• 구강회복응용과학지
• /
• 제25권1호
• /
• pp.73-82
• /
• 2009

인산칼슘시멘트(calcium phosphate cement)는 우수한 생체친화성 및 골전도성을 가지고 있어 골이식재로 많이 사용되어 왔다. 인산칼슘시멘트의 중요한 물성 중 하나인 흐름성은 유변학적 성질을 측정하여 확인할 수 있지만, 인산칼슘시멘트의 유변학적 성질에 관한 연구는 많이 진행되어 있지 않다. 이 실험의 목적은 인산칼슘시멘트를 hydroxyprophyl methylcellulose (HPMC) 수용액 및 polyacrylic acid (PAA) 수용액과 각각 혼합하여 주사용 인산칼슘시멘트를 만들고, 각각의 용액의 농도(35%와 17.5%의 HPMC, 2%와 1%의 PAA)와 온도($25^{\circ}C$ and $37^{\circ}C$)가 유변학적 성질에 미치는 영향을 연구하기 위한 것이다. 실험에 사용된 인산칼슘시멘트는 dicalcium phosphate dihydrate (DCPD)이며 유변학적 성질은 자동화된 rheometer를 사용하여 측정하였다. 통계분석은 Mann-whitney test를 사용하였다. 높은 농도의 경화액과 혼합된 인산칼슘시멘트는 (35% HPMC와 2% PAA)는 낮은 농도의 경화액과 혼합된 인산칼슘시멘트 (17.5% HPMC와 1% PAA)보다 각각 유의성 있게 높은 점도를 보였다. HPMC 수용액과 혼합된 인산칼슘시멘트는 $37^{\circ}C$에서 $25^{\circ}C$보다 유의성 있게 높은 점도를 보였다. PAA 수용액과 혼합된 인산칼슘시멘트는 $37^{\circ}C$에서 $25^{\circ}C$보다 낮은 점도를 보였으나 통계적 유의성은 없었다. 또한 실험에 사용된 모든 종류의 인산칼슘시멘트는 의사가소성(pseudoplastic)을 보였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.360-360
• /
• 2006

Zein protein is one of the best biopolymer for edible film making and polyols are convenient plasticizers for biopolymers. Sorbitol, glycerol and manitol at three levels (0.5, 0.7, 1g/g of zein) were used as plasticizers. Rheological and thermal properties of zein resins were studied for determining their plasticization effectiveness. Sorbitol and glycerol had good plasticizing effects and could decrease viscoelastic modulus of zein resins considerably, but manitol was not as effective as them. Effects of plasticizers on thermal properties of resins were investigated by DSC at -100 to $150^{\circ}C$. No crystallization and melting peaks related to zein resin and plasticizers were observed. Thermograms showed that polyolic plasticizers and zein resin remained a homogeneous material throughout the cooling and heating cycles.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.145-150
• /
• 2004

Blends of poly(phenylene sulfide) (PPS) and polyethylene, either linear low density polyethylene (LLDPE) or metallocene-catalyzed polyethylene (MPE), that were prepared by melt blending, were investigated. From the rheological properties as determined by capillary rheometry, the melt viscosity of both PPS/LLDPE and PPS/MPE blends was low when PE was in dispersed phase, but high melt viscosity was observed for both blends with PPS in dispersed phase. Significant differences depending on the composition were found in the mechanical properties such as percent elongation at break and notched Izod impact strength. In addition, dispersed phase morphology of the blends was analyzed by a scanning electron microscope (SEM), together with brief discussion about the difference between them.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.43-46
• /
• 2004

Multi-walled carbon nanotubes (MWNTs) produced by chemical vapor deposition were treated with acidic solution for purification and oxidization of CNTs. The surface modification of the oxidized CNTs was achieved by amine treatment and oxygen plasma treatment. The functionalized CNTs were embedded in the epoxy resin by sonication method and the resulting composite was investigated by FESEM. Rheological and mechanical properties of nanocomposites were measured by AR2000 and Instron. The rheological properties and dispersion of modified CNTs/epoxy composites were improved as CNTs were modified, because the modification of CNTs led to a improvement interaction between the CNTs and the epoxy resin. In addition to this, mechanical properties are also improved because of the effective stress transfer between the CNTs and the polymer.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1487-1491
• /
• 2008

Detailed knowledge on the motion of blood cells flowing in micro-channels under simple shear flow and the influence of blood flow is essential to provide a better understanding on the blood rheological properties and blood cell aggregation. The microscopic behavior of red blood cell (RBCs) is numerically investigated using a fluid-structure interaction (FSI) method based on the Arbitrary-Lagrangian-Eulerian (ALE) approach and the dynamic mesh method (smoothing and remeshing) in FLUENT (ANSYS Inc., USA). The employed FSI method could be applied to the motions and deformations of a single blood cell and multiple blood cells, and the primary thrombogenesis caused by platelet aggregation. It is expected that, combined with a sophisticated large-scale computational technique, the simulation method will be useful for understanding the overall properties of blood flow from blood cellular level (microscopic) to the resulting rheological properties of blood as a mass (macroscopic).

• 한국염색가공학회지
• /
• 제12권5호
• /
• pp.295-300
• /
• 2000

The melting behavior of hydrated polyacrylonitrile (PAN) and the rheological properties of hydrated PAN melt were investigated using DSC md modified capillary rheometer. With increasing the water content, Tm of the hydrated PAN was rapidly decreased and finally levelled off above a critical water content. However, the melt viscosity was further decreased even above the critical water content. The hydrated PAN melt showed a typical shear thinning behavior. In arrhenius plot, when the hydrated PAN melt was supercooled, it exhibited a different dependency on temperature from that above melting temperature.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2006년도 춘계 학술발표회 논문집
• /
• pp.61-64
• /
• 2006

Soft materials, such as polymer solutions, gels and filamentous protein materials in cells, show complicated behavior due to their complex structures and dynamics with multiple characteristic time and length scales. Several complementary techniques have been developed to measure viscoelastic of soft materials. Especially, particle tracking microrheology, using the Brownian motion of particles in a medium to get rheological properties, has recently been improved both theoretically and experimentally. Compared to other conventional methods, video particle tracking microrheology has some advantages such as small sample volume, detecting spatial variation of local rheological properties, and less damage to sample materials. With these advantages, microrheology is more suitable to measure the properties of complex materials than other mechanical rheometries.

• 폴리머
• /
• 제35권5호
• /
• pp.451-457
• /
• 2011

라텍스 기법으로 제조한 폴리스티렌(PS)/다중벽 탄소나노튜브(MWCNT) 나노복합재료의 라텍스 입자 크기에 따른 유변학적, 전기적 물성을 고찰하였다. 나노복합재료는 무유화제 유화중합과 분산중합으로 합성한 단분산 PS 입자에 MWCNT를 초음파 분산시킨 다음 동결건조 과정을 거쳐 제조하였다. PS/MWCNT 나노복합재료는 MWCNT 함량이 증가할수록 점차 네트워크 구조를 형성하여 저장 탄성률, 복소 점도 및 전기 전도도가 급격하게 증가하였다. MWCNT 함량에 따른 저장 탄성률 및 복소 점도 증가 효과는 라텍스 입자 크기가 큰 경우 더욱 뚜렷하였다. 입자 크기에 따른 전기적 물성은 MWCNT 함량에 따라 상이한 경향을 보여 주었는데, 함량이 적은 경우 작은 입자로 제조한 나노복합재료가 높은 전기 전도도를 보여 주었으나 함량이 증가할수록 큰 입자의 경우가 높은 값을 보여 주었다.

• 한국축산식품학회지
• /
• 제28권4호
• /
• pp.463-469
• /
• 2008

The objective of the present study was to compare the chemical, rheological and sensory properties of regular process cheese (control) and cholesterol-reduced block-type process cheese. The cholesterol-reduced process cheese was made by accelerated ripened cholesterol-reduced Cheddar cheese and cholesterol-reduced butter treated by crosslinked $\beta$-cyclodextrin ($\beta$-CD). The composition of the block-type process cheese was similar to the control cheese. Approximately 91.0% of cholesterol removal was observed when treated by crosslinked $\beta$-CD. The production of total free amino acids was significantly higher in cholesterol-reduced process cheese in all storage periods compared with those in the control. In sensory analysis, a significantly higher score of acidic, salty and bitterness. and lower score of elasticity were found. However, no difference was found in free fatty acids, rheological properties, and TBA test between the control and cholesterol-reduced process cheese. Therefore, the present study indicated that even though some of the significant difference was observed in sensory properties in the cholesterol-reduced block-type process cheese, most of chemical and rheological properties were comparable to the control process cheese.

• 한국식품과학회지
• /
• 제12권1호
• /
• pp.66-73
• /
• 1980