• 한국치위생학회지
• /
• 제9권1호
• /
• pp.27-43
• /
• 2009

Purpose : The purpose of this study was to examine the oral health state of disabled people with mental retardation in an attempt to pave the way for oral health care planning geared toward the disabled. Subjects and Method : The subjects in this study were 46 mentally retarded people who attended rehabilitation centers for the disabled in the city of Wonju, Gangwon Province. After a survey was conducted, the collected data were analyzed with SPSS 13.0 program, and frequency analysis, percentage, ANOVA and t-test were utilized. Results : The findings of the study were as follows: 1. The simplified oral hygiene index of the mentally retarded people was 1.32, which was on the average. 2. The decayed teeth index and decayed teeth rate of the mentally retarded people were respectively 13.48 and 48.13 percent, which were above the average. 3. The decayed surface index and decayed surface rate of the mentally retarded people were respectively 27.17 and 17.39 percent. 4. The simplified debris index of the mentally retarded people significantly varied with gender(p<.01), and missing teeth index(p<.05) and missing surface index differed significantly with age. Filled surface index was significantly different according to the region. Conclusion : The findings of the study illustrated that their indexes related dental caries experience were high. In order to promote the oral health of the disabled with mental retardation, prolonged research should be implemented, and a dental checkup should be carried out on a regular basis by specialists. Preventive care and early treatment should be provided, and the development of customized oral health education programs tailored to different sorts of disabilities and oral health control methods is required.

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.448-454
• /
• 1996

BaTiO3 세라믹스의 입방정과 육방정간의 상전이에 따른 미세조직 변화를 관찰하였다. 입방정을 육방정영역에서 열처리하는 경우, 시편 표면부터 육방정상이 생성되었고 반대로 육방정을 입방정역에서 열처리하여 상전이 시킬때는 입방정상이 시편이 중심부에서부터 생성되었다. 또한 이러한 상전이 과정 중에는 빠른 입성장과 더불어 불규칙적인 입계형태를 나타내었다. 그 외 낮은 성형압으로 소결체의 밀도가 낮은 육방정 시편을 제조한 경우에는 상대적으로 입방정으로의 상전이가 억제되었다. 이러한 결과들은 육방정의 표면에너지가 입방정보다 상대적으로 낮기 때문으로 해석되었다.

• 생명과학회지
• /
• 제10권5호
• /
• pp.519-523
• /
• 2000

The action spectrum for light-induced growth of fruit body in Pleurotus ostreatus has been studied by irradiation at various wavelengths. Effective wavelengths were distributed from near ultraviolet to blue region of spectrum. The most effect of light was observed in the region between 340 to 520 nanometers. The growth weigth obtained from which has been irradiated 144 hours in the region of 340-520 nm increases 74%, on the contrary the observed growth weight has been observed in the longer wavelengths than 620 nm. The pileus size was promoted 30$\times$32% in the region of 340-500 nm, and retarded 22$\times$19% in the dark. the strip length was rearded 12% in the region of 340-500 nm, and promoted 38% in the dark. The color thickness for pileus is getting light in longer wavelengths.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권5호
• /
• pp.1086-1090
• /
• 2001

In this paper, a method deciding the permissible gains of the P and PT controllers for a retarded process under stable condition is proposed. For analysis, the controlled process is assumed to be first-order system with time delay. At first, the adjustable parameter sets causing stability limit are obtained based on the frequency domain condition which makes the roots of the characteristic equation locate on the imaginary axis. And the cut-in frequency ${\omega}_p$ to bring the parameter set to P control from PI control is derived is derived in terms of L and $T_m$ then ${\omega}_p$ is used to compute the maximum gain with stable condition. The results indicate that the permissible controller gains can be described by a unique if parameters L and $T_m$ are know.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.207-212
• /
• 2001

In this paper, a method to be able to decide the possible maximum gain of P, PI control for the retarded processes under stable condition is proposed. At first, adjustable parameter set causing stability limit are obtained based on the frequency domain condition which makes the roots of transfer function locate on the $j\omega$ axis. And the cut-in frequency $\omega{_p}$ to bring the parameter set to P control from PI control is derived by an equation with 2 parameters L and $T_m$ given, then $\omega{_p}$ is used to compute the maximum gain with stable condition. For the calculation, the controlled process of first order system with time delay element is introduced and all parameters are presumed to be time invariant.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.143-145
• /
• 2007

The correlation between crystallization and deformation behavior in the supercooled liquid region (SLR) of a $Cu_{54}Ni_{6}Zr_{22}Ti_{18}$ bulk metallic glass (BMG) alloy is investigated by compression tests, differential scanning calorimetry (DSC), electron energy loss spectrometry (EELS) and high resolution transmission electron microscopy (HRTEM). In the SLR, This BMG alloy was strongly depended on the deformation temperature and the alloy exhibits important change in deformation behavior after a given time which is directly connected to the development of crystallization. Compressive stress impeded decomposition and consequently retarded forming of nano-crystal, which led to enlarge the homogeneous deformation region of the BMG alloy in SLR during compression test.

• 생명과학회지
• /
• 제15권1호
• /
• pp.55-60
• /
• 2005

생쥐의 도파민 수용체 조절인자 (DRRF)유전자는 몇몇 Spl 결합부위를 가지고 TATA가 없는 프로모터로부터 전사된다. 본 연구에서는 이 유전자의 발현을 조절하는 기능성 조절인자들을 밝힌다. $D_2$ 도파민 수용체를 발현하는 NB41A3 세포에서 Spl은 pCAT-DRRF-l153/+17에 포함된 DRRF 프로모터부터 의 전사를 촉진시키지만 DRRF는 전사를 억제시켰다. -1153과 -1122 사이의 31 bp 단편의 결손에 의해 전사활성은 약 $60\%$ 정도 감소하였다. 이 단편은 기능성 AP1 결합부위를 포함하고 있다 게다가, -901과 -772사이의 129 bp영역의 결손에 의해 전사활성이 더욱 더 감소하였다. 이 영역은 기능성 AP2 결합부위를 가진다. DRRF_AP1 (bases -1153 to -1121) 탐침을 이용한 gel shift실험에서 특정 벤드가 관찰되었고, 이 벤드는 API 상보성 경쟁자에 의해 효과적으로 사라졌다. 더욱이, DRRF_AP2 (bases -873 to -846) 탐침을 이용한 gel shift실험에서도 특정 벤드가 관찰되었고, 이 벤드도 AP2상보성 경쟁자에 의해 효과적으로 사라졌다. 본 연구결과로, Spl과 DRRF가 DRRF 프로모터를 효과적으로 조절한다는 사실과, AP1과 AP2 역시 이 유전자를 조절한다는 사실을 알 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.215-217
• /
• 2008

Crystallization behavior of the bulk metallic glass (BMG) during compression and tension was studied in the supercooled liquid region (SLR). Rod samples of the BMG alloy were produced by consolidating gas atomized powders of $Cu_{54}Zr_{22}Ti_{18}Ni_6$ using spark plasma sintering. The crystallization behavior in these samples was examined by tackling changes in thermal property during heating the samples in DSC. The present BMG alloy was firstly decomposed and then crystallized during annealing in the SLR. The phase decomposition from the original amorphous phase was retarded by the compressive stress, while it was accelerated by the tensile stress.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.928-932
• /
• 1996

Single overload fatigue tests with overload sizes ranging from 50% and 100% have been performed to investing ate the fatigue crack growth retardation behavior. A modified and experimental method of Willenborg's model for prediction of crack growth retardation behavior has been developed, based on evaluations of equivalent plastic zone size (EPZS) changing its size along the overload plastic zone boundary. The minimum crack growth rates of each overload size are linearly decreased with overload size increasing, but fatigue lives extended by single overload are increasing much more unlike the crack growth rates. Comparisons of crack growth behavior predicted by EPZS model and Willenborg model have shown that the EPZS model accounts for overload effects better than Willenborg model. These effects include delayed retardation, large retardation region, minimum crack growth rate, and the increase rate of crack growth rate in the region crack growth rate recovered.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.583-589
• /
• 2016

In this study, recrystallization behaviors in the two-phase (${\alpha}+{\gamma}$) region of micro-alloyed steels such as Base, Nb, TiNbV and CAlN were investigated in terms of flow stress, microstructure and associated grain boundary characteristics. The flow stress of all specimens reached peak stress and gradually decreased, which means that recrystallization or recovery of proeutectoid deformed ferrite and recovery or transformation to ferrite of deformed austenite occurred by thermal activation. The precipitation of carbide or nitride via the addition of micro-alloying elements, because it reduced prior austenite grain size upon austenitization, promoted transformation of austenite to ferrite and increased flow stress. The strain-induced precipitation under deformation in the two-phase region, on the other hand, increased the flow stress when the micro-alloying elements were dissolved during austenitization. The recrystallization of the Nb specimen was more effectively retarded than that of the TiNbV specimen during deformation in the two-phase region.