• Journal of Families and Better Life
• /
• v.30 no.2
• /
• pp.101-120
• /
• 2012

This research was conducted in order to find out the effects of boys' self-control, their parents' behaviors and marital conflict on boys' aggression. Subtypes of aggression in the present research consist of dimensions of the functions and forms (proactive-overt, proactive-relational, reactive-overt, reactive-relational). The participants of this study were 237 boys in the fifth and sixth grades in elementary schools located in Seoul and Gyeonggi province. The questionnaires were derived and modified from Lee Hong (2009) for boys' aggression, from Ju So Young and Lee Yang Hee (2008) for boys' self-control, from Jun Joo Ram (2008) and Heo Seung Yeon (2009) for maternal behaviors and from Kang Na Jung (2008) for marital conflict. In order to grasp the general characteristics of the participants, frequency and descriptive statistics were used. Also, Pearson's correlation was applied to the relationships amomg boys' self-control, marital behaviors and marital conflict on boys' aggression. Lastly, the variables that can predict boys' aggression were analyzed through multiple regression analysis by SPSS 19.0. The major results of this study were as follows. This research showed that this model fit well for boys. To summarize the important results, what is interesting in the present study is the effect of the mother's role in rearing their sons. It was found that mothers' criticism, negative behaviors, and excessive interference can cause boys' high level of aggressiveness. Also, having parents who fight frequently was strongly associated with boys' relational aggression. An interesting finding is that the mother's support influenced boys' reactive-overt aggression. Lastly, boys' self-control was highly associated with boys' proactive-relational aggression. This research may contribute to understanding boys' aggression' subtypes. To that end, the current results suggest that the dimensions of the functions and forms may be a useful tool in an effort to inform developmental theory and intervention. Also, this research may provide guidance for the resolution of problems caused by boys' aggression. Lastly, it was found that self- control training and parental education programs might prove beneficial for helping aggressive boys to overcome their aggressive impulses.

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.567-573
• /
• 2007

Tidal channel development is influenced by sediment type, grain size, composition and tidal current. Tidal channels are usually characterized by channel formation, density and shape. Quantitative analysis of tidal channels using remotely sensed data have rarely been studied. The objective of this study is to quantify tidal channels in terms of fractal dimension and compare different inter-tidal channel patterns and compare with DEM (Digital Elevation Model). For the fractal analysis, we used box counting method which had been successfully applied to streams, coastlines and others linear features. For a study, the southern part of Ganghwado tidal flats was selected which know for high dynamics of tidal currents and vast tidal flats. This area has different widths and lengths of tidal channels. IKONOS was used for extracting tidal channels, and the box counting method was applied to obtain fractal dimensions (D) for each tidal channel. Yeochari area where channels showed less dense development and low DEM had low fractal dimenwion near $1.00{\sim}1.20$. Area (near Donggumdo and Yeongjongdo) of dendritic channel pattern and high DEM resulted in high fractal dimension near $1.20{\sim}1.35$. The difference of fractal dimensions according to channel development in tidal flats is relatively large enough to use as an index for tidal channel classification. Therefore we could conclude that fractal dimension, channel development and DEM in tidal channel has high correlation. Using fractal dimension, channel development and DEM, it would be possible to quantify the tidal channel development in association with surface characteristics.

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.327-333
• /
• 2020

Performance of a portable GC that can be utilized for the real time determination of volatile organic compounds in air was evaluated. It employs purified/compressed ambient air as the carrier gas eliminating the need for high pressure gas tanks. The compact system with dimensions of 35 × 26 × 15 ㎤ and weight of 5 kg is powered by either a 24 V DC external adapter or battery pack. Chromatograms of the mixture sample including benzene, toluene, ethylbenzene, and oxylene at concentrations of 1 ppmv and 20 ppmv represent a good reproducibility: 3.79% and 0.48% relative standard deviations (RSDs) for peak area variations; 0.40% and 0.08% RSDs for retention times. The method detection limit was 0.09 ppmv. A 30 m long, 0.28 mm I.D. column operated at an optimal condition yielded a peak capacity of 61 with good resolution for a 10 min isothermal analysis. The relative standard deviations (RSD) of the peak area variations and retention times during consecutive measurements over 27 h were less than 2.4%RSD and 0.5%RSD, respectively. Thus, this instrument makes it suitable for continuous and field analysis of low-concentration VOC mixtures in the indoor/outdoor environment as well as the spillage accident of hazardous chemicals.

• Journal of Arbitration Studies
• /
• v.31 no.2
• /
• pp.3-22
• /
• 2021

Civil and commercial disputes can be resolved through alternative dispute settlement systems other than court proceedings. Among them, the arbitration procedure is a system that is clearly distinguished from the mediation procedure in which the dispute is terminated by agreement between the parties. The arbitration proceedings shall have the same effect as the result of the final judgment by the decision of a third-party arbitrator, and its essence is a judgment. The Korean Arbitration Association Studies was founded in December 1990 to recognize the importance of arbitration procedures and conduct specialized research on them, with professional research on 'arbitration procedures' continuing until today. Thus, the Korean Arbitration Association Studies is positioned as the only specialized research organization in the field of arbitration. In the case of the Korean Arbitration Association Studies, which is the only society in Korea related to arbitration and alternative dispute resolution, the members are mainly scholars majoring in trade and commerce and ones majoring in law. This situation reflects the distinctive character of the arbitration system because it is a matter of dispute procedures related to trade and commerce and many scholars who research trade and commerce need to prepare for possible disputes. In addition, the arbitration procedure is a dispute settlement procedure that substitutes for litigation because it has research value as a legal system. In particular, the 'Journal of Arbitration Studies' published by the Korean Arbitration Association plays a role in mediation, as well as mediation and presentation of research papers in the ADR field. This study analyzes the trends of mediation and ADR-related papers published in 'Journal of Arbitration Studies', an academic journal of the Korean Arbitration Association Studies, in four dimensions, celebrating the 30th anniversary of the Korean Arbitration Association Studies. First, this study examined which sub-themes are mainly studied among the various viewpoints of mediation through thematic analysis. Second, it looked at what methodology was used to study intervention at the methodological level. Third, it assessed what countries and regions had been mainly studied at the regional level. Fourth, in terms of content, what kind of research had been mainly conducted and what kind of research was relatively insufficient was investigated, analyzing the research results of the last 30 years and presenting a milestone for the research direction of 'Journal of Arbitration Studies' in the future.

• Molecules and Cells
• /
• v.20 no.1
• /
• pp.1-16
• /
• 2005

The peptidyl transferase center (PTC) is located in a protein free environment, thus confirming that the ribosome is a ribozyme. This arched void has dimensions suitable for accommodating the 3'ends of the A-and the P-site tRNAs, and is situated within a universal sizable symmetry-related region that connects all ribosomal functional centers involved in amino-acid polymerization. The linkage between the elaborate PTC architecture and the A-site tRNA position revealed that the A-to P-site passage of the tRNA 3'end is performed by a rotatory motion, which leads to stereochemistry suitable for peptide bond formation and for substrate mediated catalysis, thus suggesting that the PTC evolved by genefusion. Adjacent to the PTC is the entrance of the protein exit tunnel, shown to play active roles in sequence-specific gating of nascent chains and in responding to cellular signals. This tunnel also provides a site that may be exploited for local co-translational folding and seems to assist in nascent chain trafficking into the hydrophobic space formed by the first bacterial chaperone, the trigger factor. Many antibiotics target ribosomes. Although the ribosome is highly conserved, subtle sequence and/or conformational variations enable drug selectivity, thus facilitating clinical usage. Comparisons of high-resolution structures of complexes of antibiotics bound to ribosomes from eubacteria resembling pathogens, to an archaeon that shares properties with eukaryotes and to its mutant that allows antibiotics binding, demonstrated the unambiguous difference between mere binding and therapeutical effectiveness. The observed variability in antibiotics inhibitory modes, accompanied by the elucidation of the structural basis to antibiotics mechanism justifies expectations for structural based improved properties of existing compounds as well as for the development of novel drugs.

• The Journal of Korea Robotics Society
• /
• v.12 no.3
• /
• pp.350-355
• /
• 2017

UWB (Ultra Wide Band) refers to a system with a bandwidth of over 500 MHz or a bandwidth of 20% of the center frequency. It is robust against channel fading and has a wide signal bandwidth. Using the IR-UWB based ranging system, it is possible to obtain decimeter-level ranging accuracy. Furthermore, IR-UWB system enables acquisition over glass or cement with high resolution. In recent years, IR-UWB-based ranging chipsets have become cheap and popular, and it has become possible to implement positioning systems of several tens of centimeters. The system can be configured as one-way ranging (OWR) positioning system for fast ranging and TWR (two-way ranging) positioning system for cheap and robust ranging. On the other hand, the ranging based positioning system has a limitation on the number of terminals for localization because it takes time to perform a communication procedure to perform ranging. To overcome this problem, code multiplexing and channel multiplexing are performed. However, errors occur in measurement due to interference between channels and code, multipath, and so on. The measurement filtering is used to reduce the measurement error, but more fundamentally, techniques for removing these measurements should be studied. First, the TWR based positioning was analyzed from a stochastic point of view and the effects of outlier measurements were summarized. The positioning algorithm for analytically identifying and removing single outlier is summarized and extended to three dimensions. Through the simulation, we have verified the algorithm to detect and remove single outliers.

• The korean journal of orthodontics
• /
• v.50 no.6
• /
• pp.401-406
• /
• 2020

Objective: To investigate and compare the slot sizes and parallelism of metal injection molding (MIM) and computerized numerical control (CNC) brackets. Methods: The following four MIM bracket series with 0.022-inch (in) slots were selected for investigation: Di MIM mini Twin (Ortho Organizers), Mini Diamond Roth (Ormco), Gemini MBT (3M Unitek), and Formula R Roth (Tomy). The following four CNC bracket series with 0.022-in slots were selected for investigation: Econoline MBT (Adenta), Legend mini MBT (GC Orthodontics), Crown mini MBT (Adenta), and Evolve MBT (DB Orthodontics). The slot dimensions were measured using an optical microscope (XTCam-D310M; Mitutoyo) with a resolution of 1 ㎛. The results were statistically analyzed using one-way analysis of variance and the Tukey post-hoc test with a significance level of 0.05. Results: The results indicated that all the investigated slot sizes were oversized with respect to the manufacturers' specifications (0.022 in). Among the eight bracket series, the Di MIM bracket (MIM) was the most oversized by 10.4%, whereas the Evolve bracket (CNC) was the least oversized by 2.6%. The slots in seven of the bracket series had divergent walls instead of parallel ones. The Evolve bracket alone had parallel slot walls. Conclusions: Regardless of the manufacturing method, all the slot sizes of the brackets investigated in this study were significantly oversized; most of the slot walls were nonparallel, except for those of the Evolve bracket. This study could not establish that the CNC method was more accurate than the MIM method in manufacturing bracket slots.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.121-128
• /
• 2006

Magnetic survey flights by helicopters are usually parallel to the topographic surface, with a nominal clearance, but especially in high-resolution surveys the altitudes at which observations are made may be too variable to be regarded as a smooth surface. We have developed a reduction procedure for such data using the method of equivalent sources, where surrounding sources are included to control edge effects, and data from points distributed randomly in three dimensions are directly modelled. Although the problem is generally underdetermined, the method of conjugate gradients can be used to find a minimum-norm solution. There is freedom to select the harmonic function that relates the magnetic anomaly with the source. When the upward continuation function operator is selected, the equivalent source is the magnetic anomaly itself. If we select as source a distribution of magnetic dipoles in the direction of the ambient magnetic field, we can easily derive reduction-to-pole anomalies by rotating the direction of the magnetic dipoles to vertical.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.1
• /
• pp.137-146
• /
• 2009

Researches on after-sales quality have centered on home electric appliances, figuring out how factors influencing after-sales service quality are causally related to customer's behavioral intentions, via consumer satisfaction as an intermediary parameter In most cases of after-sales service in home electric appliances, upon customer's request, service agents make a visit to where the appliance is installed, and check the product and do repairs. However, in case of a small portable device such as a cell phone, which people carry around at all times, most of the times customers themselves show up at the after-sales center, and demand a check-up and repairs. The main difference here is that the after-sales services are provided when a product can no longer perform its basic function and customer dissatisfaction is already up. In this case, the basic function of a product corresponds to must-be factor according to Kano model. The goal of our research is to identify critical factors for effective and efficient after-sales service, and how to monitor them on a routine basis. In our research, the quality after-sales service consists of three dimensions, interactive quality, result quality, and physical environment quality. We set up variables for each dimension, which would measure from customer's perspective key determining factors in service delivery process. Instead of focusing on customer satisfaction aspect, we focused on how after-sales service factors contribute to addressing customer complaints. Additionally, our future research would aim to verify how customer's behavioral intentions are affected, as the resolution of consumer complaints becomes more successful when adjustment of relevant quality factors improves after-sales service quality.

• Journal of Sensor Science and Technology
• /
• v.13 no.2
• /
• pp.101-109
• /
• 2004

This paper presents a novel z-axis accelerometer with perfectly aligned vertical combs fabricated using the extended sacrificial bulk micromachining (extended SBM) process. The z-axis accelerometer is fabricated using only one (111) SOI wafer and two photo masks without wafer bonding or CMP processes as used by other research efforts that involve vertical combs. In our process, there is no misalignment in lateral gap between the upper and lower comb electrodes, because all critical dimensions including lateral gaps are defined using only one mask. The fabricated accelerometer has the structure thickness of $30{\mu}m$, the vertical offset of $12{\mu}m$, and lateral gap between electrodes of $4{\mu}m$. Torsional springs and asymmetric proof mass produce a vertical displacement when an external z-axis acceleration is applied, and capacitance change due to the vertical displacement of the comb is detected by charge-to-voltage converter. The signal-to-noise ratio of the modulated and demodulated output signal is 80 dB and 76.5 dB, respectively. The noise equivalent input acceleration resolution of the modulated and demodulated output signal is calculated to be $500{\mu}g$ and $748{\mu}g$. The scale factor and linearity of the accelerometer are measured to be 1.1 mV/g and 1.18% FSO, respectively.