• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.4
• /
• pp.231-240
• /
• 2019

Purpose : This study aimed to determine whether resistance exercise using elastic bands for 6 weeks could improve the muscle strength, muscle tone, balance and gait among stroke patients. Methods : A total of 11 stroke patients who had agreed to participate in the study were randomly divided into 3 groups receiving elastic band resistance training on their less affected side (experimental group 1, n=4), affected side (experimental group 2, n=3), and both the sides (experimental group 3, n=4). Muscle strength, muscle tone, balance and gait were assessed using a hand-held dynamometer, the modified ashworth scale (MAS), the berg balance scale (BBS), and G-walk respectively, before and after training. Wilcoxon signed-rank test was used to analyze intergroup changes after the intervention, whereas the Kruskal Wallis H test, and Mann-Whitney U test were used to analyze intergroup changes in all variables. Results : Strength in all the muscle, except for the flexor and extensor muscles in the affected knees, was increased in all the groups, however, no significant difference was observed. No change in the muscle tone (MAS) was found in any group. All the groups showed increased BBS scores walking speed, and walking symmetry following training, although, the differences were not significant. Changes in the affected step length of experimental group 1 were significantly greater than those of experimental group 3, whereas changes in the affected step length in experimental group 3 were significantly greater than those of experimental group 2. Conclusion : Our results suggest that resistance exercise using elastic bands are a potential intervention for improving lower extremity muscle strength, balance, and gait among stoke patients.

• Journal of the Korean Ceramic Society
• /
• v.45 no.7
• /
• pp.405-410
• /
• 2008

Ceramics are widely used as plasma resistant materials in semiconductor industries. However, the plasma erosion resistance has not been properly evaluated in terms of microstructural changes during the exposure to plasma. In this study, microstructure developments of $Al_2O_3$ were investigated under the fluorine plasma conditions. In polycrystalline alumina, uniform erosion throughout the specimen as well as spatially distributed local erosion were observed. Local erosion was much more severe in lower purity alumina. In contrast to the polycrystalline alumina, only uniform erosion was observed in single crystalline sapphire. These specimens, however, had practically the same erosion depth, which results in the incorrectly similar plasma resistance. This implies that the plasma erosion resistance of ceramics should be evaluated in terms of the microstructural changes, as well as the conventionally accepted erosion depth.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.831-837
• /
• 2014

This paper focuses on the effects of the changes in the resistance characteristics caused by the changes of the POD shape installed in the Hydrofoil vessel, using the CFD(Computational Fluid Dynamics). We input the POD sections' basic shape as the origin of the x and y axis. Then as we cut the x-axis 0 to 2 cm, and the more we cut it, the total resistance value had increased. However, we have recognized the fact that as we cut the POD section, 3 to 5 cm, the resistance value had rather decreased. Furthermore we found out the result that as the cut partition was larger; the POD cross-section would decrease, resulting in the linear decrease of the viscous force.

• Corrosion Science and Technology
• /
• v.15 no.6
• /
• pp.259-264
• /
• 2016

With a specially designed electrochemical cell, the changes in impedance behavior for Inconel 600 and aluminide diffusion coatings under molten sulfate film with thermal cycles (from $800^{\circ}C$ to $350^{\circ}C$) were monitored with electrochemical impedance measurements. It was found that corrosion resistance for both materials increased with lower temperatures. At the same time, the state of molten salt was also monitored successfully by measuring the changes in impedance at high frequency, which generally represents the resistance of molten salt itself. After two thermal cycles, both Inconel 600 and aluminide diffusion coatings showed excellent corrosion resistance. The results from SEM observation and EDS analysis correlated well with the results obtained by electrochemical impedance measurements. It is concluded that electrochemical impedance is very useful for monitoring the corrosion resistance of materials under molten salt film conditions even with thermal cycles.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.4
• /
• pp.75-80
• /
• 1995

It is important to estimate the possibility of recovery in physiologically damaged woody plant. It is suggested that C.E.R(cambial electrical resistance) might be a useful method to predict the permanent wilting point. D/A and A/D converter can be used to measure the C.E.R and it took only 10-20 msec for a measurement and the values were stable during this study. A computer could be used for the continual measurement of C.E.R. There were very big daily changes of C.E.R. was changed according to the changes of indoor temperature, but the phase was slightly different. It is reasoned that daily changes in C.E.R. is induced by the changes of water potential and cambial thickness. It was difficult to detect the changes of C.E.R. caused by changes in soil moisture under high soil water potential. Under low soil water potential, the changes in soil moisture under high soil water potential. Under low soil water potential, the changes of C.E.R. can be detected. After wilting, C.E.R. is increased very rapidly. When C.E.R. is not decreased by watering, it will be permanent wilting point. But it takes several days to confirm the permanent wilting point. To predict the possibility of recovery from wilting, the values of C.E.R. have no meaning. But the changes of C.E.R. are significant. Therefore we can predict the permant wilting point in woody plant by monitoring the change of C.E.R. by the computer.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.69-77
• /
• 2020

PURPOSE: The aim of this study was to measure changes in spine inclination and thoracolumbar structure and morphology according to upper-extremity movements with and without resistance in order to evaluate the spine stability in workers. METHODS: Forty-eight middle-aged male workers (mean age, 40.48 ± 6.27 years) participated in this study. Using the spine analysis system, changes in the inclination of the spine and structure as well as shape of the thoracolumbar spine were measured. For posture measurement, the postures of standing, lifting the right and left arms (shoulder joint 90° flexion), and lifting with both arms were measured in random order. In addition, variables were measured using a resistance of 3 kg for each posture. The statistical significance level was set at α = .05 for all variables. RESULTS: There were statistically significant differences between the front and back inclinations of the spine, kyphotic curve of the thoracic spine, lordotic curve of the lumbar spine, rotation changes in the thoracolumbar spine, and rotation changes in the T4 vertebra (p < .05). However, there was no significant difference in the left and right tilts of the spine. In the post-hoc analysis, rotation changes in the T4 vertebra showed a significant difference in posture when resistance was applied to the left and right sides CONCLUSION: Causes of musculoskeletal diseases include excessive thoracic spine rotation, torsion, and hyperlordosis of the lumbar spine. Therefore, it is necessary to improve the working environment in order to ensure a healthy posture and prevent musculoskeletal diseases that can reduce the ability to carry various and/or excessive loads.

• Journal of the Korea Institute of Building Construction
• /
• v.5 no.1 s.15
• /
• pp.53-61
• /
• 2005

The purpose of this study presents useful data on the choice or development of floor covering from slip viewpoint by examining closely the impact of the changes in sliding experiments due to the wear of floor covering by walk. The result of wear practical test per ten thousand walks enforces some kind of popular floor covering and measure of coefficient of slip resistance as follows: (1) When surface of floor covering is in the state of wet, the degree of wear doesn't affect greatly in slip. (2) When surface of floor covering is in dry and clean state, most floor coverings have the tendency to lower the coefficient of slip resistance with the amount of walk on it. (3) Change in the tendency of slip resistance by wear appeared mainly due to the differences in the state of floor covering and organic floor covering appeared to have great reduction of coefficient of slip resistance than the inorganic ones. (4) According to the result of investigation on changes in tendency of coefficient of slip resistance due to the increase in the number of walk and if two hundred thousand walks were done, regardless of surface shape or kind of site, etc, the safety of floor covering, in slip viewpoint, greatly reduces.

• Journal of Environmental Science International
• /
• v.21 no.3
• /
• pp.267-276
• /
• 2012

Spaceflights results in the reduction of immune status of human beings and increase in the virulence of microorganisms, especially gram negative bacteria. The growth of Klebsiella pneumoniae is enhanced by catecholamines and during spaceflight, elevation in the levels of cortisols occurs. So it is necessary to know the changes in physiology, virulence, antibiotic resistance and gene expression of K. pneumoniae under microgravity conditions. The present study was undertaken to study effect of simulated microgravity on growth, morphology, antibiotic resistance and cross stress resistance of K. pneumoniae to various stresses. The susceptibility of simulated microgravity grown K. pneumoniae to ampicillin, penicillin, streptomycin, kanamycin, hygromycin and rifampicin were evaluated. The growth of bacteria was found to be fast compared with normal gravity grown bacteria and no significant changes in the antibiotic resistance were found. The bacteria cultured under microgravity conferred cross stress resistance to acid, temperature and osmotic stress higher than the normal gravity cultured bacteria but the vice versa was found in case of oxidative stress.

• Korean Journal of Materials Research
• /
• v.20 no.3
• /
• pp.148-154
• /
• 2010

It is necessary to develop new methods to prevent catastrophic failure of structural material in order to avoid accidents and conserve natural and energy resources. Design of intelligent materials with a self-diagnosing function to prevent fatal fracture of structural materials was achieved by smart composites consisting of carbon fiber tows or carbon powders with a small value of ultimate elongation and glass fiber tows with a large value of ultimate elongation. The changes in electrical resistance of CF-GFRP/GFRP (carbon fiber and glass fiber-reinforced plastics/glass fiber-reinforced plastics) composites increased abruptly with increasing strain, and a tremendous change was seen at the transition point where carbon fiber tows were broken. Therefore, the composites were not to monitor damage from the early stage. On the other hand, the change in electrical resistance of CP-GFRP/GFRP (carbon powder dispersed in glass fiber-reinforced plastics/glass fiber-reinforced plastics) composites increased almost linearly in proportion to strain. CP-GFRP/GFRP composites are superior to CF-GFRP/GFRP composites in terms of their capability to monitor damage by measuring change in electrical resistance from the early stage of damage. However, the former was inferior to the latter as an application because of the difficulties of mass production and high cost. A method based on monitoring damage by measuring changes in the electrical resistance of structural materials is promising for improved reliability of the material.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.853-863
• /
• 1999

the change of physical properties (thickness, weight, air permeability) and mechanical properties(abrasion resistance breaking load and displacement) of samples were determined after heat exposure by a RPP tester. The effect of exposure time and heat flux intensity on the changes and the relationship between physical properties and mechanical properties were investigated. FR treated cotton Kevlar/PBI and Nomex with different structureal characteristics were chosen for specimens. The changes of physical properties and mechanical properties were calculated based on their initial values before heat exposure. The longer exposure time and the high heat flux intensity the more changes of those properties. Heat flux intensity was more effective on the changes, The showed to be affected by an interplay of shrinkage and pyrolysis products loss. The changes of thickness and abrasion resistance showed to be higher for plain weave fabric and those of air permeabiliyt and breaking load and displacement for twill weave fabric. While FR treated cotton which have high RPP value experienced serious and detrimental changes after heat exposure Kevlar/PBI which has low RPP value showed no high changes. In conclusion it could be confirmed that when total performance of a protective clothing is estimated retention capability of physical and mechanical properties after heat exposure as well as RPP value must be considered.