, K 100, S 25, Zn 2 kg $ha^{-1}$) + 10 Mg $ha^{-1}$ Rice mill ash + Mg $ha^{-1}$ press mud significantly produced higher sugarcane yield (72.34 Mg $ha^{-1}$) among all the treatments except $T_5$ having $100\%$ of Recommended fertilizers + 10 Mg $ha^{-1}$ Rice mill ash + 10 Mg $ha^{-1}$ press mud, which was identical. $T_4$ also gave the highest net economic benefit at Bangladesh Taka 15,920.47 per hectare from the added nutrient management. Thus, the integrated use with organic and inorganic fertilizer is highly essential for sustainable production of sugarcane in commercial farm of the region in Bangladesh, where it has been grown year after year.

• Journal of Biosystems Engineering
• /
• v.31 no.1 s.114
• /
• pp.33-38
• /
• 2006

This work was conducted to find the operating characteristics of an efficient wet grinding system designed to obtain fine rice husk ash powder. Once the rice husk was combusted and the thermal energy was recovered from the furnace, the ash was fed and pulverized in the grinding system resulting a fine powder to be used as a supplementary adding material to the portland cement. Grinding time (15, 30, 45 min), impeller speed (250, 500, 750 rpm), and mixed ratio (6.7, 8.4, 11.l, 20.9) were three operating factors examined for the performance of a wet-type stirred ball mill grinding system. For the operating conditions employed, mean diameter of fine ash powder, specific energy input, and grinding energy efficiency were in the range of $2.83{\sim}9.58{\mu}m,\;0.5{\sim}6.73kWh/kg,\;and\;0.51{\sim}3.27m^2/Wh$, respectively. With the wet-type stirred ball mill grinding system used in this study, the grinding energy efficiency decreased with the increase in total grinding time, impeller speed, and mixed ratio. The difference in specific surface area of powder linearly increased with logarithm in total number of impeller revolution and the grinding energy efficiency linearly decreased. Grinding time of 45 min, impeller speed of 500 rpm, and mixed ratio of 6.7 were chosen as the best operating condition. At this condition, mean particle diameter of the fine ash, grinding energy efficiency, grinding throughput, and specific energy input were $2.84{\mu}m,\;2.28m^2/Wh,\;0.17kg/h$, and 2.03kWh/kg, respectively. Wet fine grinding which generates no fly dust causing pollution and makes continuous operation easy, is appeared to be a promising solution to the automatization of rice husk ash grinding process.

• Advances in concrete construction
• /
• v.5 no.3
• /
• pp.289-301
• /
• 2017

The synergistic interactions of supplementary cementitious materials (SCMs) with ordinary portland cement (OPC) in multi-blended systems could enhance the mechanical and durability properties of concrete and increase the amount of cement that can be replaced. In this study, the characteristics of the hydration products as well as paste microstructure of blended cement containing 20% coal fly ash, 10% rice hull ash and 10% sugar mill lime sludge in quaternary blended system was investigated. Portlandite content, hydration products, compressive strength, pore size distribution and microstructural architecture of hydrated blended cement pastes were examined. The quaternary blended cement paste showed lower compressive strength, reduced amount of Portlandite phases, and higher porosity compared to plain hardened cement paste. The interaction of SCMs with OPC influenced the hydration products, resulting to the formation of ettringite and monocarboaluminate phases. The blended cement paste also showed extensive calcium silicate hydrates and calcium aluminate silicate hydrates but unrefined compared to plain cement paste. In overall, the expected synergistic reaction was significantly hindered due to the low quality of supplementary cementitious materials used. Hence, pre-treatments of SCMs must be considered to enhance their reactivity as good quality SCMs can become limited in the future.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.546-551
• /
• 1993

Rice flour obtained by four different milling methods, Pin mill. Colloid mill, Micro mill, and Jet mill, were used to investigate physico-chemical properties and product. Crude fat, ash, and protein contents of rice flours between different milling methods were similar. Blue value, amylose content, and damaged starch which related to properties of rice flour were reduced in the order that of Jet mill, Micro mill, Colloid mill, and Pin mill. Water absorption index, water solubility index, and water retention capacity increased as damaged starch increased. Hardness of gel(15%) is the highest value for Pin mill. The finer granules (Jet mill) had lower gelatinization onset(To) and peak(Tp) than any other rice flours. Those result are simillar with amylogram properties. Enthalpy of gelatinization increased as damaged starch increased. Jet mill had the highest score (p<0.05) of overall test in sensory evaluation and good paste properties.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.8
• /
• pp.1076-1083
• /
• 2009

The physicochemical properties of rice flour produced by 3 different grinding methods using various steeping times (3, 6, 9, and 12 hrs) were investigated. Roller mill gave coarse rice flour; the pin mill, intermediate flour; and mixed when both (roller & pin mills) were used. With the increase of steeping times, the rice flours became finer and the contents of crude protein, crude fat and crude ash decreased. Damaged starch was noticeably high in rice flour by roller & pin mills compared to those by roller or pin mills alone. Amylose contents, solubility and swelling power increased as the steeping times increased. Water binding capacity was the highest in roller & pin mills, followed by pin mill. In scanning electron microscope (SEM), pin mill showed distribution of separated fine particles of rice flours. The physicochemical properties of rice flours showed many differences by steeping times of rice and grinding methods. With sufficient steeping times, the rice flours obtained from pin mill were relatively fine having less damaged starch.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.12a
• /
• pp.250-258
• /
• 1998

• Advances in concrete construction
• /
• v.9 no.2
• /
• pp.139-147
• /
• 2020

This paper reports the effect of Rice Husk Ash (RHA) in geopolymer concrete on strength, durability and microstructural properties under ambient curing at a room temperature of 25℃ and 65±5% relative humidity. Rice husk was incinerated at 800℃ in a hot air oven. and ground in a ball mill to achieve the required fineness. RHA was partially added in 10, 15, 20, 25, 30 and 35 percentages to fly ash with 10% of GGBS to produce geopolymer concrete. Test results exhibit that the substitution of RHA in geopolymer concrete resulted in reduced strength properties during initial curing. In the initial stage, workability of GPC mixes was affected by RHA particles due to the presence of dormant particles in it. It is evident from the microstructural study that the presence of RHA particles densifies the matrix reducing porosity in concrete. This is due to the presence of RHA in geopolymer concrete, which affects the ratio of silica and alumina, resulting in polycondensation reactions products. This study suggests that incorporation of rice husk ash in geopolymer concrete is the solution for effective utilization of waste materials and prevention of environmental pollution due to the dumping of industrial waste and to produce eco-friendly concrete.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1742-1748
• /
• 2014

This study investigated the quality characteristics of commercial rice flour (CRF) and rice flours prepared by different milling methods for sulgidduk. For particle distribution, dried rice flour after the 1st roll mill using a pin mill showed a particle size of greater than $710{\mu}m$, whereas a particle size less than $250{\mu}m$ accounted for 48% of whole rice flour. This proportion was higher than CRF after the 2nd step roll mill. Crude protein, lipid, and ash contents were significantly highest in 1st roll mill samples. For color, roll & pin made up of many small particles showed a high L value. CRF and roll & pin showed significantly higher starch damage and water-holding capacity, whereas pasting temperature, peak viscosity, and setback of RVA pasting characteristics were lower than 1st roll mill. When rice cakes were made from three kinds of rice flour, roll & pin was not significantly different compared to the CRF. However, rice cakes made with 1st roll milled rice flour showed rough crumb and crust. Rice cake made with roll & pin or CRF showed similar characteristics for texture. In the quantitative descriptive analysis, rice cake made with roll & pin showed better appearance, flavor, taste, texture, and overall acceptability than CRF and 1st roll mill. Therefore, rice flour prepared by roll & pin could be applied to sulgidduk with high quality.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.234-243
• /
• 1999