• 펄프종이기술
• /
• 제46권2호
• /
• pp.46-56
• /
• 2014

The aim of this reviews is to introduce the information concerning design of the UV-curable jet ink composition in order to provide a good adhesive property on non-porous surface. In order to clarify the viscosity dependence of flying speed for the UV curable jet ink, rheological analysis and observation of the flying state of the ink were carried out. The relationship between ink formulas and adhesive property on non-porous surface was investigated. It was examined the adhesive property of radical polymerization type UV curable jet ink included hydrogen abstraction type photo-initiator, it was expected that the strong adhesive strength can be obtained between the ink and non-porous surface in this study. UV curable jet ink with a slight amount of water was prepared. Optimum ratio of the cationic polymerization type UV curable jet ink shows an adequate adhesive strength towards two kinds of non-porous surface such as glass, poly(vinyl chloride) when tests were conducted on the ink jet-printing test machine.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1159-1165
• /
• 2011

This paper presents ride comfort characteristics of a quarter-vehicle magneto-rheological(MR) suspension system with respect to different tire pressure. As a first step, controllable MR damper is designed and modeled based on both the optimized damping force levels and mechanical dimensions required for a commercial full-size passenger vehicle. Then, a quarter-vehicle suspension system consisting of sprung mass, spring, tire and the MR damper is constructed. After deriving the equations of the motion for the proposed quarter-vehicle MR suspension system, vertical tire stiffness with respect to different tire pressure is experimentally identified. The skyhook controller is then implemented for the realization of the quarter-vehicle MR suspension system. Finally, the ride comfort analysis with respect to different tire pressure is undertaken in time domain. In addition, a comparative result between controlled and uncontrolled is provided by presenting vertical RMS displacement.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.79-86
• /
• 2012

The aim of this general remarks is to introduce the results concerning the thermo physical, charging, developing and fusing characteristics of micro-encapsulated (MC) model toners in order to apply to the toner of electrophotographic system at the condition of a low temperature. In order to clarify the fusing mechanism of MC toner, rheological analysis of the toner was chosen. It was suggested that MC toner had a different fusing mechanism compared with non-MC toner. Some kinds of MC model toners showed a good result on adhesion test as well as cohesion test. Also, it was possible to get the good charging and development characteristic of MC toner for printing test with laser printer.

• 동아시아식생활학회지
• /
• 제13권6호
• /
• pp.593-600
• /
• 2003

This study was carried out in order to investigate the possibility of frozen rice batter for the manufacturing of Jeung-pyun. Despite of its unique taste and texture, Jeung-pyun is not consumed much because it needs long time to make. The physicochemical, sensory, rheological and surface characteristics of Jeung-pyun were analyzed to develop the easy manufacture method. The storage condition of rice batter was used at -2$0^{\circ}C$ up to 4 weeks. Statistical data analysis was completed using a SAS program. The results are summarized as follow: The pH brix% and sugar content of all samples which added low-temperature tolerance raw yeast or regular raw yeast decreased during the fermentation. Kind of yeast did not influence on the moisture content of the Jeung-pyun batter. Specific volume and carbon dioxide evolution of Jeung-pyun batter were highest when the rice batter was frozen for 1 week regardless of the kind of yeast. Overall quality of frozen batter of Jeung-pyim at -2$0^{\circ}C$ for 4 weeks had the highest score among different samples. As the test results of mechanical characteristics, cohesiveness, gumminess, brittleness, hardness and springiness did not show any significant differences statistically. The result clearly suggests that freezing the rice batter is a possibile way to manufacture Jeung-pyun.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.685-699
• /
• 2017

In order to determine the rate of penetrability, water pressure test is used before the grouting. One of the parameters which have the highest effect is pressure. Mathematical modeling is used for the first time in this study to determine the optimum pressure. Thus, the joints that exist in the rock mass are simulated using cylindrical shell model. The joint surroundings are also modeled through Pasternak environment. In order to validate the modeling, pressure values obtained by the model were used in the sites of Seymareh and Aghbolagh dams and the relative error rates were measured considering the differences between calculated and actual pressures recorded in these operations. In water pressure test, in Seymareh dam, the error values were equal to 4.75, 3.93, 4.8 percent and in the Aghbolagh dam, were 22.43, 5.22, 2.6 percent and in grouting operation in Seymareh dam were equal to 9.09, 32.50, 21.98, 5.57, 29.61 percent and in the Aghbolagh dam were 2.96, 5.40, 4.32 percent. Due to differences in rheological properties of water and grout and based on the overall results, modeling in water pressure test is more accurate than grouting and this error in water pressure test is 7.28 percent and in grouting is 13.92 percent.

• 한국조리학회지
• /
• 제12권2호
• /
• pp.206-221
• /
• 2006

To establish an optimum formula for processing wet noodles with steam-dried Hizikia fusiformis flour(SHF), it was incorporated into wheat flour by the ratio of 0, 1, 3, 5, 10 and 20% based on a flour weight. Application of 2% mehthylcelluose(MC) to improve the texture of noodles mixed with SHF was also attempted. Evaluation was performed on the dough rheology and wet noodle quality, such as cooking characteristics, mechanical texture properties, sensory value and shelf-life. Water absorption rate of the composite flour increased linearly as the content of SHF increased from 1% to 10%, and noodle sheet-formation was also acceptable in the same content level. The weight and volume of cooked noodles were decreased, and turbidity of soup was, if exceeding more than 5% of SHF, increased constantly. However, these problems could be remarkably resolved in SHF plus 2% MC. Texture profile analysis of cooked noodles showed an increase of hardness, gumminess, and chewiness up to 5% SHF. The results of sensory evaluation showed that cooked noodles containing 5% SDF were acceptable as much as wheat four noodles in terms of color, texture, taste and flavor. Based on cooking properties, rheological and sensory evaluation, addition of 5% SHF plus 2% MC was suggested to be suitable for making wet noodles, of which the shelf-life was estimated to be 8 days at $5^{\circ}C$.

• Design & Manufacturing
• /
• 제2권6호
• /
• pp.23-27
• /
• 2008

It is well known that the family-mold has an advantage to reduce the cost for production and mold. However, defects are frequently occurred by over packing the smaller volume cavity during molding, especially when the family-mold has a volumetric difference between two cavities. In this study, the cavity-filling imbalance was confirmed by the temperature and the pressure sensors, and a variable-runner system was developed for balancing the cavity-filling. Experiments of balancing the cavity filling was carried out in the family-mold with the variable-runner system, and balancing the cavity-filling was confirmed by changing the cross-sectional area of a runner in the variable-runner system with the temperature and pressure sensors. The influence of the injection speed to the balancing-capability of the variable-runner system was also examined in the experiment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.237-242
• /
• 2008

This paper presents vibration control of an active hybrid engine mount featuring magneto-rheological (MR) fluid and a piezostack actuator. On the basis of the conventional passive rubber mount, MR fluid is adopted to improve isolation performance at resonant frequencies, whereas the piezostack actuator is adopted for performance improvement at non-resonant frequencies, especially at high frequencies. Based on some particular practical requirements of engine mounts, the proposed mount is designed and manufactured. The characteristics of rubber element, piezostack actuator and MR fluid are verified for system analysis and controller synthesis. The model of the proposed mount with a supported mass (engine) is established. In this work, a sliding mode controller is synthesized for the mount system to reduce vibrations transmitted from the engine in a wide frequency range. Computer simulations are performed to evaluate the performances of the proposed active engine mount in time and frequency domains.

• Tribology and Lubricants
• /
• 제15권3호
• /
• pp.240-247
• /
• 1999

The electrorheological (ER) behavior of suspensions in silicone oil of phosphoric ester cellulose particles (average particle size : 18$\pm$1${\mu}{\textrm}{m}$) coated with octadecylamine ( $C_{18}$ $H_{37}$ N $H_2$) as surfactant was investigated at room temperature. For development of anhydrous ER suspension using at real application, it should be researched how can reduce deposition of ER particles in ER suspension. Anhydrous ER suspensions mixing with phosphoric ester cellulose particles coated with octadecylamine were measured. As increasing the coating concentration of octadecylamine, not only analysis of electrical properties such as dielectric constant, current density and electrical conductivity but also rheological properties of ER suspensions were studied. From the experimental results, coating concentration of surfactant had large influence to ER properties of anhydrous ER suspension. Current density, conductivity and electrorheological effect ($\tau$/$\tau$$_{0}$) of ER suspension were linearly reduced with increasing the coating concentration of octadecylamine. But ER suspensions dispersed the phosphoric ester cellulose particles coated with octadecylamine showed reducing deposition of ER particles and could be redispersed easily.

• Korea-Australia Rheology Journal
• /
• 제16권1호
• /
• pp.47-54
• /
• 2004

Low Reynolds number, dilute, and surfactant-free bubble suspensions are prepared by mechanical mixing after introducing carbon dioxide bubbles into a Newtonian liquid, polyol. The apparent shear viscosity is measured with a wide-gap parallel plate rheometer by imposing a simple shear flow of capillary numbers(Ca) of the order of $10^{-2}$ ~ $10^{-1}$ and for various gas volume fractions ($\phi$). Effects of capillary numbers and gas volume fractions on the viscosity of polyol foam are investigated. At high capillary number, viscosity of the suspension increases as the gas volume fraction increases, while at low capillary number, the viscosity decreases as the gas volume fraction increases. An empirical constitutive equation that is similar to the Frankel and Acrivos equation is proposed by fitting experimental data. A numerical simulation for deformation of a single bubble suspended in a Newtonian fluid is conducted by using a newly developed two-dimensional numerical code using a finite volume method (FVM). Although the bubble is treated by a circular cylinder in the two dimensional analysis, numerical results are in good agreement with experimental results.