• 한국항해항만학회지
• /
• 제27권2호
• /
• pp.239-246
• /
• 2003

해양에 기름이 유출되면 방제작업의 초기단계에서 기름의 이동 및 확산을 차단하기 위하여 오일 붐을 사용하는 것이 일반적이다. 그러나 오일 붐은 유속, 기름의 밀도와 점성, 수심, 기름의 양, 그리고 붐 흘수의 길이 등과 같은 여러 인자들에 의해 그 포획능력이 영향을 받는다. 본 연구에서는 이들 누유인자가 오일 붐의 포획과정에 어떠한 영향을 미치는지를 체계적으로 파악하기 위하여 컴퓨터 모델링을 수행하였다. 모델링을 위하여 CFD(computational fluid dynamics) 프로그램 중에서 가장 널리 알려진 Fluent를 이용하였으며 기존의 실험자료와 비교함으로써 모델링 결과를 검증하였다. 본 연구의 결과는 방제작업 책임자와 오일 붐 설계자에게 유용한 참고자료가 될 것으로 기대된다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2003년도 춘계공동학술대회논문집
• /
• pp.171-178
• /
• 2003

해양에 기름이 유출되면 방제작업의 초기단계에서 기름의 이동 및 확산을 차단하기 위하여 오일 붐을 사용하는 것이 일반적이다. 그러나 오일 붐은 유속, 기름의 밀도와 점성, 수심, 기름의 양, 그리고 붐 홀수의 길이 등과 같은 여러 인자들에 의해 그 포획능력이 영향을 받는다. 본 연구에서는 이들 누유인자가 오일 붐의 포획과정에서 어떠한 영향을 미치는지를 체계적으로 파악하기 위하여 컴퓨터 모델링을 수행하였다. 모델링을 위하여 CFD(computational fluid dynamics) 프로그램 중에서 가장 널리 알려진 Fluent를 이용하였으며 기존의 실험자료와 비교함으로써 모델링 결과를 검증하였다. 본 연구의 결과는 방제작업 책임자와 오일 붐 설계자에게 유용한 참고자료가 될 것으로 기대된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.45-46
• /
• 2012

This study is intended to use the insulation effect of the dual bubble sheet to review the freezing prevention capability of underground walls by pouring the dual bubble sheet on the retaining walls before the concrete pouring to contemplate the temperature profile for each area of installation and the area of non-installation of the dual bubble sheet, and as a result, the temperature of the concrete was heightened than the ground due to the insulation effect in using the bubble sheet.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.190-198
• /
• 2011

프리캐스트 콘크리트제품은 빠른 시공, 노동력 절감, 높은 품질확보의 장점을 가지고 있어 옹벽구조물 분야에도 많이 적용하고 있다. 본 논문에서는 철도에 적용되는 프리캐스트 프리스트레스트로 제작된 옹벽의 동적안정성을 평가하기 위하여 이동열차 하중 재하상태에서의 수치해석을 수행하였다. 해석에는 2차원 유한요소 해석이 적용되었다. 궤도에 작용하는 이동열차하중은 이동하중에 대한 충격력을 대표하는 조도성분의 위상각 자료와 열차자중을 대표하는 준정적 하중을 조합하여 사용하였다. 해석에는 노반과 옹벽구조물의 시간영역 변위, 응력, 가속도 결과값을 이용하여 옹벽의 동적안정성을 평가하였으며, 평가결과 충분한 적용성을 확인하였다.

• 지식경영연구
• /
• 제2권1호
• /
• pp.109-132
• /
• 2001

The purpose of this article is to develop a dynamic model of organizational capabilities and knowledge creation, and at the same time identify the organizational capability factors for effective knowledge creation, by empirically analyzing the history of new Quinolone antibacterial drug compound (LB20304a) discovery process at LG, as a case in point. Major findings of this study are as follows. First, in a science-based area such as drug development, the core of successful knowledge creation lies in creative combination of different bodies of scientific explicit knowledge. Second, the greater the difficulty of learning external knowledge, the more tacit knowledge is needed for the recipient firm to effectively exploit that knowledge. Third, in science-based sector such as pharmaceutical industry, the key for successful knowledge creation lies in the capability of recruiting and retaining star scientists. Finally, for effective knowledge creation, a firm must keep its balance among three dimensions of organizational capabilities: local, process, architectural capabilities.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.361-397
• /
• 2017

The unloading effect from excavations can cause the deformation of adjacent tunnels, which may seriously influence the operation and safety of those tunnels. However, systematic studies of the deformation characteristics of tunnels located along side excavations are limited, and simplified methods to predict the influence of excavations on tunnels are also rare. In this study, the simulation capability of a finite element method (FEM) considering the small-strain characteristics of soil was verified using a case study. Then, a large number of FEM simulations examining the influence of excavations on adjacent tunnels were conducted. Based on the simulation results, the deformation characteristics of tunnels at different positions and under four deformation modes of the retaining structure were analyzed. The results indicate that the deformation mode of the retaining structure has a significant influence on the deformation of certain tunnels. When the deformation magnitudes of the retaining structures are the same, the influence degree of the excavation on the tunnel increased in this order: from cantilever type to convex type to composite type to kick-in type. In practical projects, the deformation mode of the retaining structure should be optimized according to the tunnel position, and kick-in deformation should be avoided. Furthermore, two methods to predict the influence of excavations on adjacent tunnels are proposed. Design charts, in terms of normalized tunnel deformation contours, can be used to quantitatively estimate the tunnel deformation. The design table of the excavation influence zones can be applied to determine which influence zone the tunnel is located in.

• Advances in aircraft and spacecraft science
• /
• 제2권3호
• /
• pp.345-365
• /
• 2015

This paper focuses on the design, fabrication, testing and analysis of a novel load-bearing element with energy dissipation capability. A single element comprises two von-Mises trusses (VMTs), which are sandwiched between two plates and connected to dashpots that stroke as the VMTs cycle between stable equilibrium states. The elements can be assembled in-plane to form a large plate-like structure or stacked with different properties in each layer for improved load-adaptability. Also introduced in the elements are pre-loaded springs (PLSs) that provide high initial stiffness and allow the element to carry a static load even when the VMTs cannot under harmonic disturbance input. Simulations of the system behavior using the Simscape environment show good overall correlation with test data. Good energy dissipation capability is observed over a frequency range from 0.1 Hz to 2 Hz. The test and simulation results show that a two layer prototype, having one soft VMT layer and one stiff VMT layer, can provide good energy dissipation over a decade of variation in harmonic load amplitude, while retaining the ability to carry static load due to the PLSs. The paper discusses how system design parameter changes affect the static load capability and the hysteresis behavior.

• 한국전자거래학회지
• /
• 제15권3호
• /
• pp.183-193
• /
• 2010

오늘날 정보기술의 발전으로 인해, 기업의 비즈니스 환경은 하루가 다르게 변화하고 있다. 이에, 기업들은 비즈니스 변화의 흐름에 대비하고, 더 나은 성과를 얻기 위해 다양한 가치창출 방안을 탐색하고 있는 것이 현실이다. 더욱이 기업들은 오래 전부터 기업성과를 향상시키기 위한 방안으로 우수한 인재를 확보하는데 많은 노력을 기울여 왔다. 이에 본 논문에서는 급변하는 경영 환경에서 기업이 더 나은 가치를 창출하기 위해, 요구되는 기업 구성원들의 역량요인을 분석하기 위한 연구분석 모형을 제시하였다. 이를 위해 본 논문에서는 아래와 같은 연구를 수행하였다. 첫째, 선행연구를 통해 기업성과 향상에 필요한 역량 유형 및 개인 역량요인을 분석하였다. 둘째, 분석된 결과를 토대로, 융합기술 환경에서 기업 구성원에게 요구되는 역량을 태도 숙련된 업무능력 그리고 지식으로 제시하였다. 마지막으로 본 논문에서 제시된 연구분석모형의 타당성 분석을 위해 기업의 인사담당자들을 대상으로 전문가 인터뷰 및 대규모 설문조사를 실시하였다.

• Asia pacific journal of information systems
• /
• 제15권3호
• /
• pp.187-207
• /
• 2005

In the Internet-based B2C e-commerce, trust has been recognized as a critical factor to reduce uncertainties, through interacting with a well-known specific shopping mall. In this study, we view customer trust as not a unitary concept but multidimensional one consisted of the trustworthiness of trustee, familiarity with the specific shopping-mall, disposition to trust, and institution-based trust. In this study, first, we considered the trustworthiness of trustee consisted of capability, benevolence, and integrity as one of the major factors to build customer trust on the specific Internet shopping-mall. In the context of the Internet e-commerce, the role of institutional structures is very important to assure the customer trust from the various opportunistic behaviors because of the characteristics of internet-based commerce such as impersonality, the lack of information on the other party, and the transactions with a number of anonymous people. Second, we examined the effect of the institution-based trust built by institutional structures on customer trust. Third, we examined the effect of customer trust and familiarity on retaining customer loyalty. Our findings showed that customer trust and familiarity played a major role in retaining customer loyalty with the specific shopping-mall. In conclusions, we discussed the strategies to build the customer loyalty for maintaining the customer. We suggest customer trust and familiarity for the factors to bind the customer with the specific shopping-mall based on these results.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.957-962
• /
• 2018

The gamma radiation shielding capability (GRSC) of two clay-materials (Ball clay and Kaolin)of Southwestern Nigeria ($7.49^{\circ}N$, $4.55^{\circ}E$) have been investigated by determine theoretically and experimentally the mass attenuation coefficient, ${\mu}/{\rho}(cm^2g^{-1})$ of the clay materials at photon energies of 609.31, 1120.29, 1173.20, 1238.11, 1332.50 and 1764.49 keV emitted from $^{214}Bi$ ore and $^{60}Co$ point source. The mass attenuation coefficients were theoretically evaluated using the elemental compositions of the clay-materials obtained by Particle-Induced X-ray Emission (PIXE) elemental analysis technique as input data for WinXCom software. While gamma ray transmission experiment using Hyper Pure Germanium (HPGe) spectrometer detector to experimentally determine the mass attenuation coefficients, ${\mu}/{\rho}(cm^2g^{-1})$ of the samples. The experimental results are in good agreement with the theoretical calculations of WinXCom software. Linear attenuation coefficient (${\mu}$), half value layer (HVL) and mean free path (MFP) were also evaluated using the obtained ${\mu}/{\rho}$ values for the investigated samples. The GRSC of the selected clay-materials have been compared with other studied shielding materials. The cognizance of various factors such as availability, thermo-chemical stability and water retaining ability by the clay-samples can be analyzed for efficacy of the material for their GRSC.