• Journal of Chest Surgery
• /
• v.26 no.12
• /
• pp.969-971
• /
• 1993

The sternal turnover has a limited use in an asymmetrical funnel chest. However we tried `One-half sternal turnover` as a new operative approach for an asymmetrical funnel chest. Through the bilateral submammary skin incision, median sternotomy was made from xiphoid process to midsternum and extended horizontally. The segment of ribs were cut at the angle of depression. The en-bloc resected chest wall segment contained one-half sternum as well as a part of ribs and left half of rectus muscle. After turning over the en-bloc segment, reapproximation with wiring was done. Sternotomy wound was closed in layer after placing of substernal drainage tube. Postoperatively, the chest wall was stable and the recovery course was uneventful except left-sided minimal pneumothorax which was cured spontaneaously. The patient was discharged on postoperative 14th day.

• Transactions of Materials Processing
• /
• v.8 no.6
• /
• pp.612-619
• /
• 1999

Internal and external defects of an inner pulley for automobile air conditioner are investigated in this study. Inner pulley is a part of compressor clutch assembly of automobile air conditioner. In cold forging of inner pulley, the design requirement are to keep the same height of the inner rib and outer one and to make uniform distribution of hardness in the forged product. At the end of the forging of inner pulley, the piping defect as an external defect begins to form at the back center of the billet. The internal crack as an internal defect also occur at the adiabatic shear band which usually has maximum ductile fracture value. It is important to predict when the internal and external defects occur during the deformation process, in order to minimize the amount of discard that is generated. The finite element simulations are applied to analyze the defects. The validity of the computational results are examined by experiments. These computational results are in good agreement with the experimental ones.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.8-14
• /
• 2013

When launch vehicles are manufactured, one of the key points is a design of lightweight structure for reducing costs. Isogrid structure was designed to solve this topic, and many researches were carried out about buckling load because compression load is mainly applied to them. Recently, many studies are also being carried out about FEM model geometry of isogrid structure. The reason is that isogrid structure depends on size of ribs so it is difficult to modify about small changes in rib pattern. In this study, 1/8 model of cylindrical isogrid structure model was developed to analyze buckling behavior. Through parameter study, buckling analysis were performed to analyze buckling load and buckling mode depending on size of ribs.

• Journal of Veterinary Clinics
• /
• v.19 no.4
• /
• pp.443-446
• /
• 2002

A primary metastatic malignant plasma cell tumor was presented in a 7-year-old, female, mixed breed dog. The dog was admitted to Veterinary Teaching Hospital at College of Veterinary Medicine, Seoul National University after suffering from depression, anorexia, and dyspnea. The dog was euthanized due to poor prognosis. At necropsy, numerous, firm and tan round nodules, 1 to 2 cm in diameter were noted in the ribs. The nodules formed chain or were occasionally coalescing, causing osteolysis of the ribs. A large amount of clear fluid was present in the thoracic cavity. The spleen and liver were markedly enlarged and congested. Histologically, the nodular masses were diagnosed as plasma cell tumor which was believed to be originated from the rib. Evidence of metastasis was observed in the spleen, liver, and kidney.

• The Korean Journal of Malacology
• /
• v.31 no.2
• /
• pp.159-163
• /
• 2015

We report a new record of Myurella nebulosa (Sowerby, 1825) collected by SCUBA diving from sandy bottom of subtidal zone in Jeju Island in Korea. The specimen of M. nebulosa is distinguished from its congeners by having slightly plump shell, high spire, distinctive subsutural band, deep axial ribs, numerous and shallow spiral ribs, ivory in color. In this report, we provided a brief morphological description and photographs of M. nebulosa. An unrooted phylogenetic tree for mitochondrial cox1 sequences using NJ analysis found Korean M. nebulosa sample was clustered with its conspecific sequences, but clearly separated from M. columellaris that is not easy to distinguishable based on external shell morphology alone.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.1
• /
• pp.53-61
• /
• 2008

In this research, the layout and geometry of U-type ribs in the part, including significant process conditions, are automatically optimized to reduce part warpage with robustness in consideration. The optimization procedure are based on an iterative redesign methodology integrated with computer aided injection molding simulation, Taguchi's Design of Experiment(DOE), and a direct search-based optimization method. The robustness of a design alternative is efficiently measured by introducing composite noise factor and Taguchi's signal-to-noise ratio. As a solution search methodology, the modified design space reduction method based on orthogonal arrays is employed to exploit an optimal robust design alternative. To illustrate the proposed methodology, a case study is performed on simulation results, where an optimal robust design alternative is obtained with a moderate number of iterations.

• Journal of International Academy of Physical Therapy Research
• /
• v.8 no.2
• /
• pp.1142-1145
• /
• 2017

The purpose of this study was to examine the effect of kinematic taping on respiratory muscle strength in smokers. Twenty - five university students who smoke were involved in the study. All participants were applied to kinematic taping to breathe deeply again. Subjects sit on their backs straight up and place their hands on their thighs. Tape 1 is applied from the lower prominent neck vertebrae(seven cervical vertebra) inward and downward, past shoulder blade, around ribs to the lower tip of sternum. Tape 2 extends to the lower, outer edge of shoulder blade, around ribs to the lower tip of sternum. Respiratory muscle strength was measured with Micro Mouth Pressure Measurement before and after taping. The application of kinematic taping significantly improved the inspiratory and expiratory muscle strength (p<.05). These findings suggest that kinematic taping effective in improving respiratory muscle strength and deep breathing.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.627-630
• /
• 2003

This work presents a numerical procedure to optimize the shape of three-dimensional channel with angled ribs mounted on one of the walls to enhance turbulent heat transfer. The response surface method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of flow and heat transfer. SST turbulence model is used as a turbulence closure. The width-to-height ratio of the rib, rib height-to-channel height ratio, pitch-to-rib height ratio and attack angle of the rib are chosen as design variables. The objective function is defined as a linear combination of heat-transfer and friction-loss related terms with weighting factor. D-optimal experimental design method is used to determine the data points. Optimum shapes of the channel have been obtained for the weighting factors in the range from 0.0 to 1.0.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.139-143
• /
• 2001

In injection molded parts, the ribs require more complicated mold cavities and cores. But it is necessary for the parts to attach the ribs for assembly, moldability and other functional purposes. To design them appropriately considering structural strength and injection molding, the profound knowledge that includes moldability, causal effects on the properties of the part is needed. This paper describes the design methodology which enables easy, simple, time and cost-effective design for the features.

• Steel and Composite Structures
• /
• v.23 no.4
• /
• pp.445-452
• /
• 2017

This study intends to improve the structural details of the anchors in the conventional CFT column-to-foundation connection. To that goal, finite element analysis is conducted with various design variables (number and embedded length of deformed bars, number, aspect ratio, height ratio and thickness ratio of ribs) selected based upon the results of loading test and strength evaluation. The finite element analysis is performed using ABAQUS and the analytical results are validated by comparison with the load-displacement curves obtained through loading test applying axial and transverse loads. The behavioral characteristics of the numerical model according to the selected design variables are verified and the corresponding results are evaluated.