• Journal of the Korean Chemical Society
• /
• v.46 no.3
• /
• pp.233-240
• /
• 2002

In this work, the cure kinetics and rheological and mechanical properties of diglycidylether of bispheonol A (DGEBA, EP)/polyurethane (PU) blends were investigated. The 1 wt% N-benzylpyrazinium hexafluoroantiminate (BPH) was used as a latent thermal catalyst. Latent properties were performed by measurement of the conversion as a function of reaction temperature using DSC. And the rheological properties of the blend systems were investigated under isothermal conditions using a rheometer. Crosslinking activating energies (Ec) were also determined from the Arrhenius equation based on gel time and curing temperature. The impact strengths were measured as mechanical properties of the casting specimens. The BPH in the blend systems could be an excellent latent thermal catalyst without any co-initiator. The rheological results showed that Ec was highest when PU content was 30 wt% which was in good agreement with the impact strengths. This was probably due to the intermolecular hydrogen bonding between the hydroxyl group in PU and EP, resulting in increasing the crosslinking density.

• The Korean Journal of Rheology
• /
• v.10 no.4
• /
• pp.227-233
• /
• 1998

The effects of 1 mol% N-benzylpyrazinium hexafluoroantimonate(BPH) as a thermal latent initiator and blend compositions composed of cycloaliphatic and DGEBA epoxies were investigated in the rheological properties and cure kinetics. Latent properties were performed by measurement of the conversion as a function of reaction time using isothermal DSC at $150^{\circ}C$ and $50^{\circ}C$ Rheological properties of the blend systems were investigated in terms of isothermal experiments using a rheometer. The gelation time was obtained from the evaluation of storage modulus (G'), loss modulus (G") and damping factor (tan$\delta$)). Cross-linking activation energy ($E_c$) was also determined from the Arrhenius equation based on gel time and curing temperature. As a result, the gel time and cross-linking activation energy increased with increasing DGEBA composition. The cure activation energies ($E_a$) were obtained by Kissinger method using dynamic DSC thermograms. In this work, the cure activation energy decreased with increasing CAE concentration, which might be resulted from the short repeat units, simple side-groups and viscosity of reaction media.edia.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.2
• /
• pp.139-146
• /
• 2013

Surimi products are among the most prominent seafoods in Korea. Together with fish meat, wheat flour is a major ingredient in the preparation of surimi products. Rice flour, however, can be an effective ingredient in enhancing the rheological characteristics of surimi products. In this study, we evaluated the potential of rice flour as an agent to replace wheat flour in surimi products. The effects of rice flour milling types and addition methods on the rheological and sensory properties of surimi products were investigated. Among different addition methods, the surimi product containing non-treated rice flour showed better gel strength and sensory properties than products containing paste (1:1.3 rice flour/water, w/v) and steamed paste (steamed at $100^{\circ}C$ for 30 min). According to the gel strength results for surimi products with added roll-mill (40 mesh) and jet-mill (180 mesh) rice flours, the roll-mill rice flour shows good potential as a replacement for wheat flour. When considering gel strength and sensory properties, an effective amount of rice flour to add was 10-15% (w/w). In conclusion, the rheological and sensory properties of surimi products containing rice flour were comparable with those of a premium commercial surimi product. Therefore, rice flour might be an effective alternative to wheat flour for premium surimi products.

• Preventive Nutrition and Food Science
• /
• v.14 no.3
• /
• pp.233-239
• /
• 2009

The effects of guar gum (GG) and xanthan gum (XG) at different concentrations (0, 0.2, 0.4, and 0.6% w/w) on the rheological properties of Korean waxy rice starch (WRS) pastes were evaluated under both steady and dynamic shear conditions. The flow properties of WRS-gum mixtures were determined from the rheological parameters of the power law model. The addition of GG and XG to WRS resulted in an increase in the apparent viscosity ($\eta_{a,100}$) and consistency index (K) values obtained from power law model. The flow behavior index (n) values of the WRS-XG mixtures decreased with an increase in gum concentration while there was only a marginal difference between n values for the WRS-GG mixtures. Dynamic moduli (G', G", and $\eta^*$) values in the WRS-gum mixture systems also increased with an increase in gum concentration. WRS-XG mixtures had higher dynamic moduli and lower tan $\delta$ (ratio of G"/G') values than WRS-GG mixtures, indicating that the higher dynamic rheological properties of WRS-XG can be attributed to an increase in the viscoelasticity of the continuous phase in the starch-gum mixture systems, which was due to the higher viscoleastic properties of XG compared to GG. The dynamic ($\eta^*$) and steady shear ($\eta_a$) viscosities of the WRS-XG paste at a 0.2% gum concentration followed the Cox-Merz superposition rule.

• Korea-Australia Rheology Journal
• /
• v.18 no.4
• /
• pp.183-189
• /
• 2006

High internal phase emulsions are highly concentrated emulsion systems consisting of a large volume of dispersed phase above 0.74. The rheological properties of high internal phase water-in-oil emulsions were measured conducting steady shear, oscillatory shear and creep/recovery experiments. It was found that the yield stress is inversely proportional to the drop size with the exponent of values between 1 and 2. Since the oil phase contains monomeric species, microcellular foams can easily be prepared from high internal phase emulsions. In this study, the microcellular foams combining a couple of thickeners into the conventional formulation of styrene and water system were investigated to understand the effect of viscosity ratio on cell size. Cell size variation on thickener concentration could be explained by a dimensional analysis between the capillary number and the viscosity ratio. Compression properties of foam are important end use properties in many practical applications. Crush strength and Young's modulus of microcellular foams polymerized from high internal phase emulsions were measured and compared from compression tests. Of the foams tested in this study, the foam prepared from the organoclay having reactive group as an oil phase thickener showed outstanding compression properties.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.173-180
• /
• 1995

LLDPE/LDPE 혼합물의 유변 물성과 필름가공특성 필름 물성 및 LLDPE의 extrudate 표면상태를 살펴보았다. LLDPE에 LDPE를 혼합함으로써 용융 강도가 크게 향상 되는 것을 볼수 있었으며 혼합비에 따라 필름의 기계적 물성이 변화하는 것을 볼수 있었다. 즉 최고의 물성을 나타내는 적절한 혼합비율이 존재하였다. 본논문에 사용된 LLDPE/LDPE 혼합물에 있어서는 LDPE의 함량이 15∼30wt%일 때 가장 우수한 기계적 물성을 얻을수 있 었다. LLDPE 필름의 표면 불량 문제를 보기위하여 capillary를 이용하여 LLDPE extrudate 의 표면 튀틀림(distortion)의 진행순서를 살펴본 결과, 전단 응력이 0.23MPa 일때 sharkskin이 발현함을 볼수 있었다.

• The Korean Journal of Food And Nutrition
• /
• v.4 no.2
• /
• pp.199-206
• /
• 1991

Rheological properties of $\alpha$-rice powder were investigated in comparison with those of polished rice powder. Flow behavior for cooked solutions of two powdered samples(5~11%) were Binghampseudo plastic. Consistency index and yield stress of cooked solution of powdered a-rice were much lower than those of polished rice powder while flow behavior index was nearly similar. 9% cooked solution of powdered $\alpha$ -rice showed slightly weaker thixotrophic behavior and more ease tendency to relax under the steady shear than those of polished rice powder.

• KSTLE International Journal
• /
• v.4 no.1
• /
• pp.14-17
• /
• 2003

The electrical and rheological properties of a chitosan malonate suspension in silicone oil was investigated by varying the electric fields, volume fractions of particles, and shear rates, respectively, The chitosan malonate susepnsion showed a typical electrorheological (ER) response caused by the polarizability of an amide polar group and shear yield stress due to the formation of multiple chains upon application of an electric field. The shear stress fur the suspension exhibited a linear dependence on the volume fraction and an electric field power of 1.88. On the basis of the experimental results, the newly synthesized chitosan malonate suspension was found to be an anhydrous ER fluid.

• Korea-Australia Rheology Journal
• /
• v.15 no.1
• /
• pp.43-50
• /
• 2003

In this study, two types of biodegradable resins-based clay nanocomposites, in which organic montmorillonite clay was filled, were prepared by the direct melt blending method. In order to characterize the nanocomposite structure, wide-angle X-ray diffraction (WAXD) and TEM observation were performed. Characterization of the nanocomposites shows that intercalated and partially exfoliated structures were generated by the melt blending method. Mechanical and rheological properties of the nanocomposites were measured respectively. For the mechanical properties, there were improvements in tensile strength and Young's modulus of the nanocomposites due to the reinforcement of nanoparticles. The rheological behaviors of the nanocomposites were significantly affected by the degree of the dispersion of the organoclay. The storage modulus of the nanocomposites was measured and the degree of the dispersion of the organoclay was evaluated from the value of the terminal slope of the storage modulus. In addition, the quantity of the shear necessary for making the nanocomposite for melt intercalation method was estimated from the relationship between the value of the terminal slope of the storage modulus and the applied shear.

• Food Science and Biotechnology
• /
• v.16 no.3
• /
• pp.496-499
• /
• 2007

Dynamic rheological properties of hot pepper-soybean paste (HPSP) samples mixed with guar gum and xanthan gum were evaluated at different storage temperatures (5, 15, and $25^{\circ}C$) by using a dynamic rheometer. Magnitudes of storage modulus (G'), loss modulus (G"), and complex viscosity (${\eta}^*$) in the HPSP-gum mixtures increased with an increase in storage temperature from 5 to $25^{\circ}C$. After 3-month storage at 5 and $15^{\circ}C$ there were no significant changes in dynamic rheological properties. The increase in dynamic moduli (G', G", and ${\eta}^*$) with storage temperature is less pronounced at HPSP-xanthan gum mixtures in comparison to HPSP-guar gum mixtures. The slopes of G' (0.16-0.18) of HPSP-guar gum mixtures at 3-month storage were much higher than that (0.10) at 0-month storage, indicating that the elastic properties of the HPSP-guar gum mixtures can be decreased after 3-month storage. However, there were not much differences between the slopes of G' in HPSP-xathan gum mixtures. Xanthan gum was observed to be better structure stabilizer for HPSP during storage.