• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2006년도 하계 학술대회 논문집
• /
• pp.25-28
• /
• 2006

In this paper, we say the shading correction system supporting multi-resolution for camera. The shading effect is caused by non-uniform illumination, non-uniform camera sensitivity, or even dirt and dust on glass (lens) surfaces. In general this shading effect is undesirable [1]. Eliminating it is frequently necessary for subsequent processing and especially when quantitative microscopy is the fine goal. The proposed system is available on thirty nine kinds of image resolutions scanned by interlaced and progressive type. Moreover, the system is using various continuous quadratic equations instead of using the piece-wise linear curve which is composed of multiple line segments. Finally, the system could correct the correct effect without discontinuity in any image resolution. The proposed system is also experimentally demonstrated with Xilinx Virtex FPGA XCV2000E- 6BG5560 and the TV set.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.901-907
• /
• 2000

As the minimum feature size for making ULSI approaches the wavelength of light source in optical lithography, the aerial image is so hardly distorted because of the optical proximity effect that the accurate mask image reconstruction on wafer surface is almost impossible. We applied the Optical Proximity Correction(OPC) on isolated patterns assuming Attenuated Phase Shift Mask(APSM) as well as binary mask, to correct the widening of isolated patterns. In this study, we found that applying OPC to APSM shows much better improvement not only in enhancing the resolution and fidelity of t도 images but also in enhancing the process margin than applying OPC to the binary mask. Also, we propose the OPC method of APSM for isolated patterns, the size of which is less than the wavelength of the ArF excimer laser. Finally, we predicted the resolution limit of optical lithography through the aerial image simulation.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.166-166
• /
• 2020

Recently, As the frequency of localized heavy rains increases, the use of high-resolution radar data is increasing. The produced radar rainfall has still gaps of spatial and temporal compared to gauge observation rainfall, and in many studies, various statistical techniques are performed for correct rainfall. In this study, the precipitation correction of the S-band Dual Polarization radar in use in the flood forecast was performed using the ConvAE algorithm, one of the Convolutional Neural Network. The ConvAE model was trained based on radar data sets having a 10-min temporal resolution: radar rainfall data, gauge rainfall data for 790minutes(July 2017 in Cheongju flood event). As a result of the validation of corrected radar rainfall were reduced gaps compared to gauge rainfall and the spatial correction was also performed. Therefore, it is judged that the corrected radar rainfall using ConvAE will increase the reliability of the gridded rainfall data used in various physically-based distributed hydrodynamic models.

• 핵의학기술
• /
• 제19권2호
• /
• pp.87-92
• /
• 2015

SPECT에서 Uniformity는 균일한 방사능을 갖는 선원에 대하여 균일한 영상을 제공하는 능력이다. 영상에서 다양한 이유로 불균일이 발생하게 되고, 불균일은 artifacts를 발생시켜 임상적으로 진단하는데 영향을 줄 수 있다. Uniformity correction map은 검사에 사용되는 방사성 동위원소를 이용하여 영상에서 Uniformity의 변동폭을 최소화 시켜주는 역할을 한다. 본원에서 시행되고 있는 $^{201}Tl$을 이용한 심근 SPECT에서는 $^{99m}Tc$으로 기본 설정되어 있는 Uniformity correction map을 사용하고 있으며, 이에 따라 본 연구에서는 $^{201}Tl$과 $^{99m}Tc$ 두 가지 핵종으로 Uniformity correction map을 각각 설정하였을 때 영상의 질에 차이가 있는지 비교 분석하고, 영상의 질을 최적화 할 수 있는 방법에 대하여 모색해 보고자 한다. 장비는 GE Ventri Gamma camera, Flood phantom, Jaszczak ECT phantom을 이용하였다. 실험에 앞서 Collimator를 제거한 상태에서 Detector 표면 중심으로부터 2.5 m 떨어진 지점에 1 cc 주사기에 $^{99m}Tc$ 25.9 Mbq, $^{201}Tl$ 14.8 Mbq의 방사성 동위원소를 주입한 point source를 이용하여 장비사에서 권고하는 $6{\times}10^7count$로 $^{99m}Tc$와 $^{201}Tl$ 각각의 방사성 동위원소로 Uniformity Mapping을 실시하였다. Flood phantom에는 $^{201}Tl$ 21.3 kBq/mL, Jaszczak ECT phantom에는 $^{201}Tl$ 33.4 kBq/mL를 주입하여 phantom을 제작하였다. Flood Phantom으로 획득된 데이터는 Xeleris ver 2.05 프로그램을 이용하여 Integral uniformity, Differential uniformity을 두 가지 항목에 대하여 분석하였다. Jaszczak ECT Phantom으로 획득된 데이터를 본원에서 자체 개발한 Interactive Data Language 프로그램에 입력하여 Integral uniformity, Contrast, Coefficient of variation, Spatial Resolution을 4가지 항목에 대하여 분석하였다. Flood phantom test 에서는 $^{99m}Tc$에서의 Flood I.U값은 3.6%, Flood D.U값은 3.0%으로 나타났고, $^{201}Tl$ Flood I.U값은 3.8%, Flood D.U값은 2.1%으로 나타났다. 이를 통해 $^{201}Tl$으로 Uniformity correction map을 설정하였을 때, Flood I.U값은 감소하였으나 Flood D.U은 향상되어 Flood 영상에서는 크게 영상의 질이 개선되었는지는 알 수 없었다. 반면 Jaszczak ECT Phantom test에서는 $^{99m}Tc$에서의 SPECT I.U값은 13.99%, Coefficient of variation값은 4.89%, contrast값은 0.69, $^{201}Tl$에서의 SPECT I.U값은 11.37%, Coefficient of variation값은 4.79%, contrast값은 0.78로 나타났으며, 육안 분석을 실시한 Spatial Resolution 항목에서는 육안으로 큰 차이를 보이지 않았다. 이를 통해 $^{201}Tl$으로 Uniformity correction map을 설정하였을 때, Spatial Resolution 을 제외한 SPECT I.U, Coefficient of variation, Contrast 세 항목에서 각각 18%, 2%, 13%의 향상된 수치를 보였다는 점에서 영상의 질이 개선되었음을 알 수 있었다. Uniformity correction map이 영상의 질을 크게 좌우할 수 없으나, 개선의 효과를 가져다 준다는 점에서 임상적으로 진단에 영향을 주는지 또한 다른 검사에서 또 다른 방사성 동위원소로 Uniformity correction map을 설정했을 경우 영상의 질을 개선시킬 수 있는지에 관하여 추가적인 연구가 필요할 것으로 사료된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.216-218
• /
• 2003

QuickBird satellite is quickly becoming the best choice for high-resolution mapping using satellite images. In this paper, we will describe the followings: (1) how to correct QuickBird data using different geometric correction methods, (2) data fusion using QuickBird panchromatic and multispectral data, and (3) automatic DEM extraction using QuickBird stereo data.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.598-601
• /
• 2006

Satellite imagery may contain large regions covered with atmospheric aerosol. A high-resolution satellite imagery affected by non-homogenous aerosol cover should be processed for land cover study and perform the radiometric calibration that will allow its future application for Korea Multi-Purpose Satellite (KOMPSAT) data. In this study, aerosol signal was separated from high resolution satellite data based on the reflectance separation method. Since aerosol removal has a good sensitivity over bright surface such as man-made targets, aerosol optical thickness (AOT) retrieval algorithm could be used. AOT retrieval using Look-up table (LUT) approach for utilizing the transformed image to radiometrically compensate visible band imagery is processed and tested in the correction of satellite scenery. Moderate Resolution Imaging Spectroradiometer (MODIS), EO-1/HYPERION data have been used for aerosol correction and AOT retrieval with different spatial resolution. Results show that an application of the aerosol detection for HYPERION data yields successive aerosol separation from imagery and AOT maps are consistent with MODIS AOT map.

• 한국통신학회논문지
• /
• 제31권12C호
• /
• pp.1201-1207
• /
• 2006

In this paper, we say the adaptive shading correction system supporting multi-resolution for mobile camera. The shading effect is caused by non-uniform illumination, non-uniform camera sensitivity, or even dirt and dust on glass (lens) surfaces. In general this shading effect is undesirable [1-3]. Eliminating it is frequently necessary for subsequent processing and especially when quantitative microscopy is the fine goal. The proposed system is available on thirty nine kinds of image resolutions scanned by interlaced and progressive type. Moreover, the system is using forty kinds of continuous quadratic equations instead of using the piece-wise linear curve which is composed of multiple line segments. Finally, the system could correct the shading effect without discontinuity in any image resolution. The proposed system is implemented in VLSI with cell library based on Hynix $0.25{\mu}m$ CMOS technology.

• 대한전자공학회논문지SP
• /
• 제40권1호
• /
• pp.43-50
• /
• 2003

오늘날 멀티미디어의 응용이 크게 늘면서 영상 취득 장치의 수요가 증대되고 있다. 그중 필름 스캐너는 고해상도와 고화질의 디지털 영상을 취득할 수 있는 장치이다. 그러나 필름 스캐너에서는 광원 및 센서의 비선형적 특성으로 인해 원 필름 영상의 컬러와 스캔된 영상의 컬러가 정확히 일치하지 않는 문제가 발생한다. 따라서, 필름 스캐너에서는 스캔된 디지털 영상에 대한 색보정이 필수적이다. 본 논문에서는 스캔된 RGB 색공간의 데이터를 CIE L/sup */a/sup */b/sup */ 색공간으로 변환한 후 다항회귀를 이용하여 색보정한다. 또한, TMS320C32 DSP 칩과 고해상도 라인 센서를 사용하여 R, G, B 각각 12 비트의 색분해도와 2400 dpi 급의 해상도를 갖는 스캐너 하드웨어를 구현하였다. 제작한 스캐너의 색보정 성능을 평가하기 위한 실험 결과, 색보정 전에는 평균색차 (ΔE/sup *//sub ab/)가 13.48 이었던 것이 색보정 후에는 8.46으로 감소함을 확인하였다.

• 한국측량학회지
• /
• 제26권3호
• /
• pp.219-225
• /
• 2008

원자력 발전소의 주변 지역은 해안지역이고 비교적 광범위하므로, 환경 변화를 감시하는데 많은 어려움이 있다. Landsat ETM+영상은 해상도가 30m 급이나 온도정보 추출에 있어 대기보정을 못하는 문제를 가지고 있다. MODIS 영상의 경우 2개의 적외선 밴드를 이용하여 대기보정된 비교적 적확한 온도를 추출할 수 있으나 해상도가 1km이다. 따라서, 두 위성영상의 자료를 이용한다면 대기보정된 고해상도의 온도자료를 추출할 수 있다. 본 연구에서는 대상지역의 Landsat ETM+영상에 대하여 기하보정을 수행하고, 방사휘도 및 온도를 산정한 후 MODIS영상을 이용하여 대기보정을 수행하였다. 그 결과 울진 원자력발전소 주변 연근해 지역과 온배수의 영향을 받지 않는 동쪽으로 5km 떨어진 동일 면적의 지역과 비교하여 보았을 때 약 $3.5^{\circ}C$ 높은 것을 알 수 있었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.157-157
• /
• 2017

To minimize the damage by wild birds and acquire the benefits such as protection against weeds and maintenance of water content in soil, the mulching black color vinyl after seeding should be carried out. Non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. Non-linear integral interpolation was one of method for analyzing the frequency using the normalization image and then arbitrarily increasing the limited data value of $16{\times}4pixels$ in one frame. It was a method to relatively reduce the size of overlapping pixels by arbitrarily increasing the limited data value. The splitted frames into 0.1 units instead of 1 pixel can propose more than 10 times more accurate and original method than the existing correction method. The non-integral calibration method was conducted by applying the subdivision method to the pixels to find the optimal correction resolution based on the first reversed frequency. In order to find a correct resolution, the expected location of the first crop was indicated on near pixel 4 in the inversion frequency. For the most optimized resolution, the pixel was divided by 0.4 pixel instead of one pixel to find out where the lowest frequency exists.