• Steel and Composite Structures
• /
• 제6권1호
• /
• pp.15-31
• /
• 2006

Beams with web openings are an attractive system for multi-storey buildings where it is always desirable to have long spans. The openings in the web of steel beams enable building services to be integrated within the constructional depth of a floor, thus reducing the total floor depth. At the same time, the increased beam depth can give high bending moment capacity, thus allowing long spans. However, almost all of the research studies on web openings have been concentrated on beam behaviour at ambient temperature. In this paper, a preliminary numerical analysis using ABAQUS is conducted to develop a general understanding of the effect of the presence of web opening on the behaviour of steel beams at elevated temperatures. It is concluded that the presence of web openings will have substantial influence on the failure temperatures of axially unrestrained beams and the opening size at the critical position in the beam is the most important factor. For axially restrained beams, the effect of web openings on the beam's large deflection behaviour and catenary force is smaller and it is the maximum opening size that will affect the beam's response at very high temperatures. However, it is possible that catenary action develops in beams with web openings at temperatures much lower than the failure temperatures of the same beam without axial restraint that are often used as the basis of current design.

• Structural Engineering and Mechanics
• /
• 제6권2호
• /
• pp.143-159
• /
• 1998

The objective of this present work is to estimate the failure loads, associated maximum transverse displacements, locations and the modes of failure, including the onset of delamination, of thin, square symmetric laminates under the action in-plane positive (+ve) shear load. Two progressive failure analyses, one using the Hashin criterion and the other using a Tensor polynomial criterion, are used in conjunction with finite element method. First order shear deformation theory along with geometric non-linearity in the von Karman sense have been employed. Variation of failure loads and failure characteristics with five type of lay-ups and three types of boundary conditions has been investigated in detail. It is observed that the maximum difference between failure loads predieted by various criteria depends strongly on the laminate lay-up and the flexural boundary restraint. Laminates with clamped edges are found to be more susceptible to failure due to transverse shear (ensuing from the out of plane bending) and delamination, while those with simply supported edges undergo total collapse at a load slightly higher than the fiber failure load. The investigation on negative (-ve) in-plane shear load is in progress and will be communicated as part-II of the present work.

• Wind and Structures
• /
• 제13권5호
• /
• pp.471-485
• /
• 2010

In comparison with the common two-tower suspension bridge, due to the lack of effective longitudinal restraint of the center tower, the three-tower suspension bridge becomes a structural system with greater flexibility, and more susceptible to the wind action. By taking a three-tower suspension bridge-the Taizhou Bridge over the Yangtze River with two main spans of 1080 m as example, effects of structural parameters including the cable sag to span ratio, the side to main span ratio, the deck's dead load, the deck's bearing system, longitudinal structural form of the center tower and the cable system on the aerodynamic stability of the bridge are investigated numerically by 3D nonlinear aerodynamic stability analysis, the favorable structural system of three-tower suspension bridge with good wind stability is discussed. The results show that good aerodynamic stability can be obtained for three-tower suspension bridge as the cable sag to span ratio is assumed ranging from 1/10 to 1/11, the central buckle are provided between main cables and the deck at midpoint of main spans, the longitudinal bending stiffness of the center tower is strengthened, and the spatial cable system or double cable system is employed.

• Biomolecules & Therapeutics
• /
• 제4권2호
• /
• pp.111-121
• /
• 1996

Antiulcer effects of Artemisia herba extract (DA-9601) were evaluated in various types of experimental gastric ulcer induced in rats. And the effects of DA-9601 on mucus, basal and stimulated gastric acid secretion were also investigated in rats. DA-9601 (12.5∼400 mg/kg, p.o.) prevented the formation of gastric ulcers induced by 60% EtOH in 150 mM HC1, restraint water immersion stress, platelet activating factor (PAF), aspirin in 150 mM HCI with Pylorus-ligation and indomethacin. DA-9601 (4∼400 mg/kg, p.o.) significantly accelerated the healing rate of acetic acid-induced gastric ulcer and significantly stimulated mucus secretion in a dose-dependent manner. DA-9601 (20∼200 mg/kg, i.d.), however, did not inhibit basal gastric acid secretion in pylorus ligated rats and DA-9601 (200 mg/kg, i.d.) failed to influence histamine-, pentagastrin- and carbachol- stimulated gastric acid secretion. These results suggest that DA-9601 has inhibitory action on gastric lesion and ulceration through increasing mucus secretion in the stomach of rats without influencing basal and stimulated gastric acid secretion.

• Steel and Composite Structures
• /
• 제35권2호
• /
• pp.159-169
• /
• 2020

Sandwich composite wall consists of concrete core attached by two external steel faceplates. It combines the advantage of steel and concrete. The appropriate composite action between steel faceplate and concrete core is achieved by using adequate mechanical connectors. This research studied the compressive behavior of the sandwich composite walls using steel trusses to bond the steel faceplates to concrete infill. Four short specimens with different wall width and thickness of steel faceplate were designed and tested under axial compression. The test results were comprehensively evaluated in terms of failure modes, load versus axial and lateral deformation responses, resistance, stiffness, ductility, strength index, and strain distribution. The test results showed that all specimens exhibited high resistance and good ductility. Truss connectors offer better restraint to walls with thinner faceplates and smaller wall width. In addition, increasing faceplate thickness is more effective in improving the ultimate resistance and axial stiffness of the wall.

• Biomolecules & Therapeutics
• /
• 제13권3호
• /
• pp.165-173
• /
• 2005

The main aim of this study was to investigate stress related activities of ginsenosides and their action mechanism. Control group and ginsenoside supplemented groups were exposed to stress while no-stress group was not done. Animals of each group (n=$8\~10$) were orally administerd 100 mg red ginseng extract (R-G), or 10 mg ginsenosides/kg body weight once a day. Animals were given materials for 5 days without stress, and then were given supplements for 5 days with restraint and electroshock stress. Mice were given materials for 5 days for experiments on anti-fatigue effect. After loading final stress, stress-related behavioral changes of experimental animals were examined and plasma corticosterone levels were measured. R-G and ginsenoside $Rb_{1}$ supplementation partially blocked the stress effects on locomotion and elevated plus-maze test in rats and mice. They also partially blocked stress induced behavioral changes such as freezing, smelling, face-washing, rearing behavior in rats. R-G and $Rb_{1}$ decrease adrenal gland size and plasma corticosterone level, which were increased by stress in rats. R-G increased enduring time on the Rota rod, cold water and horizontal wire, but $Rb_{1}$ didn't. Effects of $Rb_{1}$ on plusmaze test were inhibited by administration of flumazenil. These results suggest that $Rb_{1}$ is the main antistress principle in ginseng and it's effect is modulated by GABAnergic nervous system.

• International Journal of Costume and Fashion
• /
• 제5권1호
• /
• pp.14-25
• /
• 2005

The objective of this study is to understand bodily extension and identity in contemporary fashion art through the analysis of 'the fashion acting on the body' among the fashion theory excluding body and the conspicuous works on the opening and covering images as a fashion art as a body-space'. This study also investigated identity problems where there are poles apart in opening and closure their bodies and body-space in which its clothing types were distorted by being de-bodilization out of the traditional and ideological expression method in contemporary fashion art from a opening and closure point of view. Image of opening and closure among body-space in fashion art can be classified into opposing structure of opening and closure. Destroying the boundary between bodily opening and closure for a primary function of clothing and dismantling the role and boundary between body and clothing, opening body-space in appearance as a reemergence of body image or the border between inner and outer are being ambiguous because of transparent material. Being representative work of this study opening body-space was expressed as an opening space image using transparency. On the contrary, closure body-space was isolated from external environment and confined in the certain space, which could limit or restraint body- action. Excluding boundary of body and clothing on the whole or in part, boundary of work becomes body-space. However, these were appeared to be a work inducing unlimited curiosity and meaning from the audience. The interpretation of artistic and body-space in fashion art are indicating the role and function of the fashion art exceeding the suggestible dimensions in the every day life of fashion. The body-space of fashion art showing similar aspect of body art today could be understood that it is substituted into an metaphorical, critical space by seeing it as a symbol system connected with social space. Therefore, contemporary fashion art should be interpreted as an equivocal space looking at the body-space with open mind.

• 전력전자학회논문지
• /
• 제12권5호
• /
• pp.394-399
• /
• 2007

본 논문에서는 소프트 스위칭에 의한 새로운 고효율의 벅-부스트 DC-DC 컨버터에 대해 연구된다. 제안된 벅-부스트 컨버터는 기존의 벅-부스트 DC-DC 컨버터에서 문제가 되는 제어용 스위치의 스위칭 손실증대를 해결하기 위해 새로운 소프트 스위칭 기법이 적용된다. 소프트 스위칭 회로는 구조적으로 기존의 컨버터에 사용되는 벅-부스트용 인덕터와 스너버 회로를 변형 설계한 구조로써 회로구성이 간단하다. 제안된 컨버터에 사용된 제어스위치들은 부분공진의 동작에 의해 소프트 스위칭을 이룬다. 또한 컨버터의 출력전압은 제어스위치의 PWM 제어에 의해 조정되고 벅-부스트용 인덕터에 흐르는 전류는 불연속모드로 제어되어 제어회로와 제어기법이 간단한 장점이 주어진다. 제안된 벅-부스트 컨버터는 기존의 벅-부스트 컨버터와 비교되어 해석되고 컴퓨터 시뮬레이션과 실험을 통해 그 해석적 타당성이 입증된다.

• 대한치과의사협회지
• /
• 제53권9호
• /
• pp.602-609
• /
• 2015

The aim of this document is to evaluate the effect of bite balance on physical fitness and motor capacity to determine the importance of the occlusal stability as a possible action mechanism of occlusal appliance including mouthguards on physical performances. We all remember that day when the prominent athlete was in the news wearing a mouthguard to improve human athletic performance. I once had investigated the determinants of athletic performance in all sorts of sports. Most of the studies had overinterpretation of results and lack of evidence to support the information. However, I discovered great expectations for new possibility in this field and settled for a more academic approach to this intriguing subject. The followings are some examples of the subject 1. Archers who wore occlusal appliances to increase the vertical dimension of occlusion by 2~3mm increased their ability to focus and to maintain good sense of balance. Their accuracy rate has been improved. The appliance was made of acrylic resin (a type of plastic). 2. Canoe players who wore occlusal appliances to increase the vertical dimension of occlusion by 5mm surpassed longtime competitor and won the race with 10 seconds gap. 3. A cycle rider who wore an occlusal appliance to treat his malocclusion surpassed his old record from 10.8 seconds to 10.3 seconds. His muscle reflexes (anaerobic exercise) and endurance (aerobic exercise) has been enhanced. 4. Occlusal appliances had a good effect on athletic performance in most sports such as swimming, diving, and weightlifting. As for the clenching on dentition, people clench their teeth when they push their physical and mental limits during sports activities. Clenching can be induced by physical exertion when maximum muscle strength is retained and this is similarly found in different types of exercises. In addition, restraint of respiratory function is observed. Therefore, creating a occlusal balance with occlusal appliance or mouthguard promoted a favorable influence when an athlete clenches.

• Steel and Composite Structures
• /
• 제36권5호
• /
• pp.507-519
• /
• 2020

Double skin composite walls are increasingly popular and have been applied to many safety-related facilities. They come from the concept of composite slabs. Conventional connectors such as shear studs and binding bars were used in previous studies to act as the internal mechanical connectors to lock the external steel faceplates to the concrete core. However, the restraint effects of these connectors were sometimes not strong enough. In this research, a recently proposed unique type of steel truss was employed along the wall height to enhance the composite action between the two materials. Concrete-filled tube columns were used as the boundary elements. Due to the existence of boundary columns, the restraints of steel faceplates to the concrete differ significantly for the walls with different widths. Therefore, there is a need to explore the effect of height-to-width ratio on the structural behavior of the wall. In the test program, three specimens were designed with the height of 3000 mm, the thickness of 150 mm, and different widths, to simulate the real walls in practice. Axial compression was applied by two actuators on the tested walls. The axial behavior of the walls was evaluated based on the analysis of test results. The influences of height-to-width ratio on structural performance were evaluated. Finally, discussion was made on code-based design.