• 폴리머
• /
• 제38권6호
• /
• pp.735-743
• /
• 2014

폴리프로필렌의 분자량 및 분자량 분포를 예측하기 위해 레오메터, 고유점도측정기 및 MI(melt index) 기기 등을 이용하여 유변 물성을 측정하였고, 분자구조해석에는 GPC가 사용되었다. 기존에 사용되어온 동적진동측정을 이용한 교차 모듈러스에서 결정된 유변학적 PI(다분산 지표)와 변형된 Carreau 모델을 이용하여 계산된 분포 폭 매개변수(distribution broadness parameter)를 분자량 분포와의 관계를 비교해보았다. 유변학적 PI의 경우 이론적 근거가 부족하고, 압출에 의해 재 생성된 폴리프로필렌 시료에 대해서는 분자량 분포와 잘 일치하지만 반응기에서 중합된 시료 즉, 분자량 분포가 넓거나 다른 경우 잘 일치하지 않는다는 보고가 지배적인데 비해 분포 폭 매개변수는 폴리프로필렌의 전단담화의 정도를 직접적으로 측정하는 것으로 분자량 분포를 잘 예측할 수 있음을 알았다.

• Applied Biological Chemistry
• /
• 제32권4호
• /
• pp.332-337
• /
• 1989

재수화한 동결건조 즉석미반의 리올로지 성질을 통상법으로 취반한 미반과 비교하면서 조사하였다. 온도$(60{\sim}90^{\circ}C)$를 달리한 복원시간에 따른 미립 경도의 역수(연화도)는 복원온도에 상관없이 1차 반응 속도식에 따라 감소하였고, 경도반응의 속도 상수 값은 온도에 따라 증가하였으며, 이의 활성화 에너지는 6.1 kcal/g-mol이었다. 여러 온도 $(60{\sim}90^{\circ}C)$에서 복원시킨 즉석미반의 압축응력 완화 곡선은 통상법으로 취반한 미반과 마찬가지로 일반화된 Maxwell의 6요소 역학모형으로 설명되었고, 즉석미반은 취반미보다 완화되기 쉬우나 복원온도가 높을수록 탄력성이 높아지는 특성을 나타내었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.719-723
• /
• 2003

Cystan의 분산활성은 점토광물에 대한 침강속도가 완연히 느려짐을 확인하여 분산제로서의 성능이 우수함을 볼 수 있었으며, 넓은 범위의 중성 pH에서는 고르게 분산활성을 유지하는 것으로 밝혀졌다. 이는 rheological test에서도 알 수 있었는데, 여러 pH와 온도에서의 Cystan 용액의 점도측정결과 넓은 영역에서 pH 및 온도 변화에 따른 큰 차이가 없었다. Cystobacter sp. MSL-9에 의해 생산되는 Cystan은 분산활성과 안정성이 높으며 기존 화학분산제보다 환경친화적이어서 그 산업적 가치가 클 것으로 기대된다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.611-614
• /
• 2003

p-KG03의 고유점도는 65.22 및 50.75 $d{\ell}/g$ 이며, 사슬강도성은 0.170이였고, 특성화 농도는 0.114 g/l이었다. p-KG03은 non-Newtonic fluid로 Power-Low Model에 의한 pseudoplastic한 물성을 갖으며, 유체성으로 p-KG03 1%의 constancy index (K)는 2,172 cp, flow behavior index (n)는 0.52이었다. 특히 pH, 염 및 열에 안정하며 기존 다당류와의 혼합이용 가능성이 있을 것으로 생각된다.

• 공업화학
• /
• 제17권4호
• /
• pp.386-390
• /
• 2006

콜로이드형 실리카는 화학적으로 안정한 무기소재로 비표면적과 표면물성이 우수하여 산업적으로 다양한 용도로 사용하고 있다. 본 연구에서는 sodium silicate로부터 이온교환방법 및 산-중화법을 이용하여 colloidal silica를 제조하고 입자성장인자인 온도, pH, 농도와 aging time을 조절하여 크기를 조정하는 방법을 조사하여 균일한 크기분포를 가진 colloidal silica를 제조하였다. 실리카 졸의 크기와 모양은 TEM 및 dynamic scattering method를 이용하여 측정하였다. 또한 콜로이드의 입자크기에 따른 제타 전위값의 변화, 겔화현상과 그 유변학적 특성을 연구하였다.

• Korea-Australia Rheology Journal
• /
• 제16권4호
• /
• pp.175-182
• /
• 2004

Colloidal coating solution was prepared to enhance the hydrophilic property of the film surface. Water and ethanol were used as the dispersion media and (glycidoxypropyl) trimethoxysilane (GPS) as a binder in the colloidal silica coatings. Ethylene diamine was added to the colloidal silica solution as the curing agent. The colloidal silica solution was regarded as a hard-sphere suspension model with low volume fraction of the silica particles. Rheological properties of the silica suspensions modified with GPS have been investigated as a function of pH and concentration. The acidic solution showed high viscosity change by fast hydrolysis reaction and adsorption of the organic binders on the surface of silica particles. However, the hydrolysis was slow at the basic condition and the binders combined with themselves by condensation. The viscosity change was smallest at pH 7. The viscosity increased with the curing time after adding ethylenediamine, and the increase of viscosity at low pH was higher than that at high pH. The hydrophilic properties of the coating film were investigated by the contact angle of water and film surface. The smallest contact angle was shown under the strong acidic condition of pH 2.

• Advances in concrete construction
• /
• 제10권5호
• /
• pp.431-441
• /
• 2020

For the purpose of improving the properties of UHPC as well as the economic efficiency in production of the material, Availability of river sands as fine aggregate instead of micro silica sand were investigated. Four different sizes of river sands were considered. Using river sand instead of micro silica sand increased the flowability, and decreased the yield stress and plastic viscosity in rheological properties, and the effect was higher with larger particle size of river sand. It was demonstrated by analyses based on the packing density. In the results of compressive strength and elastic modulus, even though river sand was not as good as micro silica sand, it could provide high strength of over 170 MPa and elastic modulus greater than 40 GPa. The difference in compressive strength depending on the size of river sand was explained with the concept of maximum paste thickness based on the packing density of aggregate. The flexural performance with river sand also presented relatively lower resistance than micro silica sand, and the reduction was greater with larger particle size of river sand. The flexural performance was proven to be also influenced by the difference in the fiber orientation distribution due to the size of river sand.

• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1229-1234
• /
• 2003

최근 광물 혼합재로서 메타카올린의 이용이 주목되어지고 있다. 본 연구에서는 메타카올린을 혼합한 시멘트 페이스트의 유동특성에 관해 조사하였다. 시멘트 페이스트의 레올로지는 실린더형 스핀들을 갖는 회전형 점도계를 사용하여 평가하였다. 메타카올린을 혼합한 시멘트 페이스트의 유동성은 물/고체비의 증가와 고성능 감수제의 치환량의 증가에 따라 증가하였다. 또한 메타카올린을 일부 치환한 시멘트 페이스트는 dilatant 거동을 나타내었다. Dilatancy는 물/고체비와 메타카올린의 양에 영향을 받았으며, 실리카 퓸의 경우는 thixotropy를 나타내었다.

• Journal of Biosystems Engineering
• /
• 제18권4호
• /
• pp.402-409
• /
• 1993

During all mechanical processes rice plants are subjected to verious forces such as natural load of wind and mechanical load of agricultural machines. A force is always accompanied by deformation, which must be either sufficiently great for pressing or sufficiently slight in order to avoid damage. The mechanical behavior of the rice plants is determined by three variables : force, deformation and time. And they must be studied using rheological methods to determine their viscoelastic properties. This study is conducted to experimentally determine the mechanical and rheological properties of the rice stalks subjected to radial load. The force relaxation tests are performed under constant deformation, during which the reduction of forces over time is measured. The mechanical models were developed from the abtained data. The results were as follows : 1. The relaxation behavior of a rice stalk in radial compession may be described by a generalized Maxwell model consisting of 3 Maxwell elements in parallel. 2. Relaxatiom intensity always decreased with increased time of relaxation. 3. The rate of deformation has a significant effect on the relaxation behavior. having increasing pattern with an increase in rate of deformation. 4. The relaxation intensity and residual deformation increased with increased initial load. 5. The relaxtion of the intermediate portion of stalk was bigger tham that of the upper and lower portions.

• 한국식품조리과학회지
• /
• 제16권4호
• /
• pp.311-315
• /
• 2000

Mulberry leaves Julpyun(a traditional Korean rice cake) was prepared by adding Mulberry leaves powder in the ratio of 0%, 3%, 6% and 9% of rice flour, and tested for inorganic nature, physical function, chromaticity, and rheological properties. As the ratio of mulberry leaves powder increased, both the amounts of major inorganic ingredients, calcium, magnesium, and sodium, and the amounts of minor inorganic ingredients, iron, copper, and zinc, were increased proportionally. Thus, one way to increase the amounts of inorganic ingredients appeared to add mulberry leaves powder. In physical function test, control cake(0% mulberry leaves) showed the highest value in appearance and the value decreased as the amounts of mulberry leaves increased. In color, 3%-mulberry leaves-Julpyun gave the highest value followed by 0%, 6%, and 9%-Julpyun in order. The values of texture and moisture were decreased as the ratio of mulberry leaves powder increased. In rheometer test, 9%-mulberry leaves Julpyun showed the high values in hardness, cohesiveness, and brittleness. Therefore, as the amounts of mulberry leaves powder increased, the amounts of inorganic ingredients increased, but the value of physical function test decreased. 9% mulberry leaves Julpyun has the highest value of rheometer test.