• 토지주택연구
• /
• 제8권4호
• /
• pp.233-247
• /
• 2017

유럽과 미국에서는 말뚝기초 설계에 한계상태설계법 사용이 거의 정착되었으며, 세계적 추세에 따라 국내에서도 국토해양부가 한계상태설계법에 기반한 교량하부기초 설계기준을 제정하였지만, 국내 말뚝공법 및 지반조건에 대한 저항계수 연구가 부족하여 당장 설계에 반영하기에는 어려운 여건이다. 이에 본 연구에서는 일반적으로 시용하고 있는 PHC 매입말뚝을 국내 지반조건에 고려하여 Meyerhof(LH 설계기준, 도로교 설계기준) 방법과 상재하중을 고려할 수 있는 정역학적 공식 (Terzaghi의 지지력 계수와 Hansen&Vesic의 지지력 계수 적용)으로 산정한 지지력을 정재하시험(9회)과 동재하시험(EOID 9회, Restrike 9회) 결과를 비교 분석하여 저항계수를 산정하였다. LH 연구원의 선행연구(PHC 매입말뚝의 하중저항 설계정수 제안, 2012)에서 동재하극한지지력 (Rut)을 기준으로 했을 때 LH 설계기준에 대한 저항계수는 0.36~0.44를 나타낸 바 있으며, 본 연구에서는 저항계수가 0.39~0.48로 나타나 선행연구의 저항계수보다 약 8%정도 증가하였다. 본 연구에서는 정재하시험 결괴를 위주로 저항계수를 산정하였으며, 극한지지력을 기준으로 했을 때의 저항계수는 0.57~0.69(Meyerhof 방법 : LH 설계기준), Davisson 지지력을 기준으로 했을 때의 저항계수는 0.49~0.60(Meyerhof 방법 LH 설계기준)으로 동재하시험에 의한 저항계수와 차이가 크게 나타났다. 이러한 차이를 줄이고자 수정동재하지지력을 제시하여 저항계수를 제시하였으며 이때의 저항계수는 0.52~0.62(Meyerhof 방법 : LH 설계기준)로 나타나 정재하에 의한 저항계수와 차이가 많이 줄어들었다. 결론적으로 본 연구에서 정재하 및 동재하시험으로 산정한 전체 저항계수는 0.35~0.76으로 도로교 설계기준에서 제시한 저항계수 0.3보다 커서 경제적인 설계가 가능할 것으로 판단된다.

• 전기학회논문지P
• /
• 제63권3호
• /
• pp.212-217
• /
• 2014

The electric power output characteristics of magnesium fuel cell were investigated with regard to internal resistance. A equivalent circuit with the series-connected three internal resistance was introduced to analyze of the response to change of power. The power output analysis was employed in order to investigate the effect of internal resistances for the electrolyte concentration, air electrode area, Mg electrode area and distance between the electrodes. It was confirmed that internal resistance is generated by the electrolyte, air electrode and metal electrode, then those Internal resistances had a significant effect on the power output decrease. The power output was a maximum when the load resistance maches the internal resistance of the magnesium fuel cell. The fuel efficiency was only 50% at maximum power output. Higher fuel efficiency was achieved when the load resistance is greater than the internal resistance.

• 한국수소및신에너지학회논문집
• /
• 제35권4호
• /
• pp.370-376
• /
• 2024

Load variations reduce the lifespan of polymer electrolyte fuel cells (PEFCs). To analyze the impact of load variations on durability of PEFCs, two stacks were built and operated continuously for 400 hours, one under load variations and the other under constant current condition with the same energy output. Using the example model provided by Mathworks, we obtained load variation data for the experiments. The performance curves were measured every 100 hours and analyzed by current interruption method and electrochemical impedance spectroscopy. The degradation comparison shows a much larger decrease in performance under the load variation. The activation resistance, electrical resistance, and mass transfer resistance are all found to increase more.

• 한국지반공학회논문집
• /
• 제21권10호
• /
• pp.113-122
• /
• 2005

신뢰성 기반의 한계상태설계법(Limit State Design; LSD)의 지반공학적 적용은 세계적으로 확산추세이며, 북미지역의 경우 일부 시방서에 하중 및 저항에 의한 LRFD 설계법이 지반공학적 설계에 적용되고 있다. 그러나 지금까지 제안되어 온 지반공학적 저항계수는 상당히 포괄적인 값이며, 이와 관련된 연구는 아직까지 초기단계라 할 수 있다. 콘관입시험은 대표적인 현장시험으로 특히 말뚝 설계에서 유용하게 활용되고 있으며, 다양한 말뚝 지지력 산정법이 제시되어 왔다. 본 연구에서는 콘관입시험을 이용한 항타 말뚝 지지력 평가를 위한 저항계수를 산정하고자 한다. 이를 위하여 여러 지역에서 수행된 말뚝재하시험과 콘관입시험 결과를 수집하여 확률적 분석을 수행하였으며, 이를 종합하여 저항계수 산정에 적용하였다. 본 연구에서는 전체지지력뿐만 아니라 말뚝의 선단 및 주면 지지력 각각에 대한 저항계수 또한 도출하고자 하였다. 저항계수 산정 결과, 목표신뢰도지수 $2.0{\sim}2.5$의 범위에서 전체지지력에 대한 저항계수 $0.35{\sim}0.55$범위를 나타내었다.

• Restorative Dentistry and Endodontics
• /
• 제39권4호
• /
• pp.270-275
• /
• 2014

Objectives: This study compared the mechanical properties of various instruments for canal exploration and glide-path preparations. Materials and Methods: The buckling resistance, bending stiffness, ultimate torsional strength, and fracture angle under torsional load were compared for C+ file (CP, Dentsply Maillefer), M access K-file (MA, Dentsply Maillefer), Mani K-file (MN, Mani), and NiTiFlex K-file (NT, Dentsply Maillefer). The files of ISO size #15 and a shaft length of 25 mm were selected. For measuring buckling resistance (n = 10), the files were loaded in the axial direction of the shaft, and the maximum load was measured during the files' deflection. The files (n = 10) were fixed at 3 mm from the tip and then bent $45^{\circ}$ with respect to their long axis, while the bending force was recorded by a load cell. For measuring the torsional properties, the files (n = 10) were also fixed at 3 mm, and clockwise rotations (2 rpm) were applied to the files in a straight state. The torsional load and the distortion angle were recorded until the files succumbed to the torque. Results: The CP was shown to require the highest load to buckle and bend the files, and the NT showed the least. While MA and MN showed similar buckling resistances, MN showed higher bending stiffness than MA. The NT had the lowest bending stiffness and ultimate torsional strength (p < 0.05). Conclusions: The tested instruments showed different mechanical properties depending on the evaluated parameters. CP and NT files were revealed to be the stiffest and the most flexible instruments, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.162-166
• /
• 2011

In railway, Tie supports rail and plays a role that distribute train load to the ballast. Also, Tie and ballast resist against external force and fix the track position. But, weakening resistance of ballast and tie cause vertical displacement of tie and track irregularity. For reinforcement of track stiffness and reduction of track irregularity, KORAIL has developed Multi Branch type tie(GLORY Tie) that reinforced resistance than general PCT and installed in order to test in the field. This study measured and analyzed lateral resistance of ballast, wheel load of rail, bending strain of rail foot, vertical displacement and vibration acceleration of tie in order to evaluate performance of Multi Branch type tie in the field. According to the results of test, Multi Branch tie is excellent than general tie about lateral resistance of ballast and vertical displacement of tie. And, gap of measurement value between Multi Branch type tie and general tie about wheel load of rail, bending strain of rail foot were very small.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.210-213
• /
• 1999

A battery is the device that transforms the chemical energy into the direct-current electrical energy directly without a mechanical process. Unit cells are connected in series to obtain the necessary voltage, while being connected in parallel to organize capacity for load current and to decrease the internal resistance for corresponding the sudden shift of the load current. The circular-current, however, could be occurred when the system is driven in parallel. As a result, the new batteries are heated by over-change and discharge, and the over charge current makes to increase the rust of the positive grid and consequently the shortened life of the new batteris would be shown. In this paper, the internal resistance of charge and discharge will be balanced, through inserting the resistance into the system by way of calculation of the changed amount of internal resistance.

• 한국주조공학회지
• /
• 제6권1호
• /
• pp.5-11
• /
• 1986

The Wear Characteristics of Al-Si alloys were investigated with various Si contents by using the not-dispersed alloys and uncoated-graphite dispersed alloys. Uncoated-graphite dispersions were accomplished by Vortex method carrying 1 hr. heating at $400^{\circ}C$ on uncoated-graphite. Wear loss were increased by increasing Si contents at the elevated final load. Hyper-eutectic alloys showed higher wear resistance values at the small final load of 2.1Kg and 3.2Kg, but at the more increased final load, hypo-eutectic alloys showed higher wear resistance values than hyper-eutectic alloys. The property of wear resistance of uncoated-graphite dispersed Al-Si alloys showed more good values than not-dispersed alloys. This peroperty of increased war resistance were resulted from lubricating action of dispersed graphite.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.385-390
• /
• 2001

This paper presents a nonlinear analysis technique with slip, the effects of slip modulus and composite action by shear connector on behavior and capacity in composite structure of sandwich system. As a results of this study, it proved that the slip modulus, in case of shear behavior, seldom influence load-resistance capacity such as yield and ultimate load, but in case of flexural behavior, it appropriately influence load-resistance capacity because of stress redistribution by slip. In case of flexural behavior, analysis result for perfect-composite results in over-estimation and perfect-slip results in under-estimation on behavior and capacity. Therefore, it is desirable to model steel-concrete interface with partial-composite. The effects of slip on behavior and capacity are less in case of positive composite than loosely composite, and it proved that composite action by shear connector improve the load-resistance capacity of this system.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.127-145
• /
• 1999

This paper deals with the development of an approach for evaluating the squash load and rigidity of unprotected concrete filled steel columns at elevated temperatures. The current approach of evaluating these properties is reviewed. It is shown that with a non-uniform temperature distribution, over the composite cross-section, the calculations for the squash load and rigidity are tedious in the current method. A simplified approach is proposed to evaluate the temperature distribution, squash load, and rigidity of composite columns. This approach is based on the model in Eurocode 4 and can conveniently be used to calculate the resistance to axial compression of a concrete filled steel column for any fire resistance time. The accuracy of the proposed approach is assessed by comparing the predicted strengths against the results of fire tests on concrete filled circular and square steel columns. The applicability of the proposed approach to a design situation is illustrated through a numerical example.