• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.188-188
• /
• 2004

Modal testing and analysis is a primary tool for obtaining reliable models to represent the dynamics of structures. When a structure is tested in order to collect measured data in modal testing, we usually use attached accelerometers to pick up the response data. Change in modal parameters due to the mass of transducers in modal testing is a well-known problem. The disadvantages are the shift of measured modal frequencies and the change of modal shapes, which can cause inaccurate results in further analysis. Modal analysis methods in frequency domain are based on a set of measured frequency response functions(FRF).(omitted)

• Steel and Composite Structures
• /
• 제27권6호
• /
• pp.761-775
• /
• 2018

In the present work, the recently developed non-polynomial shear deformation theories are assessed for thermo-mechanical response characteristics of laminated composite plates. The applicability and accuracy of these theories for static, buckling and free vibration responses were ascertained in the recent past by several authors. However, the assessment of these theories for thermo-mechanical analysis of the laminated composite structures is still to be ascertained. The response characteristics are investigated in linear and non-linear thermal gradient and also in the presence and absence of mechanical transverse loads. The laminated composite plates are modelled using recently developed six shear deformation theories involving different shear strain functions. The principle of virtual work is used to develop the governing system of equations. The Navier type closed form solution is adopted to yield the exact solution of the developed equation for simply supported cross ply laminated plates. The thermo-mechanical response characteristics due to these six different theories are obtained and compared with the existing results.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.245-256
• /
• 2002

Two-dimensional formulations for wind forces on elongated bodies, such as bridge decks, are reviewed and links with expressions found in two-dimensional airfoil theory are pointed out. The present research focus on indicial lift responses and admittance functions which are commonly used to improve buffeting analysis of bluff bodies. A computational fluid dynamic (CFD) analysis is used to derive these aerodynamic functions for various sections. The numerical procedure is presented and results are discussed which demonstrate that the particular shapes of these functions are strongly dependent on the evolution of the separated flows around the sections at the early stages.

• 한국지진공학회논문집
• /
• 제9권3호
• /
• pp.1-8
• /
• 2005

본 연구는 지진으로 인하여 발생한 건물의 피해액을 보다 객관적으로 예측 평가할 수 있는 ACM(Advanced Component Method) 개발 방법에 관한 것이다. ACM은 지금까지의 재래식 손실 평가방법에 사용된 구조 기술자들의 주관적인 관점과 전문가적 견해에서 탈피하여, 지진의 크기에 따른 구조형식이 각기 다른 건물들의 내진 성글 평가 기술에 바탕을 둔 지진 손실 평가 방법이다. 그 과정을 살펴보면 먼저 선별된 전형적인 건축 구조물에 대하여 비선형 정적 내진 해석인 pushover 해석을 실행하여 그들의 건물 능력도와 각 부재의 비선형 응답을 계산한다. 지진하중은 ADRS(Acceleration-Displacement Response Spectrum)의 응답 가속도와 응답 변위의 형태로 표현하여 이를 건물 능력도와 함께 능력 스펙트럼법(Capacity Spectrum Method) 기법을 이용하여 건물의 내진 성능점을 찾는다. 또한 전체 건물을 주요 구조체인 기둥, 보, 슬래브 등과 비구조체인 비내력 벽판, 외벽 장식용 요소 등을 각각 분리하여 건물 각 부재들의 지진 응답 변위에 따른 피해율을 산출한다. 이들 각 부재들의 피해는 그 부재들의 특성에 따른 적절한 보수보강기법과 그에 따른 비용산정 모델을 이용하여 각 부재의 금전적인 피해액으로 전환한다. 마지막으로 Monte Carlo기법을 이용하여 지금까지 얻은 건물의 응답과 각 부재들의 지진에 따른 피해율, 그리고 그 부재들의 비용산정 모델을 종합하여 전체 건물의 최종의 피해율을 얻는다. 특히, 현존하는 건물에 사용된 재료와 설계 가정 하중의 가변성에 따른 건물 거동에 대한 불확실성 등을 고려하기 위하여 Latin Hypercube 추출 기법을 사용하며, 마지막으로 본 연구의 사례평가를 위하여 과거 일어났던 지진 피해정보와 손실 자료들을 바탕으로 ACM방법과 재래식 방법을 이용한 건물 손실 평가 방법을 비교 분석하였다.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1181-1186
• /
• 2017

The purpose of Demand Response is to reduce the cost of excessive resources and equipment by spontaneous load reductions at peak loads. Having enough power consumers participating in these schemes is key to achieving the goal. Demand Response Aggregator (DRA) is responsible for recruiting demand resources and managing them to participate in reducing the load. DRAs change the price elasticity of demand functions by providing incentives to demand response, thereby affecting price formation in the electricity market. In this paper, this process is modeled to analyze the relationship between DRA's strategic bidding and market outcomes and load reductions. It analyzes the results by applying to competition between DRAs, competition between DR and Gencos, and coexistence of DR load and non-DR load. It is noteworthy that we have found a phenomenon called the Balloon Effect.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.453-463
• /
• 2017

This paper discusses the measurement of frequency response functions for various dc-dc converters. The frequency domain identification procedure is applied to the measured frequency responses. The identified transfer functions are primarily used in developing behavioral models for dc-dc converters. Distributed power systems are based upon such converters in cascade, parallel and several other configurations. The system level analysis of a complete system becomes complex when the identified transfer functions are of high order. Therefore, a certain technique needs to be applied for order reduction of the identified transfer functions. During the process of order reduction, it has to be ensured that the system retains the dynamics of the full order system. The technique used here is based on the Hankel singular values of a system. A systematic procedure is given to retain the maximum energy states for the reduced order model. A dynamic analysis is performed for behavioral models based on full and reduced order frequency responses. The close agreement of results validates the effectiveness of the model order reduction. Stability is the key design objective for any system designer. Therefore, the measured frequency responses at the interface of the source and load are also used to predict stability of the system.

• 한국추진공학회지
• /
• 제23권6호
• /
• pp.59-71
• /
• 2019

고체 로켓용 삭마성 내열 시스템의 수치 해석은 1960년대부터 다양한 In-house 코드로 수행되어 왔으나 Fluent, Marc, ABAQUS 등 상용코드에 서브루틴, UDF 등을 추가하여 해석 범위를 확장함으로써 상용코드의 활용 범위가 넓어지고 있다. 또한 예전에는 내열 시스템의 유동, 열반응과 구조해석을 각각 수행하였으나 근래에는 이들을 서로 연동하여 해석하는 연구들이 진행되고 있다. 본 논문에서는 내열재의 열반응 특성, 열반응 해석용 In-house 코드 그리고 상용코드로 내열 시스템의 유동, 열반응과 구조 해석을 수행한 연구동향을 고찰하였다.

• 한국군사과학기술학회지
• /
• 제26권3호
• /
• pp.205-213
• /
• 2023

An optimal design of a simple beam-shaped flexure hinge mount supporting an optical mirror is presented. An optical mirror assembly is an opto-mechanically coupled system as the optical and mechanical behaviors interact. This side-supporting mount is flexible in the radial direction and rigid for the remaining degrees of freedom to support the mirror without transferring thermal load. Through thermo-elastic, optical and eigenvalue analysis, opto-mechanical performance was predicted to establish the objective functions for optimization. The key design parameters for this flexure are the thickness and length. To find the optimal values of design parameters, response surface analysis was performed using the design of experiment based on nested FCD. Optimal design candidates were derived from the response surface analysis, and the optimal design shape was confirmed through Opto-mechanical performance validation analysis.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1960-1965
• /
• 2001

In the practical design, it is important to extract the design space information of a complex system in order to optimize the design because the design contains huge amount of design conflicts in general. In this research FEA (finite element analysis) has been successfully implemented and integrated with a statistical approach such as DOE (design of experiments) based RSM (response surface model) to optimize the thermal deformation of an automotive disk brake. The DOE is used for exploring the engineer's design space and for building the RSM in order to facilitate the effective solution of multi-objective optimization problems. The RSM is utilized as an efficient means to rapidly model the trade-off among many conflicting goals existed in the FEA applications. To reduce the computational burden associated with the FEA, the second-order regression models are generated to derive the objective functions and constraints. In this approach, the multiple objective functions and constraints represented by RSM are solved using the sequential quadratic programming to archive the optimal design of disk brake.

• Communications for Statistical Applications and Methods
• /
• 제17권1호
• /
• pp.127-140
• /
• 2010

본 논문에서는 중간분석에서 사용되는 집단축차 검정법으로 이산형 반응변수인 경우, 오류 분배율 함수를 적용한 집단축차 검정법을 제안한다. 특히 제 1종 오류와 제 2종 오류를 모두 적용한 집단축차 검정법을 제안하며, 기존의 오류 분배율 함수를 포함하는 새로운 오류 분배율 함수를 제안한다. 반응변수가 이산형인 경우 정확한 크기 ${\alpha}$ 검정을 할 수 없으므로 각 검정단계에 사용될 오류율을 분배하는 대신 각 검정단계까지 사용되어야 할 누적 오류율을 이용한다. 오류 분배율 함수를 적용한 집단축차 검정은 기존의 집단축차 검정 보다 빠른 연산과 유연한 검정이 가능하다는 장점을 지니고 있으며, 본 논문에서 제시된 오류 분배율 함수를 이용해 특성을 비교한다.