• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.101-108
• /
• 2011

Construction of the Jangbogo antarctic station was planned, and it requires detailed information on topography of the area around the station. The purpose of this research is to generate the topographic map to construct the Jangbogo antarctic station using the satellite image. To do this, surveying and pre-test of equipment were conducted. In addition, for sensor modeling of the GeoEye-1 satellite image, RPC-bias correction was done, and it showed that at least two control points are required. In generating the map, a 1/2,500 scale was deemed suitable in consideration of resolution of the image and the fact that supplementary topographic surveying would be impossible. In order to provide detailed information on the topography around the Jangbogo station, the digital elevation model based on image matching was created, and compared with GPS-RTK data, accuracy of vertical location about 0.6m was exhibited.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.457-466
• /
• 2007

The effect of depth correction in the coastal sea has been investigated through a series of tide simulations in the area of $115{\sim}150^{\circ}E,\;20{\sim}52^{\circ}N$ of northwestern Pacific with $1/12^{\circ}$ resolution. Comparison of the solutions varying the minimum depth from 10m to 35 m with the 5m interval shows that the amplitude accuracies of $M_2,\;S_2,\;K_1$ tide using the minimum depth of 25 m have been improved up to 42%, 32%, 26%, respectively, comparing to those using the minimum depth of 10m. The discrepancy between model results using different minimum depth is found to be up to 20 cm for $M_2$ tidal amplitude around Cheju Islands and the positions of amphidromes are dramatically changed in the Bohai Sea. The calculated ARE(Averaged Relative Error) values have been minimized when the bottom frictional coefficient and the minimum depth is 0.0015 and 25 m, respectively.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.164-169
• /
• 2008

한국해양연구원에서 수신한 자료인 NOAA 12, 16, 17, 18호등의 Advanced Very High Resolution Radiometer(AVHRR) 센서자료와 국립조사원에서 제공하는 해양실측자료인 정선 관측 자료를 이용하여 두 가지의 알고리즘 적용을 통하여 비교 및 분석을 해보고자 한다. 연구 기간은 2006년 1월부터 4월 자료 중 구름의 영향이 없는 영상에서 실측자료와 동일한 날짜 총 107개의 정점 값을 추출하였다. 위성 자료에서 해수면 온도 추출방법은 split window 방법으로, 고정계수 값을 사용하는 linear algorithm(MCSST), nonlinear algorithm(NLMCSST)을 이용하였다. 연구 지역은 동해, 황해, 남해 지역에 대한 지역별로 두 알고리즘을 비교 적용하였다. 전 해역의 값을 이용하여 위성자료와 실측자료를 비교 분석한 결과 linear algorithm방법의 평균 오차 값은 0.71$^{\circ}C$이고 상관도는 1%이고, nonlinear 방법의 오차 값은 0.35$^{\circ}C$ 상관도는 1%로 나타났다. 해역별로는 linear한 알고리즘을 적용하여 동해는(ES)는 R=1, 오차 값은 0.37$^{\circ}C$ 황해(YS)는 R=0.99 오차 값은 0.125$^{\circ}C$ 남해(SS)는 R=0.99 오차 값은 1.2$^{\circ}C$보였다. nonlinear한 알고리즘을 적용하여 동해는(ES)는 R=1, 오차 값은 0.4$^{\circ}C$ 황해(YS)는 R=0.99 오차 값은 0.13$^{\circ}C$ 남해(SS)는 R=0.99 오차 값은 0.82$^{\circ}C$의 결과를 보여 주었다. 동해와 황해지역은 linear한 알고리즘을 적용한 결과가 실측자료와의 오차 값이 작았고, 남해지역은 linear한 알고리즘을 적용한 결과보다 nonlinear 알고리즘을 적용한 것이 작은 오차 값을 보여주었다. 이는 남해 해역의 자료가 대기의 상태나 다른 영향을 받아 해수면온도 값이 추정된 것으로 보여 진다. 해역별로 최적화된 알고리즘을 적용하여 해수면온도의 산출을 통해서 위성자료의 정밀도 지구환경변화 모니터링 등 많은 연구에 위성자료의 활용이 증대될 것으로 기대한다.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.123-130
• /
• 2007

The aim of this study was to propose a fusion and registration method with heterogeneous small animal acquisition system in small animal in-vivo study. After an intravenous injection of $^{18}F$-FDG through tail vain and 60 min delay for uptake, mouse was placed on an acryl plate with fiducial markers that were made for fusion between small animal PET (microPET R4, Concorde Microsystems, Knoxville TN) and Discovery LS CT images. The acquired emission list-mode data was sorted to temporally framed sinograms and reconstructed using FORE rebining and 2D-OSEM algorithms without correction of attenuation and scatter. After PET imaging, CT images were acquired by mean of a clinical PET/CT with high-resolution mode. The microPET and CT images were fusion and co-registered using the fiducial markers and segmented lung region in both data sets to perform a point-based rigid co-registration. This method improves the quantitative accuracy and interpretation of the tracer.

• Archives of Plastic Surgery
• /
• v.47 no.2
• /
• pp.171-177
• /
• 2020

Background Infrabrow blepharoplasty has become a common surgical method used to rejuvenate aged upper eyelids in Asians. In this paper, we describe the parallel excision method for infrabrow blepharoplasty as a useful alternative to the conventional elliptical excision method. The authors' experience over a 3-year period is presented and reviewed. Methods A retrospective review of parallel excision infrabrow blepharoplasty cases at our hospital between 2014 and 2017 was performed. Three oculoplastic surgeons compared preoperative and postoperative photographs using the Strasser grading system. Results From the medical records of 123 patients, a total of 93 patients with moderate-to-severe bilateral dermatochalasis were selected as subjects. The exclusion criterion was levator function less than 8 mm. The total mean follow-up period was 2 years (range, 0.5-3.5 years). The mean skin excision height and width were 9.75 mm (range, 5-16 mm) and 58.51 mm (range, 42-75 mm), respectively. All patients who underwent surgery recovered without major complications, and all patients had high levels of satisfaction and improvements in their visual field. In the Strasser evaluation performed by the oculoplastic surgeons, most patients were found to have excellent results. Conclusions The parallel excision method for infrabrow blepharoplasty is a safe and effective technique that yields more natural- and youthful-looking eyelids than the conventional elliptical excision method. In our method, more effective manipulation of the orbicularis oculi muscle led to a reduction in frontalis compensation, resolution of sunken eyelids, and correction of lateral hooding.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.4
• /
• pp.1-10
• /
• 2000

Satellite remote sensing images have much more information compared to a paper map. But these images are generally handled as particular image format gained from optical sensor, and must be processed and analyzed by computer with high priced digital image processing system. For the extraction of digital elevation model(DEM) from satellite image, we used the overlay image by SPOT-3 of Chuncheon area at the Kangwon province. According to the image condition, the precious geometric correction, the bundle adjustment for ortho-image generation and the stereo image mapping by several technical approaches were processed. So that we developed the methods of automatic DEM extraction and efficient stereo image map generation which can improve the digital image processing steps. Also, we applied the multiple direction birdeye view image for modeling and analysis using the remotely sensed overlay images with high resolution.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1135-1139
• /
• 2017

Spatial distribution of chemical species in flame is a important indicator understanding the flame structure and combustion characteristics, and optical emission spectroscopy has been widely used for the measurement because of its simple and non-intrusive methodology. In this study, we suggest the feasibility of the measurement of chemical species (OH radical) distribution in rocket plume using optical emission spectrometer which was developed for the spatially resolved measurement along the line-of-sight. In order to predict the ground state concentration of species from the measured emission intensity by optical emission spectrometer, we consider thermal and chemical excitation mechanisms in flame, and assume thermodynamic equilibrium for the thermally excited species. We also present the spatial resolution and the correction of collection characteristics of the optical emission spectrometer depending on object distance.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1197-1199
• /
• 2003

ROCSAT-2 mission is to daily image over Taiwan and the surrounding area for disaster monitoring, land use, and ocean surveillance during the 5-year mission lifetime. The satellite will be launched in December 2003 into its mission orbit, which is selected as a 14 rev/day repetitive Sun-synchronous orbit descending over (120 deg E, 24 deg N) and 9:45 a.m. over the equator with the minimum eccentricity. National Space Program Office (NSPO) is developing a ROCSAT-2 Image Processing System (IPS), which aims to provide real-time high quality image data for ROCSAT-2 mission. A simulated ROCSAT-2 image, based on Level 1B QuickBird Data, is generated for IPS verification. The test image is comprised of one panchromatic data and four multispectral data. The qualification process consists of four procedures: (a) QuickBird image processing, (b) generation of simulated ROCSAT-2 image in Generic Raw Level Data (GERALD) format, (c) ROCSAT-2 image processing, and (d) geometric error analysis. QuickBird standard photogrammetric parameters of a camera that models the imaging and optical system is used to calculate the latitude and longitude of each line and sample. The backward (inverse model) approach is applied to find the relationship between geodetic coordinate system (latitude, longitude) and image coordinate system (line, sample). The bilinear resampling method is used to generate the test image. Ground control points are used to evaluate the error for data processing. The data processing contains various coordinate system transformations using attitude quaternion and orbit elements. Through the qualification test process, it is verified that the IPS is capable of handling high-resolution image data with the accuracy of Level 2 processing within 500 m.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.158-158
• /
• 2012

기후시나리오는 시 공간 해상도가 낮아 결과를 직접적으로 활용하기에는 한계가 있다. 따라서 국내외적으로 지역기후모형(RCM)을 통해 고해상도 기후시나리오를 생산하여 각 분야의 영향평가 시 활용하고 있다. 그럼에도 불구하고 기후모형이 갖는 한계로 인하여 시나리오는 관측자료에 비해 과소모의되는 경향이 발생하기 때문에 이를 고려할 수 있는 편의보정 과정이 필요하다. 하지만 국내 외적으로 여러 편의보정기법이 존재하며, 편의보정기법 선정에 따라 최종 평가 결과에 영향을 미칠 수 있다. 특히 수문 분야에서 활용하기 위해 기후시나리오 중 가장 중요한 요건은 일단 관측치의 월 및 계절별 변동성이 잘 반영되는 가이며, 두 번째는 극한 사상(high, low)을 얼마나 잘 모의하여 홍수와 가뭄을 평가하는데 용이한 가이다. 따라서 본 연구에서는 기존 편의보정 기법의 불확실성을 평가하고, 이를 통해 수문학적 활용을 위한 고해상도 기후시나리오의 편의 보정 기법을 제안 및 적용성 평가를 수행하고자 한다. 기존 편의보정기법의 적용성을 평가하기 위해 Change factor method, Quantile mapping, Weather Generator 등을 이용하였다. 이를 위해 역학적으로 상세화된 기후시나리오와 기상청 관할의 기상관측소의 최고기온, 최저기온, 평균기온, 강수량 등의 기후 자료를 수집하였다. 평가를 위해 선정한 관측소 지점은 1951년부터 강수 및 기온 자료가 존재하는 기상청 관할 기상관측소를 토대로, 지역적인 평가를 위해 최종적으로 서울, 강릉, 대구, 부산, 목포, 광주, 전주, 울산, 추풍령을 선정하였다. 이 중 1956~1980년을 과거기간으로 1981~2005년를 미래기간으로 가정하고, 편의 보정 기법 적용하여 기온과 강수량의 통계적 특성을 비교 분석하였으며 평가결과, 편의보정 기법의 따른 한계점들을 도출하였다. 한계점들을 개선하기 위해 본 연구에서 제안한 편의 보정기법은 강수량을 크게 3단계(극한 호우사상, 강수일수, 평균 표준편차 보정)로 나누어 편의보정을 실시하는 것으로 극한 호우사상을 위해서는 연최대치 계열을 이용한 회귀식을 이용하여 보정하였고, 비초과확률을 이용하여 RCM 결과값의 강수일수를 보정하였다. 최종적으로 나머지 강수시나리오에 대해서 평균과 표준편차를 보정하여 최종시나리오를 생산 및 적용성을 평가하였다. 평가 결과, 기존 편의보정기법의 단점을 극복할 수 있었으며, 이를 통해 향후 수문학 분야에 적용하여 신뢰성 있는 기후변화 영향평가를 수행될 수 있을 것이다. 제안한 편의보정 기법 및 평가 결과에 대한 자세한 내용은 발표 시 제시하고자 한다.