• Journal of the Korean Ceramic Society
• /
• v.32 no.1
• /
• pp.120-130
• /
• 1995

To analyze the mechanical property and the residual stress in functionally gradient materials(FGMs), disctype TZP/Ni-and TZP/SUS304-FGM were hot pressed using powder metallurgy compared with directly bonded materials which were fabricated by the same method. The continuous interface and the microstructure of FGMs were characterized by EPMA, WDS, optical microscope and SEM. By fractography, the fracture behavior of FGMs was mainly influenced by the defects which originated from the fabrication process. And the defectlike cracks in the FGMs induced by the residual stress have been shown to cause failure. This fact has well corresponded to the analysis of the residual stress distribution by Finite Element Method (FEM). The residual stress generated on the interface (between each layer, and matrix and second phase, respectively) were dominantly influenced on the sintering temperature and the material constants. As a consequence, the interfacial stability and the relaxation of residual stress could be obtained through compositional gradient.

• Journal of Welding and Joining
• /
• v.21 no.6
• /
• pp.64-70
• /
• 2003

Multipass welds of the 316L stainless steel have been widely employed in the pipes of Liquid Metal Reactor. Owing to localized heating and subsequent rapid cooling by the welding process, the residual stress arises in the weld of the pipe. In this study, the residual stresses in the 316L stainless steel pipe welds were calculated by the finite element method using ANSYS code. Also, the residual stresses both on the surface and in the interior of the thickness were measured by HRPD(High Resolution Powder Diffractometer) instrumented in HANARO Reactor. The experimental data and the calculated results were compared and the characteristics of the distribution of the residual stress discussed.

• Journal of Environmental Science International
• /
• v.15 no.12
• /
• pp.1199-1203
• /
• 2006

This paper analyzes the separation efficiency of vehicles mat residual product, and caloric value, element analysis and heavy metal of separated PE & PVC mat residual product. A results of separation efficiency, fiber fraction of PE & PVC mat residual product was analyzed 71.9% and 18.6%, respectively. Caloric value of PE & PVC mat residual product was analyzed 3,894kca1/kg and 10,203kca1/kg, respectively. A results of element analysis, main component of PVC mat were carbon(33.2%) and oxygen(21.0%), and main component of PE mat fiber were carbon(75.4), hydrogen(11.3%) and oxygen(9.1%). Lead and cadmium concentration of PVC powder was detected 98.9mg/kg and 19.8mg/kg, but Lead and cadmium concentration of fiber was detected 15.7mg/kg and 6.1mg/kg.

• International Journal of Korean Welding Society
• /
• v.5 no.1
• /
• pp.1-9
• /
• 2005

Multipass welds of 316L stainless steel have been widely employed to the pipes of Liquid Metal Reactors. Owing to localized heating and a subsequent rapid cooling by the welding process, residual stress arises in the weld of the pipe. In this study, the residual stresses in the 316L stainless steel pipe welds were calculated by the finite element method using the ANSYS code. Also, the residual stresses both on the surface and in the interior of the thickness were measured by the HRPD(High Resolution Powder Diffractometer) instrumented in the HANARO Reactor. The experimental data and the calculated results were compared and the characteristics of the distribution of the residual stress were discussed.

• Food Science of Animal Resources
• /
• v.23 no.4
• /
• pp.299-308
• /
• 2003

Quality characteristics of sausage added with green tea powder was studied to investigate the substitutive effect of green tea for nitrite. Residual nitrite, thiobarbituric acid reactive substances(TBARS) and volatile basic nitrogen(VBN) contents of 9 different sausages prepared with 3 levels of nitrite(50, 100 or 150 ppm) and 3 levels of green tea(0, 0.5 or 1％) were measured during storage at l0$^{\circ}C$ for 6 weeks or 20$^{\circ}C$ for 14 days. Proximate compositions of the sausage were not affected by the addition level of green tea or nitrite. The lightness(L value) and redness(a value) of sausage decreased, while yellowness(b value) increased, with the addition of green tea powder. Residual nitrite content was lower in sausages containing green tea when prepared with same amount of nitrite, showing the addition of green tea powder has a beneficial effect on reducing the residual nitrite content in sausage. TBARS and VBN contents were lower in sausages with nitrite and green tea than those with nitrite alone. The TBARS and VBN lowering effects of green tea were higher in sausages prepared with low level of nitrite than those prepared with high amount of nitrite. The results suggest that the addition of green tea powder may reduce the residual nitrite content of sausage, and the use of green tea may also cut down the use of nitrite in the production of pork sausage with little deterioration in preservation.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.5
• /
• pp.553-563
• /
• 2024

In this research, the thermal properties of limestone fine powder at high temperatures were examined, followed by an analysis of its residual compressive strength when incorporated into concrete under various thermal conditions, to determine its impact on concrete subjected to high heat. The study revealed that at 900℃, limestone micropowder undergoes a decarbonization reaction, where calcium carbonate(CaCO₃) decomposes into calcium oxide(CaO), accompanied by an expansion of the limestone powder as temperature increases. This expansion leads to material cracking or crushing starting at temperatures above 500℃. Further analysis on concrete mixed with limestone powder showed that heating up to 300℃ could promote the reaction of hydrates within the concrete, thereby enhancing its strength. However, exposure to temperatures beyond 500℃ causes the limestone powder within the concrete to crack or fracture, significantly reducing the concrete's strength properties. This study highlights the dual role of limestone fine powder in influencing concrete's behavior under high-temperature scenarios, demonstrating an initial strengthening effect followed by a detrimental impact at higher temperatures.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.225-226
• /
• 2006

In this present investigation, Metal Injection Moulding (MIM) of M2 High Speed Steel (HSS) parts using a wax-High Density Polyethylene (HDPE) binder is shown. The elimination of organic binder was carried out by thermal debinding under inert atmosphere. In order to keep carbon in the sample that could improve the sintering process, incomplete debinding was performed between 450 and $600^{\circ}C$. The specimens were sintered at temperatures between 1210 and $1280^{\circ}C$ in high vacuum atmosphere, obtaining the 98% of the theoretical density. In the samples with higher residual carbon content, the sintering window was extended up to 20 degrees and the optimum temperature was lower.

• Food Science and Preservation
• /
• v.10 no.2
• /
• pp.236-240
• /
• 2003

This study was carried out to obtain fundamental data when developing new colostrum component fortified milk products. Residual immunoglobulin G (IgG) activities of both IgG fortified milk products under different pasteurization conditions and colostrum fortified milk powder products under different dissolving temperatures were measured. In the study, residual IgG activities of raw milk and IgG (50 mg and 250 mg) fortified milk products were sharply reduced upon increasing the temperature of heat treatment. After the low temperature long time (LTLT) treatment residual IgG activities of raw milk, IgG 50 mg and 250 mg fortified milk products decreased to 79%, 30％ and 21.6%, as compared to those before heat treatment respectively. However, almost no residual IgG activities were detected when IgG fortified milk was heated at 95$^{\circ}C$ for 15 sec. There was no significant change in the residual IgG activities of IgG fortified milk powder products upon different dissolving temperatures (30$^{\circ}C$, 40$^{\circ}C$, 50$^{\circ}C$ and 60$^{\circ}C$).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05b
• /
• pp.126-126
• /
• 1992

Solid and liquid sintering behaviors of mechanically alloyed 75W-25Cu powders have been studied by using a dilatometry technique. The sintering was performed under hydrogen atmosphere of 1 atm with a heating rate of 3 $^{\circ}C$/min. The mechanically alloyed 75W-25Cu powders were prepared by high energy ball milling process under argon atmosphere of 1 atm with alloying times of 0 to 400 h. To compare with the sintering behaviors of mechanically alloyed powders, pure Cu and W powders were also sintered under the above conditions, As the mechanical alloying time increased from 0 to 400 h, the shrinkage behavior of the alloyed powders was enhanced during the sintering, and staring temperature of liquid sintering decreased from 1083 to 1068 $^{\circ}C$. The saturation temperature, above which the shrinkage was completed, of liquid phase sintering decreased from 1248 to 1148 $^{\circ}C$ with increasing mechanical alloying time from 200 to 400 h. The residual stress of the mechanically alloyed powder was measured by X-raydiffractometer. The microstructure of sintered spcimen was observed by optical and scanning electron microscope. From these results, variations of solid and liquid sintering behaviors with mechanical alloying time were discussed in terms of the amount of residual stress and the distribution of W and Cu powders in the mechanically alloyed powder.

• Journal of Magnetics
• /
• v.19 no.2
• /
• pp.106-110
• /
• 2014

$Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ HDDR-treated powder was compacted by hot-pressing using different configurations of dies and heating rates. The die configurations were especially different in terms of the evacuation system that was used in heating for hot-pressing. The coercivity in the compacts was influenced by the evacuation system of the die and heating rate. In spite of the identical hot-pressing temperature and heating rate, coercivity was radically reduced above $600^{\circ}C$ in the compacts prepared in the closed-type die compared to that in the compacts prepared in the open-type die. The coercivity in the compacts prepared in the closed-type die decreased with increasing heating rate and the value further increased when extreme high heating rate was employed. $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ HDDR-treated powder contained a significant amount of residual hydrogen (approx. 1500 ppm) in the form of $Nd_2Fe_{14}BH_x$ hydride. The dramatic coercivity decrease in the compact prepared in the closed die is attributed to the disproportionation of $Nd_2Fe_{14}BH_x$ hydride. High coercivity is mainly due to the effective desorption of hydrogen or the suppression of hydrogen-related disproportionation upon hot-pressing.