• Title/Summary/Keyword: resin acids

Search Result 89, Processing Time 0.025 seconds

Photocure Reactions of Photoreactive Prepolymers with Cinnamate Groups

  • Kim, Whan-Gun
    • Bulletin of the Korean Chemical Society
    • /
    • v.32 no.3
    • /
    • pp.993-999
    • /
    • 2011
  • The photoreactive prepolymers with multifunctional cinnamate and bisphenol Atype cinnamate groups that could perform photodimerization without photoinitiators were synthesized by the reaction of t-cinnamic acids (CAs) and epoxy resins. Their photocure reaction rates and the extent of reaction conversion were measured with Fourier transform infrared spectroscopy, and these increased with the intensity of UVirradiation. The experimental data of these reaction rates showed the characteristics of nth-order kinetics reaction, and all kinetic constants of each photoreactive polymer with this equation were summarized. Although the GTR-1800-HCA and KWG1-EP-HCA with hydroxyl group substituted cinnamate showed lower reaction conversion rates and rate constant than GTR-1800-CA and KWG1-EP-CAwith an unsubstituted cinnamate group, GTR-1800-MCAand KWG1-EP-MCAwith methoxy group substituted cinnamate showed similar and higher reaction conversion rates than the former, respectively. These results were explained in terms of segmental mobility for photopolymerization by molecular interactions.

Isolation and Characteristics of Humic Substances in Raw water of Chuncheon-City (춘천지역 상수원수 중 휴믹물질의 분리 및 특성)

  • Lee, Yu-Mi;Rhee, Dong-Seok
    • Journal of Industrial Technology
    • /
    • v.27 no.B
    • /
    • pp.109-114
    • /
    • 2007
  • Humic substances generally comprise 30-50% of the dissolved organic carbon in water. They can affect water quality adversely in several ways and they are important from a water treatment perspective due to their role as precursors for the formation of chlorination by-products such as trihalomethanes. The objectives of this research are to investigate the characteristics of organic matter using raw water of Chuncheon area, to isolate the humic substance fractions from natural water samples, and characterize the extracted humic substances. Humic substances were fractionated according to "isolation of IHSS aquatic humic and fulvic acids" using XAD resin adsorption technique. Characteristics of humic substances were analyzed through DOC, $UV_{254}$, $SUVA_{254}$, FT-IR spectra, fluorescence analysis.

  • PDF

Trimerization of Isobutene over Solid Acid Catalysts under Wide Reaction Conditions

  • Yoon, Ji-Woong;Jhung, Sung-Hwa;Kim, Tae-Jin;Lee, Hee-Du;Jang, Nak-Han;Chang, Jong-San
    • Bulletin of the Korean Chemical Society
    • /
    • v.28 no.11
    • /
    • pp.2075-2078
    • /
    • 2007
  • Oligomerization of isobutene has been investigated using a few solid acid catalysts in order to produce efficiently triisobutenes that are useful chemical feedstocks for heavy alkylates and neo-acids. Several reaction conditions such as space velocity and isobutene concentration are evaluated, and a few cation exchange resins with various acid capacities were compared in the reaction. High trimers selectivity and high conversion can be obtained over a catalyst containing high acid capacity at low space velocity and relatively low isobutene concentration. The stability of a catalyst for the reaction is high when the acid capacity of the catalyst is high (for example Amberlyst-35).

Synthesis of Dynorphin B Analogues by Solid-Phase Method (고상법에 의한 Dynorphin B 유도체의 합성)

  • Kook, Soon Uoong;Son, Ki Nam
    • Journal of the Korean Chemical Society
    • /
    • v.42 no.2
    • /
    • pp.214-219
    • /
    • 1998
  • Dynorphin B analogues, $[Arg^{11}, D-Ala^{12}]$dynorphin B, $[D-Ala^2, Ala^6, Arg^{11}, D-Ala^{12}]$dynorphin B, and dynorphin B (1-11) were synthesized by solid-phase method. A chloromethylated polystyrene resin cross-linked with 2% divinylbenzene was substituted with Thr in ethanol to contain 1.20 mmol Thr/g of resin. All amino groups of amino acids were protected with t-Boc group and 2,6-dichlorobenzyl and nitro groups were used to protect the side chains of Tyr and Arg, respectively. Stepwise synthetic method was applied for synthesis of the products. Dicyclohexylcarbodiimide (DCC) and 1-hydroxybenzotriazole (HOBT) were used as the coupling reagents. The crude peptides were purified by gel filteration on Sephadex LH-20 column $(2 \times 50 cm)$ using MeOH/MeCN (3/1) and then characterized with HPLC, amino acid analyzer.

  • PDF

Preparation of Soft Etchant to Improve Adhesion Strength between Photoresist and Copper Layer in Copper Clad Laminates (CCL 표면과 포토리지스트와의 접착력 향상 위한 Soft 에칭액의 제조)

  • Lee, Soo;Moon, Sung-Jin
    • Journal of the Korean Applied Science and Technology
    • /
    • v.32 no.3
    • /
    • pp.512-521
    • /
    • 2015
  • In this research, environmental friendly organic acid containing microetching system to improve adhesion strength between photoresist resin and Copper Clad Laminate(CCL) was developed without using strong oxidant $H_2O_2$. Etching rate and surface contamination on CCL were examined with various etching conditions with different etchants, organic acids and additives. to develope an optimum microetching condition. Etching solution with 0.04 M acetic acid showed the highest etching rate $0.4{\mu}m/min$. Etching solution with the higher concentration of APS showed the higher etching rate but surface contamination on CCL is very serious. In addition, stabilizer solution also played an important role to control the surface contamination. As a result of research, the etching solution containing 0.04 M of acetic acid, 0.1 M of APS with 4 g/L of stabilizer solution(ST-1) was best to improve adhesion between CCL and photoresist resin as well as showed the most clean and rough surface with the etching rate of $0.37{\mu}m/min$.

Organic Compounds in the Nak Dong River and Its Toxicity (낙동강 수질중 유기물질과 독성)

  • 류병호;심종환;최진택;조현철;정종순
    • Journal of Environmental Health Sciences
    • /
    • v.20 no.1
    • /
    • pp.39-53
    • /
    • 1994
  • This study aims to investigate organic compounds and its toxicity by Ames test and chromosomal aberration in the water of the Nak Dong River. Six sampling sites such as Goryung, Hagueun, Maelie, Duksan, Haedong and Myungiang were selected for these pur15oses. 200 l water samples were absorbed on XAD-2 resin columns (2.5X30cm), eluted with organic solvents mixture of acetone: cyclohexane and then dried under vacuum condition. The extracts from the XAD-2 resin was injected into GC/MS and 184 organic compounds were identified such as aldehydes, aromatic compounds, ketones, phenols, hydrocarbons, alcohols, carboxylic acids, alkanes and some unknowns. The US EPA priority pollutants such as naphthlene, bis(2-ethylhexyl)phthalate and other pollutants, 1,2-diethyl benzene, 1,2,3,4-tetrahydronaphthalene and cyclohexanol were detected in these samples. The concentration of chemical pollutants such as 1,2-diethyl benzene, nephthalene, 1,2,3,4-tetrahydronaphthalene, bis(2-ethylhexyl)phthalate and cyclohexanol were ranged into 1.228 $\mu$g/l, 298 $\mu$g/l, 30.191 $\mu$g/l, 1.147 $\mu$g/l and 2.839 $\mu$g/l, respectively. The mutagenic activity of XAD-2 extracts were tested on Salmonella typhimurium TA 98, TA 100, TA 1535 and TA 1537 and then exhibited strong mutagenic activity against S. typhimurium TA 98 and TA 100 in the presence of S$_9$. Amon them, bis(2-ethylhexyl)phtalate and 1,2-diethyl benzene showed the most strongest mutagenic activity against S. typhimurium TA 98 and TA 100 in the presence of S$_9$. On the other hands, chromosomal aberration of XAD-2 extracts in the human blood cells were not occurred by the sampling water at Goryung, Hagueun, Maelie and Duksan, Chromosomal aberration were also not occurred by the each concentration of 0.05, 0.1 amd 0.3 mg/l of each 1,2-diethyl benzol, bis(2-ethylhexyl)phthalate, naphthalene, phenol, cyclohexanol and benzothiazol test solution.

  • PDF

Development of Biologically Active Compounds from Edible Plant Sources-I. -Isolation of Major Components from the Tuber of Ipomoea batatas Lam.- (식용 식물자원으로부터 활성물질의 탐색-I. -고구마(Ipomoea batatas Lam.) 괴근 주요성분의 분리-)

  • Ahn, Eun-Mi;Bang, Myun-Ho;Kim, Hae-Yeong;Baek, Nam-In
    • Applied Biological Chemistry
    • /
    • v.40 no.6
    • /
    • pp.583-587
    • /
    • 1997
  • The MeOH extracts obtained from the tuber of Ipomoea batatas Lam. were solvent-fractionated with EtOAc, n-BuOH, and $H_2O$, respectively. From EtOAc fraction four different compounds were isolated through the repeated silica gel column chromatographies. From not only the results of NMR and MS data but also the adaptation of hydrolysis, methylation, and acetylation, the chemical structures of compounds were elucidated as resin glycoside, simonin I, ${\beta}-sitosterol$, and two kinds of unsaturated fatty acids.

  • PDF

A Study on the Preparation of UPE Resins with Different Glycol Molar Ratios and Their Physical Properties : 3. Estimation of Viscoelastic and Critical Surface Tension of UPE Liquid Resins (글리콜 몰비가 다른 불포화 폴리에스테르 수지의 제조 및 물성에 관한 연구 : 3. UPE 액상 수지의 임계표면장력 및 점탄성 평가)

  • 이상효;안승국;이장우
    • Polymer(Korea)
    • /
    • v.24 no.5
    • /
    • pp.589-598
    • /
    • 2000
  • In this study, various unsaturated polyester (UPE) resins were prepared from the condensation polymerization of mixtures of saturated (isophthalic acid : IPA) and unsaturated (maleic anhydride : MA) dibasic acids with propylene glycol (PG), neopentyl glycol (NPG). The critical surface tension (Υ$_{c}$) for the surface characteristics of a solid were estimated by Zisman plot, and the structure-property relationship was investigated by measuring the rheology of resins. The values of Υ$_{c}$ for glass of solid were 30.5 mNㆍm$^{-1}$ for UPE resin liquids. As the content of NPG in a PG/NPG glycol mixture increased, both the contact angle and the surface tension of the UPE resin liquids were found to decrease. The dynamic viscoelasticities of UPE resins with different glycol molar ratios were also measured. Shear rate dependence of viscosity and angular frequency dependence of storage, and loss modulus tended to decrease with increasing NPG content.

  • PDF

EFFECT OF CONCENTRATION OF PHOSPHORIC ACID ON MICROLEAKAGE TO TOOTH STRUCTURE (인산농도에 따른 치질의 미세누출 효과)

  • Kim, Byung-Tae;Cho, Young-Gon;Moon, Joo-Hoon
    • Restorative Dentistry and Endodontics
    • /
    • v.21 no.2
    • /
    • pp.559-568
    • /
    • 1996
  • The purpose of this study was to evaluate the micro leakage of composite resin when various phosphoric acid agents were used to etch the enamel and dentin. In this study, class V cavities were prepared on the buccal surfaces of fourty extracted human molar teeth, and they were randomly assigned into 4 groups with 10 teeth. The cavities of each groups were etched with 10%, 32%, 35% and 37% phosphoric acids for 15 seconds, washed and dried and the cavities were restored with composite resin after application of the adhesive. The specimens were immersed in 2% methylene blue solution for 3 days. And then, the specimens were sectioned buccoligually. Degree of dye penetration at tooth-restoration interfaces was examined by Inverted Metallurgical Microscope at the occlusal and gingival margins. The result were as follows : 1. The degree of microleakage at occlusal and gingival margin in all group was statistically difference among 10% and 35% (P<0.01), 10% and 37% (P<0.01), 32% and 35% (P<0.05) and 32% and 37% (P<0.05) acid concentrations, but was not statistically difference between 10% and 32%, 35% and 37% acid concentrations (P>0.05). The degree of microleakage was showed to dimish with increase of acid concentration. 2. The degree of microleakage at the occlusal margin was statistically significant difference among 10% and 32%,10% and 35%, 10% and 37% acid concentrations(P<0.05). The degree of microleakage among 32% and 35%, 32% and 37% and 32% and 37% acid concentrations was not statistically significant difference. 3. In comparison of microleakage at the gingival margin, the degree of microleakage above 32% acid concentration was not showed less than 10% acid concentration (P>0.05). In comparison of 32%, 35%, 37% acid concentrations, the degree of microleakage at 35% and 37% acid concentrations was showed less than 32% acid concentration(P<0.05).

  • PDF