• Korean Journal of Food Science and Technology
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1973

Noodles and cookies were made from composite flours based on domestic resources and their quality was assessed to obtain the following results. 1) Various flours containing $10{\sim}20%$ defatted soy flour did not form belt in noodle-making process, but the use of 1.5% GMS + 2% Methocel as binder was very effective in noodle-belt formation and cooking quality. 2) Out of four raw flours, naked barley flour was most suitable for noodle-making. Addition of wheat flour at 25% or 50% level into the four composite flours greatly improved the quality of noodles and particularly that based on naked barley was similar to wheat flour in color and gave rather palatable taste. 3) Though cookie could be made from any composite flours without using GMS or CSL, naked barley flour was the best in sensory evaluation of the product. 4) Addition of wheat flour at 25% or 50% level into above composite flours gave cookies comparable to standard wheat product except the case of composite flour based on defatted rice bran.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.196-204
• /
• 2011

Heat-moisture treatment (HMT) was applied to 4 samples of rice flours, Goami (GM), Taeguk (TG), Choochung (CC) and Koshihikari (KSHK), of which amylose contents were 31.5, 32.3, 24.3, and 23.3%, respectively. Wet-milled rice flours were dried, moisture content adjusted to 21, 24, 27 and 30%, respectively, and autoclaved at 100 and $105^{\circ}C$ for 30~90 min. The changes on swelling, solubility, RVA (rapid visco analyser) paste viscosities and gel strength were observed. In GM and TG, peak viscosity (PV) and breakdown (BD) decreased and no peak appeared as moisture and treatment time increased by HMT. In CC, FV increased notably with big increase of PV and setback (SB) by HMT compared to the other rice flours. BD in all the samples decreased as moisture, temperature, and time increased by HMT. RVA pasting properties of HMT GM and HMT TG were changed remarkably under conditions of moisture 21%, $100^{\circ}C$ and 30 min whereas for HMT CC and HMT KSHK, higher temperature or more time was required at the same mois ture levels. The swelling power, solubility and gel strength increased by HMT. Gel strength correlated positively with SB (r=0.78, p<0.01) and negatively with BD (r=-0.71, p<0.01) and PV (r=-0.36, p<0.05) resulting from strengthening the structure of starch granules in rice flours by HMT.

• Korean Journal of Food Science and Technology
• /
• v.25 no.5
• /
• pp.541-545
• /
• 1993

Two different methods (Sieve shaker, Elzone particle size analyzer) were used to investigate rice flour particle size obtained by various milling method. Results of Elzone particle size analyzer were more effective than Sieve shaker in determining particle size, and the distribution of particle size of rice flours was affected by the type of the milling methods used. A rice flour, prepared in a Pin mill had a particle size range of $60{\sim}500$ mesh, and 30.38% of the sample was in the particle size range $200{\sim}270$ mesh. A rice flour, prepared in a Colloid mill had a particle size range of $40{\sim}500$ mesh and more of flour particles appeared in the range $140{\sim}200$ mesh than any other particle size. A rice flour, prepared in a Micro mill had a particle size range of $140{\sim}500$ mesh, and 41.62% of the sample was in the particle size range over 500 mesh. A rife flour, prepared in a Jet mill had a finer flour particle size was over the particle size range 500 mesh. The finer rice flour gave the highest L value and the lowest a value. The wet-milled flour particles were observed as a cluster of starch granules and the particles of rice flour (dry-milling) were observed as fragment of rice grains. Scanning Electron Photomicrographs revealed that visual differences in structure between milling methods, and similar results with Elzone particle size analyzer method in particle size.

• Korean Journal of Human Ecology
• /
• v.3 no.2
• /
• pp.68-76
• /
• 2000

The quality of Injulmi, waxy rice cake is affected by milling methods. varieties. additives, steeping condition before milling and the texture properties during storage. Sinsunchalbyeo and Hwasunchalbyeo flours were made using pin-dry milling(PDM) and roller-wet milling( RWM) methods. Injulmi was made from those flours with different sugars, sucrose, maltose. oligosaccharide, and were measured textural properties of Injulmi stored at 2 $0^{\circ}C$ for 0, 12, 36 and 60 hrs, respectively. The hardness of sucrose added to injulmi made from PDM flour was the highest among any other sugars, but Injulmi from RWM flour was increased in the following order sucrose>maltose>oligosaccharide>non - added Injulmi. Adhesiveness of none added Injulmi were the lowest among sugar added Injulmi including, oligosaccharide, maltose and sucrose added Injulmi.

• Korean journal of food and cookery science
• /
• v.20 no.4
• /
• pp.342-351
• /
• 2004

Rice flour was roasted at different temperatures and times and tarakjuk was made from these roasted rice flours. Chemical composition, in vitro starch digestibility (IVSD) and protein digestibility (IVPD) of the roasted rice flours and tarakjuk were determined. Changes in quality characteristics such as pH, viscosity, IVSD and IVPD of tarakjuk during refrigerated storage were also investigated. For roasted rice non, the protein content ranged from 6.52∼7.13% on a dry basis, while for tarakjuk, the range was 3.74 ∼4.0%. On the other hand, the Ca level of tarakjuk ranged from 1,278.36∼1,340.87 ppm. Rice flours showed decreasing IVSD and increasing IVPD on roasting at 145$^{\circ}C$ and 165$^{\circ}C$, whereas they showed increasing IVSD and decreasing IVPD at 185$^{\circ}C$, respectively. Roasting also influenced the pH, viscosity, IVSD md IVPD of tarakjuk made from these roasted rice flours. As the roasting temperature and time increased, tarakjuk showed lower pH and viscosity, however it showed higher IVSD and IVPD. The pH of tarakjuk, except that of control, decreased with storage, whereas viscosity increased significantly. IVSD decreased up to 4 days of storage, after which it increased again until 14 days of storage. On the other hand IVPD increased up to 7 days of storage, but there was no additional significant increase after 14 days of storage. These results suggest that depending on the nutritional purpose, appropriate conditions for roasting of rice flour and storage of tarakjuk may be recommended for the commercialization of tarakjuk.

• Korean journal of food and cookery science
• /
• v.5 no.2
• /
• pp.19-25
• /
• 1989

In order to maks use of Adlay widely, it was analyzed and determined the content of amylose, amylopection. And Ju-ak was made from glutinous rice flours with vairous mixing ratio of Adlay flours and then this was tested for suitability to preparation of Ju-ak. Evaluation was conducted through sensory evaluation and objcetive evaluation. The results are as follow: 1. The content of moisture, total ash, crude protein, crude fat, and carbohydrate in Adlay were shown to be about 10.58%, 84.4%, 17.3%, 3.76%, 66.52%. 2. The amylose and amylopectin content were 15.6%, 84.4%. 3. By the sensory evaluation results the taste of Ju-ak prepared with mixing of 25% and 50% Adlay flour was better than glutinous rice Ju-ak but 75% and 100% mixed flour were undersirable. 4. By the Instron measurement results that hardness tend to increass as the additon level of Adlay increased. Gumminess, Chewiness and Elasticity was not significantly different as the addition level of Adlay increased. Conhesiveness tend to decrease as the addition level of Adlay. 5. Consistency of Ju-ak had significant relationship with hardness and cohesiveness. Moistness had significant relationship with hardness, elasticity, cohesiveness and chewiness. Texture of Ju-ak had significant relationship with hardness, elasticity, cohesiveness and gumminess.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1742-1748
• /
• 2014

This study investigated the quality characteristics of commercial rice flour (CRF) and rice flours prepared by different milling methods for sulgidduk. For particle distribution, dried rice flour after the 1st roll mill using a pin mill showed a particle size of greater than $710{\mu}m$, whereas a particle size less than $250{\mu}m$ accounted for 48% of whole rice flour. This proportion was higher than CRF after the 2nd step roll mill. Crude protein, lipid, and ash contents were significantly highest in 1st roll mill samples. For color, roll & pin made up of many small particles showed a high L value. CRF and roll & pin showed significantly higher starch damage and water-holding capacity, whereas pasting temperature, peak viscosity, and setback of RVA pasting characteristics were lower than 1st roll mill. When rice cakes were made from three kinds of rice flour, roll & pin was not significantly different compared to the CRF. However, rice cakes made with 1st roll milled rice flour showed rough crumb and crust. Rice cake made with roll & pin or CRF showed similar characteristics for texture. In the quantitative descriptive analysis, rice cake made with roll & pin showed better appearance, flavor, taste, texture, and overall acceptability than CRF and 1st roll mill. Therefore, rice flour prepared by roll & pin could be applied to sulgidduk with high quality.

• Korean journal of food and cookery science
• /
• v.25 no.4
• /
• pp.427-434
• /
• 2009

To increase rice consumption and substitute rice flour for wheat flour to make gluten-free bakery products, the physicochemical and pasting properties of rice flours prepared from raw and soaked rices passed through different size screens were investigated. The quality properties of manju dough and preparation of rice manju were also measured. Dry milled flour with soaked rice (DMFSR) were decreased in ash and crude lipid contents compared to dry milled flour with raw rice (DMFRR). Water binding capacity, damaged starch content, and L value of rice flour increased with decreasing particle size, but the b value decreased. Peak, cold, and breakdown viscosities of DMFSR were higher than those of DMFRR by RVA. Hardness of manju dough with DMFSR was lower than that with DMFRR, but that of manju shell exhibited a reverse trend. Sensory difference testing revealed the smoothness of surface, hardness, roughness, and overall quality were significantly different (p<0.05). The smoothness of the surface of manju with DMFRR-200 and all DMFSR were better than that of manju prepared with wheat flour. Hardness showed lower values in DMFRR-200, and all DMFSR as well as wheat flour and roughness decreased with decreasing particle size. Rice manju with wheat flour, DMFRR-200, DMFSR-120, and DMFSR-170 ranked above 5 points and were not significantly different (p<0.05).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.219-225
• /
• 2011

The physicochemical properties of rice endosperm from five rice varieties and effects of milling on baking bread properties of rice flour were investigated. Five rice varieties exhibited different level of amylose content. The ratio of longer amylopectin chain length to the distribution of endosperm starches was the highest in Goami3. According to the RVA measurement of rice flours, the pasting temperatures of Seolgaengbyeo and Goamibyeo were lower than those of the other rice varieties. There were differences in the changes of swelling power of rice flour under increasing temperature. Each rice flour sample for bread-making was processed into two different particle size by using an air-classification mill, and significant differences were observed among cultivars in the average particle size and damaged starch content of rice flours. Rice flour of Seolgaengbyeo with fine particle size showed the highest value in specific volume after baking.

• Korean journal of food and cookery science
• /
• v.14 no.3
• /
• pp.225-231
• /
• 1998

Enzyme-treated glutinous rice flour, which was developed to shorten or skip a steeping process during the preparation of Yukwa, was analyzed for its physicochemical characteristics and compared with glutinous rice flour made by 28-day-steeping method. Total sugar content of the 28-day-steeped flour was the highest among all groups, on the other hand, the reducing sugar content was higher in enzyme-treated glutinous rice flour. The viscosity of enzyme-treated flours was significantly lower than that of the 28-day-steeped and particularly showed the lowest value at 65$^{\circ}C$. The contents of Ca$\^$2+/ and Mg$\^$2+/ in enzyme-treated glutinous rice flours were higher than those of the 28-day-steeped group, however, the content of P$\^$+/ was lower. Free sugar detected in glutinous rice flour prepared from 28-day-steeping method was glucose only, but enzyme-treated flours contained maltose and glucose, and the content of total free sugar was much higher than that of the 28-day-steeped group. In microscopic structure, both 28-day-steeped and enzyme-treated flours showed the particle size decreased and porous surface on some part of the flour granule.