• Physical Therapy Rehabilitation Science
• /
• v.3 no.2
• /
• pp.101-106
• /
• 2014

Objective: To investigate the appropriate position for abdominal drawing-in maneuver (ADIM) exercise by rehabilitative ultrasound image. Design: Cross-sectional study. Methods: Twenty-eight young adults with no history of low back pain participated in the study. Three positions compared were crook lying position with hip $60^{\circ}$ flexion, standing position with the feet hip width apart and knees straight, and saddle standing positionunsupported with the knees $20^{\circ}$ flexed. Once in the appropriate position, the subjects were verbally cued to draw in their abdominal wall, with the intention of pulling their navel inward toward their lower back. The thickness of each transversus abdominis (TrA), internal oblique (IO), and external oblique (EO) muscles were measured via ultrasound and recorded at the end of inspiration. Results: When compared to the TrA thickness of rest, the TrA thickness was significantly increased in all three positions (crook lying, standing, and saddle standing) during the ADIM (p<0.05). IO thickness was significantly greater in standing and saddle standing than in crook lying (p<0.05). EO thickness was constant in all the three positions. Conclusions: The present study suggests that standing and saddle standing positions could be recommended for the ADIM to maximize recruitment of the TrA and IO activation. Specifically, the saddle standing position with knees flexed to $20^{\circ}$ was observed to increase the TrA activation more than the standing position. These findings should be considered when core stability exercises such as the ADIM are conducted.

• PNF and Movement
• /
• v.21 no.2
• /
• pp.243-253
• /
• 2023

Purpose: This study aimed to investigate the effects of an abdominal drawing-in maneuver (ADIM) with a light load while sitting on transverse abdominis contraction in subjects with and without low back pain. Methods: In this study, 20 participants with chronic low back pain and 20 controls participated. Ultrasonography was used to assess the thickness of the external oblique (EO), internal oblique (IO), and transversus abdominis (TrA) muscles. Muscle thickness was measured at rest and during ADIM in three different sitting postures: (1) just sitting, (2) sitting loaded position (holding a 1 or 2 kg dumbbell in each hand), and (3) sitting loaded shoulder flexion position (holding a 1 or 2 kg dumbbell in each hand). Results: The contraction ratio (CR) and preferential activation ratio (PAR) of the TrA during ADIM had no significant interactional effect between the group and the sitting postures. However, the CR and PRA of the TrA during the ADIM showed significant differences among the three different sitting postures. The CR of the TrA during the ADIM in the sitting loaded shoulder flexion position was significantly increased compared to that in the sitting position (p<0.05). Moreover, the PRA of the TrA muscle during ADIM in sitting loaded and sitting loaded shoulder flexion positions was significantly higher than that in the sitting position (p<0.05). Conclusion: The findings suggest that ADIM in the sitting-loaded shoulder flexion position should be implemented to facilitate TrA activity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.731-752
• /
• 1995

This study was performed to research the changes of masticatory system subsequent to randomly increasing the vertical dimension. The subjects were twenty seven persons, twenty two men and five women, with a mean age of 24.3(age ranged from 22 to 26). The subjects had a complete or almost complete set of natural teeth and reported no subjected symptoms of pain or dysfunction in the masticatory system. The occlusal splint increased vertical dimension was made on semiadjustable articulator. The subjects were randomly divided to three groups according to the vertical dimension, at which the occlusal splint was made. Group I occlusal splints were made at 2mm form the occlusal vertical dimension, group II occlusal splints at 5mm, group III occlusal splints at 8mm. The occlusal splints were almost weared for 2 weeks except meal-time. Clinical examination, muscle activity, changes of free-way space, movement of mandible and articular condyle were recorded and analyzed by means of biopak system(Bioresearch Inc, Millwakee Wisconsin.) and radiograph. 1. In clinical examination, various symptoms were reported by all subjects immediately after the placement of occlusal splint. At the end of experiment, symptoms were lasted by 1 subject in Group I, 2 subjects in Group II, 6 subjects in Group III. At the other subjects, the most of symptoms were disappered within 2-4 days after the placement of occlusal splints. 2. The average free-way space before the startof experiment was 1.77mm in all twenty seven subjects. Immediately after the placement of occlusal splints, 0.67mm at Group I, 0.49mm at Group II, 0.41mm at Group III, At 2 weeks after the placement of occlusal splint 0.93mm, 0.79mm, 0.78mm each other, 1.94mm, 1.77mm, 2.3 mm at immediately after the removal of occlual splint. At 1 week after the removal of occlusal splint, free-way space was recovered to the pre-experimental state 3. In cephalometric radiograph, following either the placement or the removal of the occlusal splints, the movements of mandible in an antero-posterior direction were not statistically significant(p>0.05). 4. In transcranial radiograghs of TMJ, 1 week after the placement of occlusal splint the movement of most superior position on condyle in all group shoed antero-inferior position than before the experiment(p<0.001) and also showed antero-inferior position in mandibular postural rest position than in certric occlusion(p<0.001). Following either the placement or the removal of the splints, the amount of movement of most superior position on condyle was group III. group II and group I in order(p<0.001). 5. In anterior temporal and superficial masseter muscle, muscle activity at postural rest position decreased at 2 weeks after the placement of occlusal splint in group I and group II (p>0.05), but significantly increased in group III(p<0.001). At 1 week after the removal of the occdusal splint, muscle activity at postural rest position was recovered preconditional state 6. In anterior temporal and superficail masseter muscle, muscle activity at clenching in all group was significantly decreased after placement of the occlusal splint, slightly increased during experimental period and recovered to the original state at 1 week after removal of the occlusal splint. But was not statistically significat(p>0.05)s.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.211-220
• /
• 1997

This article describes verticsal dimension in its histologic and clinical aspect. Determination of correct vertical dimension of occlusion is one of the most important steps in prosthodontic rehabilitation. It is considered essential for improvement of facial esthetics and stomatognatic functions. Many techniques have been sued for measurement of the vertical dimension in dentulous and edentulous patients : pre-extraction record, physiologic rest position, swallowing, phonetics, esthetics, etc. But, there is no universally accepted or completely accurate method. Though a great deal of energy has been spent trying to find the exact position of the mandible, there is an controversial aspect of vetical dimension.

• The Korean Journal of Pain
• /
• v.10 no.1
• /
• pp.104-108
• /
• 1997

Spontaneous intracranial hypotension, a syndrome of low CSF pressure, occurs without preceding events such as lumbar puncture, back trauma, operative procedure or medical illness. The most characteristic symptom is an occipital or frontal headache which is aggrevated in the erect position and relieved in the supine position. This syndrome usually resolves spontaneously or with strict bed rest. When the headach persists or is incapacitating, more aggressive treatment may be necessary. Autologous epidural blood patch is highly effective in the management of spontaneous intracranial hypotension. Epidural blood produces an organized clot which effectively tamponade any dural CSF leak. The rapid relief of headache immediately after the infusion of blood occur by some other mechanism, such as an increase in subarachnoid pressure that is known to occur with infusion of fluid into the lumbar epidural space. We report three cases of spontaneous intracranial hypotension successfully treated with epidural blood patch.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.91-97
• /
• 2005

Bones are dynamic structures, being supported by muscles, tendons, and ligaments. When some or all the structures are disturbed i.e. in fractures, the alignment of the bone in respect to the rest of the body is deranged. This gives rise to axial as well as rotational deformity in three dimensional planes. The correct alignment and position of the long bones are to be maintained to heal the bone in the best possible anatomical and functional position. The objective of this research is to address the problems in the current practice involving surgeon, assistant, fluoroscopy and crude mechanical means and to see if a robotic solution exists to solve the problems of manipulating and reducing long bone fractures. This paper presents various design aspects of the proposed surgeon-instructed, image-guided and robotic system including the system design specification, robot design and analysis, motion control and implementation, and x-ray image processing and incorporation in CAD environment.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.50-56
• /
• 2005

This paper develops a sensorless BLDCM drive for frequently startup. The position information is based on detecting the zero-crossing point of the BEMF that can be directly obtained from the terminal voltage of the floating phase without voltage-dividing and filtering. As a result, this approach makes it possible to detect the rotor position over a wide speed range, especially at a lower speed. A fast startup procedure is also discussed because the induced BEMF signals are not present when motor is at rest. Experimental results shows that the schemes implemented are feasible and the performance achieved are satisfactory.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.1
• /
• pp.137-143
• /
• 1991

In the study of the focal trough of panoramic radiograph using Panoura Eight-S (the Yoshida company), a series of 63 X-ray films were taken with the 8-19 metal pins placed in the holes of the plastic model plate and evaluated by 4 observers. The author analized the focal trough defined by the sharpness criteria and calculated dimension of focal trough in the horizontal plane. The results were as follows; 1. Focal trough was not continued in the anterior region within a very high degree of sharpness. 2. With optional sharpness, the width of anterior and posterior focal trough was approximately l3㎜ and 60㎜ respectively. 3. The focal trough was narrow in the anterior region and was flared laterally with symmetry in posterior region. 4. Sharp image began to show at the position of 18㎜ posteriorly from the most anterior position of chin rest.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.43-46
• /
• 2012

The oxygen concentration of primary oxidizer is decided under 10% due to flammable risk. It can be a spontaneous combustion inside burner or tube if the excess oxygen is added to primary oxidizer in Oxy-PC burner. In this case, the rest oxygen which can not be injected to primary oxidizer should be injected to another port. If added it to a second oxidizer, the ignition is unstable at outlet of burner. Accordingly an extra lancing port is needed to insert into the burner unlike other common air mode. And the flame formation and combustion characteristic differ from lancing port position. Therefore we observed flame formation which has stable combustion characteristic according to the shape and position of lancing port.

• The Journal of the Korean dental association
• /
• v.13 no.10
• /
• pp.941-946
• /
• 1975

치과교정학 분야에 있어서 부정교합자의 다양한 하악골 위치변화에 따른 Hyoid bone 위치변화에 대한 연구는 부족한 감이 있어, 저자등은 Hellman의 치령ⅢA 이후의 부정교합을 가진 남ㆍ녀 97명을 Angle씨 각급 부정교합의 분류에 의해 중심교합위와 안정위시의 두부 X선 사진을 가각 탐득하고 Hyoid bone의 위치변화를 측정하여 다름과 같이 결과를 얻었다. 1. 중심교합위에서의 Cranial base에 대한 Hyoid bone 위치변화에서는 Angle씨 ClassⅢ에서 남ㆍ녀 모두 물징적으로 전방에 위치하며, Mandibular plane에 대한 Hyoid bone위치변화에서는 각급 부정교합사이에 특기할 차이가 없다. 2. 안정위에서의 Hyoid bone위치는 중심교합위에서의 위치와 비슷한 분포를 나타내고 있다. 3. 중심교합위에서는 안정위로싀 위치변화에서 각급 부정교합 똑같이 후ㆍ하방 이동을 나타내고 있다.