• Journal of the Korean Wood Science and Technology
• /
• v.35 no.5
• /
• pp.67-75
• /
• 2007

As a part of abating the formaldehyde emission of urea-formaldehyde (UF) resin adhesive by lowering formaldehyde to urea (F/U) mole ratio, this study was conducted to investigate properties of UF resin adhesive with different F/U mole ratios. UF resin adhesives were synthesized at different F/U mole ratios of 1.6, 1.4, 1.2, and 1.0. Properties of UF resin adhesives measured were non-volatile solids content, pH level, viscosity, water tolerance, specific gravity, gel time and free formaldehyde content. In addition, a linear relationship between non-volatile solids content and sucrose concentration measured by a refractometer was established for a faster determination of the non-volatile solids content of UF resin. As F/U mole ratio was lowered, non-volatile solids content, pH, specific gravity, water tolerance, and gel time increased while free formaldehyde content and viscosity were decreased. These results suggested that the amount of free formaldehyde strongly affected the reactivity of UF resin. Lowering F/U mole ratio of UF resin as a way of abating formaldehyde emission consequently requires improving its reactivity.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.1-11
• /
• 2002

This study was conducted to investigate the effects of reaction pH conditions and hardener types on the reactivity, chemical structure and adhesion performance of UF resins. Three different reaction pH conditions, such as traditional alkaline-acid (7.5 → 4.5), weak acid (4.5), and strong acid (1.0), were used to synthesize UF resins which were cured by adding three different hardeners (ammonium chloride, ammonium citrate, and zinc nitrate) to measure adhesion strength. Fourier transform infrared (FT-IR) and carbon-13 nuclear magnetic resonance (¹³C-NMR) spectroscopies were employed to study chemical structure of the resin prepared under three different reaction pH conditions. Adhesion strength of the resins cured with three different hardeners was determined with lap shear specimens in tension. The gel time of UF resins decreased with an increasing in the amount of both ammonium chloride and ammonium citrate added in the resins. However, the gel time increased for zinc nitrate. Both FT-IR and ¹³C-NMR spectroscopies showed that the strong reaction pH condition produce uronic structures in UF resin, while both alkaline-acid and weak acid conditions produce quite similar chemical species in the resins. The maximum adhesion strength was occurred with the resin prepared under strong acid pH condition. However, this study indicated that the weak acid reaction condition provide a balance between increasing resin reactivity and improving adhesion strength of UF resin. The measurement of formaldehyde emission from the panels bonded with the UF resins prepared is planned for future work.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.6
• /
• pp.394-398
• /
• 1988

Unusually high reactivity was found in peptide bond formation between p-nitrobenzophenone oxime resin (I) ester and amino acid 4-(methylthio)phentyl (MTP) esters. A charge-transfer complex between the two phenyl rings of the oxime resin (I) and the incoming amino acid MTP esters was considered to be responsible to accelerate the aminolysis reaction of the peptide oxime resin ester. Several di-, tri-, and pentapeptide fragments for preparing enkephalin and glutathione oligomers were successfully prepared in short times.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.3
• /
• pp.179-181
• /
• 1994

• The Journal of the Korean dental association
• /
• v.17 no.9 s.124
• /
• pp.695-700
• /
• 1979

An experimental study was performed to study the tissue reactions to tissue conditioners in rabbits. Thirty rabbits were divided into three groups, 10, Hydro-cast group, 10, Coe-comfort group, and 10, heat-cured resin group. Tissue conditioners and heat-cured resin were embedded in the oral mucosa of rabbits. The tissue specimens were removed on 3rd, 7th, 14h, 21st and 28th day after embedding and examined under microscope after staining them with H-E stain, Van Gieson's stain, Masson's trichrome stain and PAS reaction. The results were as follows : 1. Tissue reactions to tissue conditioners were somewhat different from each other in the early stage, but, with the increase of the embedding period, the fibrous capsule was thickened in both. These tissue reactions were similar to those to heat-cured resin. 2. Newly formd fibrous components were stained deep-red with Van Gieson's stain and dark-green with Masson's trichrome stain. But their stainability was decreased as collagenous fibers became matured. 3. Newly formed fibrous components showed intense PAS reactivity, but PAS reactivity was reduced as the connective tissue capsule became completed.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.1
• /
• pp.1-10
• /
• 1996

We have prepared diamine-benzoquinone polymer which was known to excellent water proofing, high adhesion strength and good anti-corrosive effect, and have investigate with the possibility of application as a high performance resin for coatings. First of all, the reactivity of diamine-benzoquinone has been described an example of polymer reaction with research trend. The polymer reaction was divided into the polymerization with several diamine-benzoquinone and urethane group. The synthetic resin was shown a high solubility. In case of polymer containing urethane, water absorption content, water proofing and mechanical properties were controlled with the content, water proofing and mechanical properties were controlled with the content of quinone. It was shown that an use of choice was a possible result for various coatings. Diamine-quinone polymer can be used as a new resin for coatings. In addition, the polymer containing a functional group was shown a useful applicability as a high performance resin.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.376-379
• /
• 1991

Pyrazolone group containing resin was tested as an acyl carrier in solid phase peptide synthesis. Several kinds of dipeptide derivatives were prepared by aminolysis reactions of Boc-amino acid-pyrazolone resin active ester with various carboxyl protected amino acid derivatives. It was found that the rates of aminolysis reactions were largely dependent on the bulkiness of the amino acid side chains, the carboxyl protecting groups, and the swelling property of the resin. All the dipeptide derivatives were obtained in high yield in 20-30 minutes, and the pyrazolone resin could be reused repeatedly in peptide synthesis without any change of its reactivity.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.61-65
• /
• 1998

Epoxy resins are currently one of the most widely used thermoset polymers. Applications on epoxy-based materials range from common to structural adhesives as well as to matrix materials for high performance composites. The outstanding versatility of this resin can be related to the reactivity of the epoxy group, which can be opened by a large number of different chemical compounds, such a aliphatic and aromatic amines, anhydrides and poly-amides. (omitted)

• Elastomers and Composites
• /
• v.28 no.1
• /
• pp.13-21
• /
• 1993

Polyurethane resin was especially mixed with polybutadiene rubbers which had each other different molecular structures and functional groups. Liquid and cure properties were tested experimentally for mixtures. Viscosity of mixtures and drying time were influenced by solubility of thinner and reactivity of rubber. Adhesive strength represented maxium at rubber content $15{\times}22%$ (Wt. % ), and rapidly decreased over 25%. DBTDL(di-n-butyltindilaurate) showed the longest stroage stability.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.138-143
• /
• 2011

Recently epoxy resin compositions having backbone of novolac derivatives with biphenylene compounds have been used as materials of eco-freindly EMC (Epoxy Molding Compound), because the cured epoxy resin compositions show the self-extinguishing without flame retardant additives. In this study, epoxy resin compositions were prepared and cured using novolac derivateves with biphenylene. Their propeties - structures of phenol derivatives and reactivity, thermal expansion, modulus, and thermal degradation - were obtained by DSC, DMA, TMA, TGA method. When both epoxy resin and hardenr had the biphenyl novolac structure, epoxy resin compositions showed low thermal expansion, good mechanical property, and combustion retardation.