• 한국재료학회지
• /
• 제34권2호
• /
• pp.105-110
• /
• 2024

Scanning probe microscopy (SPM) has become an indispensable tool in efforts to develop the next generation of nanoelectronic devices, given its achievable nanometer spatial resolution and highly versatile ability to measure a variety of properties. Recently a new scanning probe microscope was developed to overcome the tip degradation problem of the classic SPM. The main advantage of this new method, called Reverse tip sample (RTS) SPM, is that a single tip can be replaced by a chip containing hundreds to thousands of tips. Generally for use in RTS SPM, pyramid-shaped diamond tips are made by molding on a silicon substrate. Combining RTS SPM with Scanning spreading resistance microscopy (SSRM) using the diamond tip offers the potential to perform 3D profiling of semiconductor materials. However, damage frequently occurs to the completed tips because of the complex manufacturing process. In this work, we design, fabricate, and evaluate an RTS tip chip prototype to simplify the complex manufacturing process, prevent tip damage, and shorten manufacturing time.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.553-570
• /
• 2016

A series of three-dimensional (3D) parametric finite element analyses have been performed to study the influence of the relative locations of pile tips with regards to the tunnel position on the behaviour of single piles and pile groups to adjacent tunnelling in weathered soil. When the pile tips are inside the influence zone, which considers the relative pile tip location with respect to the tunnel position, tunnelling-induced pile head settlements are larger than those computed from the Greenfield condition. However, when the pile tips are outside the influence zone, a reverse trend is obtained. When the pile tips are inside the influence zone, the tunnelling-induced tensile pile forces mobilised, but when the pile tips are outside the influence zone, compressive pile forces are induced because of tunnelling, depending on the shear stress transfer mechanism at the pile-soil interface. For piles connected to a cap, tensile and compressive forces are mobilised at the top of the centre and side piles, respectively. It has been shown that the increases in the tunnelling-induced pile head settlements have resulted in reductions of the apparent factor of safety up to approximately 43% when the pile tips are inside the influence zone, therefore severely affecting the serviceability of the piles. The pile behaviour, when considering the location of the pile tips with regards to the tunnel, has been analysed in great detail by taking the tunnelling-induced pile head settlements, axial pile forces, apparent factor of safety of the piles and shear transfer mechanism into account.

• 멤브레인
• /
• 제31권1호
• /
• pp.67-79
• /
• 2021

급냉법에 의한 역 열유도상전이(RTIPS) 공정을 사용하여 mesoporous polystyrene (PS), polyethersulfone (PES) 막을 제조하였다. 급냉법에 의한 RTIPS 공정은 급냉 및 승온 시 도포 용액 내 용매 분자들의 결정 생성 및 성장을 통해 나노 규모의 상전이를 야기시켜 mesoporous 기공들을 형성된다. 시차주사열량계(TA: DSC) 사용해 측정된 사용 용매 dimethylformamide (DMF)와 여러 고분자 함량의 고분자용액들에 대한 엔탈피 변화와 주사현미경(SEM)을 사용하여 측정한 고분자함량에 따른 제조된 막 구조, 그리고 비표면적 분석기(BET) 사용하여 측정한 고분자 함량에 따라 제조된 막의 기공크기분포 및 표준편차 분석을 통해 RTIPS 공정 시 상전이 거동을 살펴보았다

• 한국작물학회지
• /
• 제59권4호
• /
• pp.498-504
• /
• 2014

Potato virus Y (PVY) and potato leafroll virus (PLRV) are among the most damaging potato viruses and prevalent in most potato growing areas. In this study, cryopreservation was used to eradicate PVY and PLRV using two cryogenic methods. Potato shoot tips proliferated in vitro were cryopreserved through droplet-vitrification and encapsulation-vitrification using plant vitrification solution 2 (PVS2; 30% glycerol + 15% dimethyl sulfoxide + 15.0% ethylene glycol + 13.7% sucrose) and modified PVS2. Both cryogenic procedures produced similar rates of survival and regrowth, which were lower than those from shoot tip culture alone. The health status of plantlets regenerated from shoot tip culture alone and cryopreservation was checked by reverse transcription-polymerase chain reaction. The frequency of virus-free plants regenerated directly from highly proliferating shoot tips reached 42.3% and 48.6% for PVY and PLRV, respectively. In comparison, the frequency of PVY and PLRV eradication after cryopreservation was 91.3~99.7% following shoot-tip culture. The highest cryopreserved shoot tip regeneration rate was observed when shoot tips were 1.0~1.5 mm in length, but virus eradication rates were very similar (96.4~99.7%), regardless of shoot tip size. This efficient cryotherapy protocol developed to eliminate viruses can also be used to prepare potato material for safe long-term preservation and the production of virus-free plants.

• Journal of Information Display
• /
• 제12권4호
• /
• pp.213-217
• /
• 2011

Printing technologies were applied to fabricate a flexible organic thin-film transistor (OTFT) backplane for electrophoretic displays (EPDs). Various printing processes were adopted to maximize the figures of each layer of OTFT: screen printing combined with reverse offset printing for the gate electrodes and scan bus lines with Ag ink, inkjet for the source/drain electrodes with glycerol-doped Poly (3,4-ethylenedioxythiophene): Poly (styrenesulfonate) (PEDOT:PSS), inkjet for the semiconductor layer with Triisopropylsilylethynyl (TIPS)-pentacene, and screen printing for the pixel electrodes with Ag paste. A mobility of $0.44cm^2/V$ s was obtained, with an average standard deviation of 20%, from the 36 OTFTs taken from different backplane locations, which indicates high uniformity. An EPD laminated on an OTFT backplane with $190{\times}152$ pixels on an 8-in panel was successfully operated by displaying some patterns.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.74.2-74
• /
• 2003

Arabidopsis infected with beet curly top virus (BCTV) has the systemic symptoms like stunting of Plant growth, curling of leaves and shoot tips, and callus induction. The regulation of sucrose metabolism by BCTV infection is essential for obtaining the energy source in the process of virus replication and symptom development. Sucrose metabolism-associated gene expression and biochemical enzyme activity were analyzed with the rossette leaves and inflorescencestems of BCTV infected Arabidopsis by the time course of 1, 7, 14, 21 day postinoculation. The expression of invertase and sucrose synthase genes ( encoding sucrose-cleaving enzymes )was increased and reversely the level of Atkin10a ( sucrose non-fermenting gene ) was decreased, resulting by semi-quantitative reverse transcription polymerase chain reaction. The biochemical analysis of invertase and sucrose synthase activity was performed. The activity of neutral invertase in the inflorescence stems was elevated remarkably. The photosynthetic response in the source of sucrose metabolism was consistent with the down-regulation of ribulose 1,5 bisphosphate carboxylase gene, and lower activity than mock-inoculated plants. The levels of genes pertaining to the cell cycle, hormone, and biotic stress-related pathway showed an increase or a decrease dependent on viral symptoms. Therefore, sucrose sensing by BCTV infection can regulate the expression of sucrose metabolism-related key enzymes such as invertase and Atkin10a, and these gene products might influence to symptom development.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.848-853
• /
• 2005

3D geometric modeling of an object of interest has been intensively investigated in many fields including CAD/CAM and computer graphics. Traditionally, CAD and geometric modeling tools are widely used to create geometric models that have nearly the same shape of 3D real objects or satisfy designers intent. Recently, with the help of the reverse engineering (RE) technology, we can easily acquire 3D point data from the objects and create 3D geometric models that perfectly fit the scanned data more easily and fast. In this paper, we present 3D geometric model generation based on a stereo vision system (SVS) using random pattern projection. A triangular mesh is considered as the resulting geometric model. In order to obtain reasonable results with the SVS-based geometric model generation, we deal with many steps including camera calibration, stereo matching, scanning from multiple views, noise handling, registration, and triangular mesh generation. To acquire reliable stere matching, we project random patterns onto the object. With experiments using various random patterns, we propose several tips helpful for the quality of the results. Some examples are given to show their usefulness.

• 한국초지조사료학회지
• /
• 제15권4호
• /
• pp.259-264
• /
• 1995

Several benefits provided by white clover (Tnifoliurn repens L.) can be elevated as relationship between its morphological and physiological characteristics is clarified. The experiment was done to analyze the relationship between them in the clover with different leaf size. Individual plants of Osceola (large leaf), Grasslands Huia (medium leaf) and Aberystwyth S184 (small leaf) were grown in 15m plastic pot containing a 1:2:1 soil:sand:Promix mixture for 55 days, and then clipped to remove all fully expanded leaves every 7, 14 or 28 days. To measure the cultivar response, plants were sampled for morphological and physiological parameters on the date (0) after final harvest and 1, 3, 7, 14 and 28 days after the final harvest and then their relationship was analyzed. Osceola had greater leaf area per trifoliolate but less no. of leaves per plant to result in similar total leaf area per plant of all cltivars. Stolon length and no. of growing tips per plant declined with smaller leaf size although the result in biomass was reverse. Stolon of all cultivars showed the greatest fluctuation in total nonstructud carbohydrate during the regrowing period but nitrogen concentrations of all their fractions and dinitrogen fixation did similar patterns. Stolon and root of Osceola, moreover, were the highest ones. Biomass, stolon length and total leaf area per plant of all cultivars were positively correlated to carbohydrate concentration of all frauions and dinitrogen fixation. In Osceola relationship between nitrogen concentration of stolon and the characters showed in Osceola was positively done.

• 한국분무공학회지
• /
• 제3권2호
• /
• pp.42-50
• /
• 1998

The effect of swirl flows un the fuel spray characteristics were investigated for various swillers in a model combustor. The interaction between the flow field and fuel spray in the main combustion tone made by frontal devices including fuel injection nozzles and swirlers. which were characterized by flow velocities, fuel droplet sizes and their distributions which were measured by APV(Adaptive Phase/Doppler Velocimetry) under atmospheric condition at 320cc/min kerosine fuel flow and 0.04kg/sec air supply. A dual swirler with circumferential two-stage swirl vanes of $40^{\circ}\;and\;45^{\circ}$ vanes in different directions and two single-stage swillers of $40^{\circ}$ vanes with 12 and 16 vanes were tested. It was found that the dual swirler has the largest recirculating zone with highest reverse flow velocity. The strongest swirl flow was found at the boundary of recirculation zone. Small fuel droplets were observed in the main axial stream and inside the recirculation zone when swirling flow field were generated by the frontal devices. These findings could give the tips on the optimal design of frontal devices to realize low emissions in gas turbine combustion.

• Archives of Plastic Surgery
• /
• 제32권6호
• /
• pp.763-766
• /
• 2005

The restoration of the fingernail is not simple in case of amputated distal fingertip which involved the pulp and nail. The nail should maintain a length of at least 2 mm from the eponychium for an adequate grip and decent appearance. Various methods to reconstruct the fingernail bed are available. The nail bed graft from amputated finger or great toe, and free onychocutaneous flap are commonly used. The nail bed of the injured tip tends to be atrophied, deformed and failed as a graft. And the great toe is often turned down as a donor. We have restored satisfactorily the nail beds of three injured finger tips with eponychial cutaneous flaps. The pulps were reconstructed with either a reverse dorsal digital island flap or free pulp graft. Repeated again. A mean follow- up was six months. The nail grew up to the average of 3.7 mm. All patients were satisfied with the length of the nail and met with good cosmetic results. An eponychial cutaneous flap is useful to restore the nail of the distal fingertip amputation. The procedure is relatively simple and morbidity is minimum.