• 한국포장학회지
• /
• 제13권1호
• /
• pp.19-23
• /
• 2007

Shock and vibration inputs are transmitted from the transporting vehicle through the packaging to the fruit. The vibration causes sustained bouncing of fruits against each other and the container wall. The steady state vibration input may cause serous fruit injury, and the damage is particularly severe if the fruits are bounced at its resonance frequency. The determination of the resonance frequencies of the fruits and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruits, and to understand the complex interaction between the components of the fruits when they relate to expected transportation vibration inputs. To analyze the vibration properties of the apples for optimum packaging design during transportation, random vibration tests were carried out. In the random vibration test, the resonance frequency and PSD of the packaged freight of apples in the test were in the range of 82 to 97 Hz and 0.0013 to $0.0021G^2/Hz$ respectively and the resonance frequency and PSD of the packaged apples in the test were in the range of 13 to 71 Hz and 0.0143 to $0.0923G^2/Hz$.

• 한국해양공학회지
• /
• 제33권1호
• /
• pp.50-60
• /
• 2019

Recently, problems with excessive vibration of the radar masts of large bulk carriers and crude oil tankers have frequently been reported. This paper explores a design method to avoid the resonance of a radar mast installed on a large ship using various design of experiment (DOE) methods. A local vibration test was performed during an actual sea trial to determine the excitation sources of the vibration related to the resonant frequency of the radar mast. DOE methods such as the orthogonal array (OA) and Latin hypercube design (LHD) methods were used to analyze the Pareto effects on the radar mast vibration. In these DOE methods, the main vibration performances such as the natural frequency and weight of the radar mast were set as responses, while the shape and thickness of the main structural members of the radar mast were set as design factors. From the DOE-based Pareto effect results, we selected the significant structural members with the greatest influence on the vibration characteristics of the radar mast. Full factorial design (FFD) was applied to verify the Pareto effect results of the OA and LHD methods. The design of the main structural members of the radar mast to avoid resonance was reviewed, and a normal mode analysis was performed for each design using the finite element method. Based on the results of this normal mode analysis, we selected a design case that could avoid the resonance from the major excitation sources. In addition, a modal test was performed on the determined design to verify the normal mode analysis results.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3296-3301
• /
• 2011

배수성포장은 다양한 장점을 가지고 있어 점차 보편화되고 있는데, 주요 효과로는 수막현상 최소화, 빗물에 의한 미끄럼저항값을 일정하게 유지하고, 차량과 포장체 사이에서 발생하는 소음을 저감시켜준다. 도로소음 및 수막현상 감소효과에 대한 많은 연구가 수행되었다. 본 연구의 목적은 배수성 포장 표층의 역학적 특성(강도 및 탄성계수)을 평가하는 것이다. 시험에 사용된 시편은 선회다짐기를 이용하여 제작하였다. 배수성포장의 상부표층 및 하부표층용 시편을 실험에 이용하였다. 마샬안정도시험(KS F 2377), 자유단공진주시험(KS F 2730), 일축압축시험(KS F 2314), 슈미트햄머시험 등을 수행하였다. 일축압축강도 및 슈미트햄머를 이용한 강도값을 비교 분석하였다.

• 항공우주시스템공학회지
• /
• 제4권2호
• /
• pp.21-25
• /
• 2010

Fatigue properties of composite materials are extremely important to design durable and reliable helicopter rotor blades. However, it is very difficult to apply conventional fatigue test loads in short period. Therefore, accelerating test speed and facilitating spectrum load realization are required. In this study, we have developed a fatigue testing method that uses a resonance of simply supported beam type blade specimen. This test consists in exciting the blade specimen with a frequency that corresponds to its natural frequency. In that case, the test specimen similar to a beam fixed between two pivot points starts vibrating and is significantly deformed. Resonant fatigue tests were performed by changing exciting vertical amplitude and frequency, and S-N curves of each composite materials were successfully obtained.

• 항공우주기술
• /
• 제9권2호
• /
• pp.1-7
• /
• 2010

Fatigue properties of composite materials are extremely important to design durable and reliable helicopter rotor blades. However, it is very difficult to apply conventional fatigue test loads in short period. Therefore, accelerating test speed and facilitating spectrum load realization are required. In this study, we have developed a fatigue testing method that uses a resonance of simply supported beam type blade specimen. This test consists in exciting the blade specimen with a frequency that corresponds to its natural frequency. In that case, the test specimen similar to a beam fixed between two pivot points starts vibrating and is significantly deformed. Resonant fatigue tests were performed by changing exciting vertical amplitude and frequency, and S-N curves of each composite materials were successfully obtained.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.234-237
• /
• 2017

This study is aimed to optimize a location of region of interest (ROI) in test bolus carotid contrast enhanced magnetic resonance angiography (CE-MRA) at 3.0T. A total of consecutive 270 patients with no cardiovascular and vessel diseases were selected. Patients underwent elliptical centric 3D CE-MRA with the test bolus technique to identify the individual arterial arrival time. Quantitative measurements were performed by drawing ROIs of $25mm^2$ and signal intensities (SI) were measured in the center of common carotid artery (CCA), internal carotid artery (ICA) and aortic arch (AA). As a result, ROIs located within AA showed a significantly clarified arterial peak and over three times increased SI, while no significant arterial peak time differences were observed compared to ROIs located within CCA. In conclusion, it was demonstrated that the aortic arch is the optimal position to locate ROI in test bolus images of the carotid CE-MRA.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.149-152
• /
• 1986

Vibration characteristics of harmonic drives and cyclo drives are reviewed. Both of two have two resonance frequencies inherently. Especially, the amplitudes of cyclo drives are over 1.0g. The test of the robot also shows large amplitude of vibration in the speed which is coincide with the resonance frequencies of reducers.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.389-393
• /
• 2014

This paper presents one of the methods for design to reduce the noise and vibration of 200kW motor for electric propulsion ship. One of the important factors affecting vibration of the motor is the resonance. The natural frequency and natural mode of the 200kW motor is analyzed by using FEM tool and impact test equipment to avoid the resonance. Also, compare FEM result with impact test result to make a reliable FE model of 200kW motor. In order to find out the effect of the noise and vibration of the motor by electromagnetic excitation force, conduct electromagnetic-structure coupled analysis. These characteristics are much useful to design 200kW motor for electric propulsion ship.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1439-1447
• /
• 1994

Test results of friction-factor for the flow of air in a narrow channel lined with various honeycomb geometries show that, generally, the friction-factor is nearly constant or slightly decreases as the Reynolds number(or Mach number) increases, a characteristic common to turbulent flow in pipes. However, in some test geometries this trend is remarkably different. The friction factor dramatically drops and then rises as the Mach number increases. This phenomenon can be characterized as a "friction-factor jump." Further investigations of the acoustic spectrum indicate that the "friction-factor jump" phenomenon is accompanied by an onset of a normal mode resonance excited coherent flow fluctuation structure, which occurs at Reynolds number of the order of $10^4$. New empirical friction-factor model for "friction-factor jump" cases is developed as a function of Mach number and local pressure.ach number and local pressure.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 2001년도 종합학술발표회논문집
• /
• pp.43-47
• /
• 2001

본 논문은 신경망 이론중 하나인 Adaptive Resonance Theory(ART)을 사용하여 네트워크 상의 불법적인 침입을 탐지하는 기법에 대한 연구이다. ART는 비교사 학습을 하는 신경망으로써, 적응적인 학습능력이 있으며, 또 새로운 패턴에 대해서 새로운 클러스터를 생산하는 능력이 있다. ART의 이러한 특성을 이용하여, 여러 가지 침입패턴을 네트워크상에서 생산하여 학습을 시키고, 또 test 했으며, test 이후에도 on-line 상에서 새로운 공격 pattern도 찾아냄을 보였다. 따라서, 이미 알려진 침입뿐만 아니라 새롭게 발생하는 침입 기법에 대해서도 새로운 rule의 첨가 없이 적극적으로 대처할 수 있을 것으로 예측된다.