• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.139-145
• /
• 2000

The mechanism of the inner resistance in a rubber crawler system has been investigated to reduce the power requirement (Kitano et al. 1994). The rolling resistance of the track roller, which is one of the major inner resistances, was measured for seven different vertical loads. The rolling resistance changed periodically and could be classified into three types. In case of the vertical load less than 500N, the rolling resistance was almost constant. For the vertical load greater than 500N, the maximum value of the rolling resistance increased. Further more in case of the vertical load greater than 1200N, negative resistance appeared. Analytical simulation of the travel resistance based on experimental results and static equilibrium equations derived from three-dimension mechanical model for the rubber crawler system. It was found that the simulation method was carried out to evaluate the travel resistance occurred by the rolling resistance of the track roller. The rolling resistance for each track roller arrangement and effects of the lug phase in the right and left rubber crawler could be estimated quantitatively.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.5
• /
• pp.602-611
• /
• 2022

The persistence of pathogenic Escherichia coli under acidic conditions poses a serious risk to food safety, especially in acidic foods such as kimchi. To identify the bacterial factors required for acid resistance, transcriptomic analysis was conducted on an acid-resistant enterotoxigenic E. coli strain and the genes with significant changes in their expression under acidic pH were selected as putative resistance factors against acid stress. These genes included those associated with a glutamate-dependent acid resistance (GDAR) system and copper resistance. E. coli strains lacking GadA, GadB, or YbaST, the components of the GDAR system, exhibited significantly attenuated growth and survival under acidic stress conditions. Accordantly, the inhibition of the GDAR system by 3-mercaptopropionic acid and aminooxyacetic acid abolished bacterial adaptation and survival under acidic conditions, indicating the indispensable role of a GDAR system in acid resistance. Intriguingly, the lack of cueR encoding a transcriptional regulator for copper resistance genes markedly impaired bacterial resistance to acid stress as well as copper. Conversely, the absence of YbaST severely compromised bacterial resistance against copper, suggesting an interplay between acid and copper resistance. These results suggest that a GDAR system can be a promising target for developing control measures to prevent E. coli resistance to acid and copper treatments.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.2
• /
• pp.218-225
• /
• 1995

Background: Airway resistance(Raw) is measured with the body plethysmograph by displaying the relationship between airflow and alveolar pressure($V/P_A$). If the resistance curve on $V/P_A$ tracing is curved or looped, the estimation of Raw is difficult. This study was designed to examine wheather there is any correlation between the shape of resistance curve and the clinical status and the pulmonary function of patients. Methods: The 146 pulmonary disease patients with increased Raw were included in this study. The shapes of resistance curves on $V/P_A$ tracing with body plethysmograph during quiet breathing were analyzed and compared with pulmonary function. Results: The results were as follows ; 1) The shapes of resistance curves were summarized in 5 categories; type 1: linear, type 2: ovoid, type 3: sigmoid, type 4: scoop, type 5: paisley. The type 3 except 1 case, type 4 and type 5 were found to have loop mainly in expiratory phase. 2) Although the shapes of resistance curves were not typical for specific disease, the resistance curves of acute disease tended to belong to type 1 or 2 and those of chronic airflow obstruction tended to belong to type 3, 4 or 5. But resistance curves of bronchial asthma and destructive lung with tuberculosis showed all types in proportion to degree of airflow obstruction or destruction of parenchyme. 3) In the cases of resistance curves going to type 5 rather than type 1 and those with looping, airflow obstuction tended to be severe and airway resistance and residual volume tended to increase. Conclusions: Analysis of resistance curve on $V/P_A$ tracing measuring airway resistance is helpful for judging degree of airflow obstruction and air trapping. Although the shape of resistance curve is not typical for specific disease, there is a close association between looping and airway obstruction.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.3
• /
• pp.289-297
• /
• 2005

In order to improve resistant properties of water-borne acrylic pressure sensitive adhesives(PSAs) for automobiles, this study was carried out. Removable PSAs for automobiles were synthesized by emulsion polymerization of monomers, n-butyl acrylate(BA), n-butyl methacrylate(BMA), acrylonitrile(AN), acrylic acid(AA) and 2-hydroxyethyl methacrylate(2-HEMA), and AA and 2-HEMA could act as functional monomers for crosslink. Emulsion polymerization was carried out in a semi-batch type reactor. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, water resistance increased with the amount of BMA, however, the effect of BMA content on the water resistance was insignificant at a range of over 14 wt%. The water resistance also increased with the amount of functional monomers, AA and 2-HEMA. The prepared PSAs satisfied all the standard for automobiles except heat resistance. However, the heat resistance comes nearly up to the standard. Also, acid resistance, alkali resistance and smoke resistance of the prepared PSAs satisfied with the standard.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.3
• /
• pp.219-220
• /
• 1996

The pKH2 isolated from the multidrug-resistant Staphylococcus aureus SA2 is a 40.98-kb plasmid and mediates resistance to ampicillin, clindamycin, erythromycin, kanamycin, and streptomycin. The 3.4-kb HindIII fragment conferring kanamycin resistance was cloned from the pKH2 into pBluescriptII $KS^+$ and partial sequence determination of that fragment was carried out. Sequence analysis revealed that the kanamycin resistance gene which encoded aminoglycoside 3'-phosphotransferase was linked to the streptothricin resistance gene. But a nonsense mutation was found in the streptothricin resistance gene and this mutation resulted in a truncated protein of streptothricin acetyltransferase. Homology comparison with nucleotide sequence databases revealed that the 3.4-kb HindIII fragment of pKH2 had been derived not from S. aureus but from Gram-negative Campylobacter coli.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2415-2418
• /
• 2014

In this report, the contact resistance between "electrode" and "lead" is investigated for reasonable measurements of samples' resistance in a polypyrrole (PPy) nanowire device. The sample's resistance, including "electrode-lead" contact resistance, shows a decrease as force applied to the interface increases. Moreover, the sample's resistance becomes reasonably similar to, or lower than, values calculated by resistivity of PPy reported in previous studies. The decrease of electrode-lead contact resistance by increasing the applying force was analyzed by using Holm theory: the general equation of relation between contact resistance ($R_H$) of two-metal thin films and contact force ($R_H{\propto}1/\sqrt{F}$). The present investigation can guide a reliable way to minimize electrode-lead contact resistance for reasonable characterization of nanomaterials in a microelectrode device; 80% of the maximum applying force to the junction without deformation of the apparatus shows reasonable values without experimental error.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.98-104
• /
• 2002

A study on microstructures of welds for Zircaloy-4 sheath end closure by the resistance upset welding methods was carried out. Two upset welding process variations such as magnetic farce and multi-impulse resistance welding were used. Grain size and microhardness across welds were analysed in terms of welding parameters. Magnetic farce resistance weld with one cycle of unbalanced mode has smaller upset length and $\alpha-grain$ size in heat affected zone than those of multi-impulse resistance weld because of lower heat input and shorter welding time. Heat affected zone formed by two upset resistance welding variations revealed fine Widmanstatten structure or martensitic ${\alpha}'$ structure due to the high heating rate and foster cooling rate. Magnetic force resistance welds showed recrystallized grains before grain growth, whereas multi-impulse resistance welds showed full grain growth.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.290-290
• /
• 2022

Powdery mildew is known to be one of the serious diseases in C. moschata cultivation. Plants infected with powdery mildew cause damage to cultivation areas such as occurrence of deformity fruit and decrease in quantity. also, it has been reported that many farms have difficulties in controlling powdery mildew due to the outbreak under various conditions throughout the year. Therefore, this study intends to perform a phenotype test and a genotype test for C. moschata 60 lines grown in Jenong S&T. Podospareaxanthii, known as a pathogen that causes powder mildew disease in pumpkins in Korea, was collected and used as an inoculation source, phenotype test was performed by examining the infection area rate(%) of powdery mildew disease that occurred in leaves 25 days after inoculation. It was determined that 0% of the infection area rate was in the first stage, 1 to 5% in the second stage, 6 to 15% in the third stage, 16 to 30% in the fourth stage, and 31% or more in the fifth stage, The first and second stages were judged as resistance, the third as moderate resistance, and the fourth and fifth stages as sensitivity. As a result of the phenotype test, it was confirmed that the resistance was 21 points, moderate resistance was 14 points, and sensitivity was 25 points. After searching for the genes related to powdery mildew resistance resistance, pm-0, CmbHLH87, and LOC111453072, 21 points of resistance and 9 points of moderate resistance identified through phenotype tests were identified through gel electrophoresis after polymerase chain reaction(PCR) using 5 primers related to 3 genes. As a result of genotype testing of a total 30 points, the CmbHLH87 and LOC111453072 gene were found to be resistant bands in all points, PMR1 was identified as 20 points for resistance, 4 points for moderate resistance, and 6 points for sensitivity, PMR2 was not identified in the entire band, and PMR5 was identified as 18 point for resistance, 3 points for moderate resistance, and 9 points for sensitivity. As a result, when comparing the phenotype test results and genotype test results, CmbHLH87 and LOC111453072 genes was 100% consistent in resistance and moderate resistance, PMR1 was 95.2% in resistance, 44.4% in moderate resistance, and PMR5 was 90% in resistance and 33.3% in moderate resistance, PMR2 was not consistent in resistance and moderate resistance. Therefore, it is expected that more accurate PMR test will be possible by using molecular markers(PMR1, PMR5) and by developing CmbHLH87 and LOC111453072 gene-related molecular markers.

• International Journal of High-Rise Buildings
• /
• v.2 no.1
• /
• pp.39-48
• /
• 2013

The fire resistance performance of generic CFT columns has been verified through various tests and analyses and the columns are widely used for fire resistance designs abroad. In this study, 3 groups of specimens (Non-fire protection, reinforcement with steel fiber and fire resistance paint) are suggested in order to evaluate the fire resistance performance of interior anchor type concrete-filled steel tubular columns having efficient cross-sections through loaded heating tests. Axial deformation-time relationship and in-plane temperatures are compared to evaluate the fire resistance performance of the specimens associated with variables. Suggested from the fact that the interior anchors exposed to fire exert influence on fire resistance performance due to thermal expansion, the reinforcements using steel fiber and fire resistance paint are verified to mitigate contraction and improve fire resistance performance. The result obtained from the tests of interior anchor type concrete-filled tubular columns is expected to be used for effective fire resistance design in association with previously conducted studies.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.1-8
• /
• 2012

PURPOSES : Skid resistance on pavements plays an important role in reducing the risk of vehicle skidding on wet surface particularly. Almost 9.3 percent of traffic accidents were occurred under rainy condition and these are over-represented in terms of the severity of the crashes. Recently, unusual weather conditions referred widely as the intensified rainfalls justify the need of a systematic management of skid resistance. In this context, the study carried out the observational study on the skid resistance characteristics of different types of pavement with the time passage. METHODS : This study measured the skid resistance with Pavement Friction Tester at three times within five years. The skid resistance measurement has followed the method suggested by ASTM. RESULTS : As the main results under the scope of this study, skid resistance of asphalt concrete has not nearly reduced with time. On the contrary, skid resistance of cement concrete has been rapidly reduced with time though the highest resistance was gained at the early observation. Porous asphalt concrete shows a steady decrease of skid resistance with time, anyway, the reduction rate according to the increase of measurement speeds is relatively lower than the others. CONCLUSIONS : Based on our study, skid resistance of the pavement should be regarded as one of the pavement management system, so periodic measurement should be made to assure road safety as a whole.