• 한국지반공학회논문집
• /
• 제29권5호
• /
• pp.29-38
• /
• 2013

G-class 시멘트는 지열발전소 가동 시에 지열정에서 고온의 지열수나 증기를 심부에서 지표면까지 이동시키는 케이싱을 보호하는 시멘팅 재료로서 이용된다. 지열정을 통한 원활한 지열발전을 위해서는 시멘팅 재료의 물리적 특성들이 만족되어야 한다. 본 연구에서는 G-class 시멘트를 지열정 시멘팅 재료로서의 중요한 물리적 특성인 유동성, 일축압축강도, 열전도도, free fluid 함유율(Free fluid content) 등을 평가하기 위해, 다양한 물/시멘트 비 조건에서 실내실험을 수행하였다. G-class 시멘트에 대한 물리적 특성 평가를 통해 다음과 같은 결론을 도출하였다. (1) G-class 시멘트의 유동성은 소량의 응고지연제(retarder)를 첨가하여 증가 시킬 수 있다. (2) 유동성 확보를 위해 물/시멘트 비를 높일 경우, 일축압축강도가 감소하여 지열정의 구조적 문제를 야기할 수 있다. (3) G-class 시멘트의 열전도도는 지열정 가동 시에 지열정에서 외부 지반으로의 열손실이 거의 없을 정도로 낮게 평가되었다. (4) G-class 시멘트를 시멘팅 재료로 이용할 경우, 블리딩(bleeding) 가능성은 매우 낮은 것으로 판단된다. (5) 페놀프탈레인 지시약은 지열정 시공시 지표면에서 시추용 이수와 G-class 시멘트를 구분하기 위해 적합할 것으로 판단된다.

• 마이크로전자및패키징학회지
• /
• 제31권3호
• /
• pp.67-71
• /
• 2024

RM (reactive mesogen) 기반 투과율 가변형 스마트윈도우는 두 장의 스마트윈도우를 겹쳐 RM의 배향 각도의 차이에 따라 편광된 빛을 투과 또는 차단시킬 수 있다. 본 연구에서는 RM 기반 스마트윈도우의 창호 적용 가능성을 고려하여, 외부로부터 유입되는 태양열의 차단 성능에 대한 평가 시험을 수행하였다. 이를 위해 300×300 mm² 크기의 λ/4 위상지연 필름 기반 스마트 윈도우를 제작하였으며, 이후 300 nm ~ 2500 nm 파장대역에서 스마트윈도우의 투과/반사율 데이터를 이용하여 시뮬레이션을 통한 태양열취득율 (SHGC, solar heat gain coefficient) 값을 도출하였다. 시뮬레이션 결과, 투과모드와 차단모드에서 SGHC가 각각 0.722, 0.615의 값을 얻어 동작 모드에 관계없이 태양열 차단에 효과가 있다는 것을 확인하였다. 최종적으로 스마트윈도우 적용 시 온도 상승 억제에 대한 영향성을 검증하기 위해 테스트 박스를 제작하였으며, 세 개의 테스트 박스 (reference, 스마트윈도우 투과/차단 모드) 내부의 온도를 10분 주기로 7일 동안 관찰하였다. 오후 1시를 기준으로, 스마트윈도우가 적용된 테스트 박스의 내부 온도는 동작모드와 관계 없이 reference (유리기판)와 비교하여 낮은 내부 온도를 보였다. 특히 reference의 온도가 66.1℃로 가장 높았던 날에는 스마트윈도우가 적용된 테스트 박스의 온도는 61.0℃로 5.1℃의 온도 상승 억제 효과를 보여 위상지연 필름 기반 스마트윈도우의 태양열 차단 성능을 확인하였다.

• 한국세라믹학회지
• /
• 제21권4호
• /
• pp.355-360
• /
• 1984

The effect of 2% of $P_2O_5$ substituted in gypsum(5 mol% as $HPO_3$) on the early hydration characteristics of $C_3A$ were investigated and then gypsum only and gypsum mixed with $Ca(H_2PO_4)_2$.$H_2O$(2% as $P_2O_5$) were studied separately for comparison. The early hydration reaction of $C_3A$ with each gypsum were examined by measuring the rate of heat libera-tion of hydration with calorimeter and by analysing the hydration products with X-ray diffractometer and differential thermal analyser. It was shown that phosphogypsum substituted with $P_2O_6$ in the crystal lattice accelerated exceedingly the formation of the ettrignite and following hydrated products. However the other gypsum especially gypsum without any phosphate delayed the formation of various hydration products, It was consequently suggested that when phosphogypsum are used as the retarder of cement setting its reta-rding effect for setting of cement is not ascribed to the retardation of ettringite formation.

• 한국건축시공학회지
• /
• 제7권4호
• /
• pp.109-116
• /
• 2007

Building structures are generally large in size and have a long life, and the construction of such structures requires the investment of a huge amount of money and social infrastructure. Furthermore, building structures are closely related to people's life. Recently, however, the rapid development of society has been worsening air pollution, which is in turn accelerating the degradation of building structures. Thus, the safety of building structure is emerging as a critical issue. To cope with this problem, the government enacted "The Special Act on Safety Control for Infrastructure" but we need engineers' higher concern over the maintenance and reinforcement of existing structures. Recently researches are being made actively on repair mortar using ultra rapid hardening cement for recovering the performance of structures. The present study conducted an experiment on the basic physical properties of ultra rapid hardening mortar for repairing and reinforcing building structures using magnesia cement and mono-ammonium phosphate. In the experiment, we changed the water-cement ratio and carried out replacement at different ratio of MAP/MgO(%). We used retarder to have working life, and made comparative analysis through evaluating working life and fluidity and measuring strength by age.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.72-78
• /
• 2009

We propose the separation algorithm to simultaneously measure two-dimensional refractive index distribution and thickness profile of transparent samples using three wavelengths. The optical system was based on the Mach-zehnder interferometer with LD (Laser Diode)-based multi-wavelength sources. A LCR (Liquid Crystal Retarder) was used to obtain interference images at four phase states and then the optical phase of the object is calculated by four-bucket algorithm. Experimental results with a glass rod are provided at the different wavelengths of 635nm, 660nm and 675nm. The refractive indices of the sample are distributed with accuracy of less than 0.0005 and the thickness profile of sample was cylindrical type. This result demonstrates that it is possible to separate refractive index distribution and thickness profile of samples in two dimensions using the proposed algorithm.

• Journal of Information Display
• /
• 제12권3호
• /
• pp.115-119
• /
• 2011

Optically isotropic liquid crystal (LC) mixture such as blue-phase LC and nanostructured LC composites exhibit the advantages of fast response time, high contrast ratio and wide-viewing angle due to the induced birefringence along the horizontal electric field. Utilizing this mixture, a novel single cell gap in-plane switching-type polymer-stabilized blue-phase transflective liquid crystal display by embedding the nanowire grid polarizer as a polarization-dependent reflective polarizer in the R region is proposed. This device can be used as a normal black mode without any quarter-wave plate or patterned in-cell phase retarder. Moreover, the transmittance is identical to the reflectance so that it will be suitable for single gamma driving. Detailed electro-optic performances, such as voltage-dependent light efficiency and viewing angle of the proposed device configuration, are investigated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.453-460
• /
• 2005

Sodium silicate - the usual portland cement which accomplishes a cement pouring reconsideration main stream and sodium silicate(No.3) after reacting sodium silicate(No.3) with the reaction sodium silicate where oxidation natrium which is included does not react with the cement receiving stiffening water it will burn together on underwater and to become the durability lacks pouring it is recognized. From the hazard which improves an advantage it used the additive which relates in congealing and stiffening of the portland cement and sodium tripolyphosphate(STPP) addition hour initial material age(72 hours at once) which does to be revealed the at high-in-tensity is discovered while accomplishing. The effect of additives on the reactions of sodium silicate solution and cement suspesion was investigated by various physical and chemical tests, such as Si-NMR, XRD, SEM uniaxial compression test. The additives were STPP(sodium tripolyphosphate), EDTA, SUGAR. The compressive strength of sodium silicate(No.3) - cement grout with additives was about $1.5{\sim}10$ times higher than that without additive in early age(72 hours).

• Journal of the Korean Wood Science and Technology
• /
• 제44권2호
• /
• pp.283-293
• /
• 2016

Owing to an increase in the air tightness of recent buildings, the natural ventilation rate was significantly lowered and the removal of accumulated moisture became difficult in these buildings. The hygrothermal performance of these buildings should be carefully considered to provide comfortable indoor environment by removing the moisture condensation risk and the mold growth potential. In this study, hygrothermal performance of two selected wall structures was investigated based on WUFI simulation program. The results displayed that the indoor temperature had impact on the moisture accumulation in the insulation layer for both modeled walls, showing that lower indoor temperature resulted in higher moisture accumulation, especially in the wood frame structure. Also, the yearly moisture accumulation profile exhibited a downward shift throughout the year by adding a vapour retarder with a lower sd-value. In addition, both of the two walls have condensation risk in winter, due to low temperature level. The wood frame structure has a bigger fluctuation and higher condensation risk than the concrete structure.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.343-349
• /
• 1998

$TiCL_4$수용액의 탈수 반응에 있어 pH의 영향에 관하여 연구하였다. KOH와 HCl을 탈수 촉진 및 탈수 지연제로 사용하여 실험한 결과 다음과 같은 결론을 얻었다. $TiCL_4$ 수용액과 KOH와의 반응계에서 중화점은 pH 7.4이었으며 중화점 이전에서는 반응 생성물로 polymetatitanic acid의 중합체인 Ti-gel이 생성되고 중화점 이상에서는 재탈수 반응에 의하여 oligomer화가 일어난다. 또한 결정성 potasium titanate는 존재하지 않는다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.340-343
• /
• 2008

This work reports the simple fabrication of the single cell gap transflective liquid crystal display (LCD) using wire grid polarizer. The nano sized wire grid polarizer was patterned on common electrode itself, on the reflective part of FFS (Fringe field switching) mode whereas the common electrode was unpatterned at transmissive part. However, this structure didn't show single gamma curve, so we further improved the device by patterning the common electrode at transmissive part. As a result, V-T curve of proposed structure shows single gamma curve. Such a device structure is free from in-cell retarder, compensation film and reflector and furthermore it is very thin and easy to fabricate.