• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.79-84
• /
• 2012

As the huge economical loss and function paralysis of information technology-based systems can be caused by the misoperation of residual current devices(RCDs) due to surge voltages and currents, RCDs shall not operate by surge currents. In this paper, in order to evaluate the reliability of residual current operated circuit-breakers with integral overcurrent protection for household and similar uses((RCBOs) stressed by surges, the unintended trip characteristics of RCBOs under surge currents were experimentally investigated using the combination wave generator. Seven different types of single-phase RCBOs being present on the domestic market were investigated according to KS C IEC 61009-1 standard. As a result, all kinds of specimens were satisfied the requirements for 0.5 [${\mu}s$]/100[kHz] ring wave impulse currents. Most of specimens stressed by the 8/20[${\mu}s$] impulse current tripped at least one or more, and some of them were broken down during consecutive tests. It was found that only one type of specimens meets the L-N mode immunity to the combination wave of 1.2/50[${\mu}s$] impulse voltage and 8/20[${\mu}s$] impulse current.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.7-13
• /
• 2001

Wire electrical discharge machining experiments in conducted to investigate characteristics of acoustic emission (AE) and electrical discharge energy due to current peak (I$_{p}$), pulse on time($\tau$/on/). The AE signals are obtained with a sensor attached to workpiece side. Machining states are identified with scanning electron microscopy and residual stress analyzer. It is demonstrated that the residual stress provide reliable informations about the machining states. Moreover, machining states can be detected successfully using both the residual stress and AE count rate.e.

• 한국항만학회지
• /
• 제14권4호
• /
• pp.441-450
• /
• 2000

In order to improve the water quality in semi-enclosed bays, Gug et al. (1997) have proposed a new method to activate the tidal exchange by creation and control of tidal residual current through the addition of artificial elements to creation and control of tidal residual current through the addition of artificial elements to create bottom roughness, so, ot is advisable to arrange as few of these as possible from a point of cost-benefit view. This paper attempts to develop the most suitable shape of artificial bottom roughness units with which to create and control an optimal tidal residual current. Several simple shapes were examined as fundamental cases. Subsequently 38 types of artificial bottom roughness units based on a few simple effective shapes, were examined experimentally. As a result of this research, two types to create artificial roughness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.791-793
• /
• 1993

The hall sensor is current detector using hall effect in semiconductor and the conventional type detect current with concentrating flux by current of conductor. So, detection of small current is very difficult because of residual magnetism. This paper give the experiments based results about method that detect the small DC current using minimizing the residual of hall element by magnetic modulation and concentrating flux. The suggested sensor can dector small current better than the conventional that.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.198-207
• /
• 2008

The conventional Residual Current Protective Devices(RCD, or earth leakage circuit breaker, ELB) operates depending on the total leakage current which is the vector-sum of resistive and capacitive components of a leakage current. However, the electric disaster such as electric shock or fire is mainly caused by the resistive component. Therefore, in this view point, the RCD is more realistic when it operates by the resistive component of the leakage current. In this paper, a new algorithm for measuring the resistive leakage current from the total leakage current is suggested, and is realized to an actual circuit. According to the suggested algorithm, the resistive component of the leakage current can be found by integrating the total leakage current over only a half cycle of the line voltage, and it is realized by using analog switches and resettable integrators. It is confirmed through experiments that the suggested algorithm detects, within maximum average error of 6.74%, the resistive leakage current from the total leakage current, and the RCD employing the suggested algorithm brakes the circuit within the regular interrupt time(30msec).

• 한국해양학회지
• /
• 제22권1호
• /
• pp.9-18
• /
• 1987

제주도 주변 해역에 대한 많은 해수 특성 연구와 최근의 해류 관측 결과들은 제주도 서쪽 및 북쪽 해안에 연중 존재하는 시계 방향의 잔류가 있 음을 시사해 준 다. 제주도 동편 해역에서는 쓰시마 해류가 북쪽과 북동쪽으로 흐른다. 이 논문에서 는 2차원 비선형 천해방정식의 수치해로부터 구한 제주도 주변의 조석 잔차류가 관 측된 잔류를 어떻게 설명할 수 있는 가를 고찰하였다. 계산된 조석 잔차류는 섬 주 위에서 우선 회순환을 나타내며 섬 주위의 해저 경사 위에서만 2-4cm.s$^{-1}$의 크기로 현저히 나타나고 섬에서 멀리 떨어진 외해에서는 무시할 정도로 작다. 또한 제주도 주변의 잔류 순환에 대한 쓰시마 해류의 영향을 보기 위해 모델에 항류를 도입하여 수치 실험을 시도 하였다. 이러한 수치 실험 결과, 조석 잔차류와 쓰시마 해류에 기인된 항류의 복합된 효과가 제주도 서쪽 및 북쪽 해안에서 관측된 우선회 잔류와 섬의 동쪽 해역의 북향류를 잘 설명할 수 있음이 밝혀졌다.

• 한국해안·해양공학회논문집
• /
• 제24권3호
• /
• pp.149-158
• /
• 2012

본 연구는 강화도 서측에 위치한 조력 발전 유력 후보지인 석모수로의 북단과 남단의 2개 정선에서 13시간 연속으로 단면 유속과 염분 관측을 대,소조기시 각각 수행하여 단면 내 잔차류의 변화와 성층간의 관계를 분석 하였다. 석모수로의 염분 분포는 대,소조기에 따라 서로 다른 염분 구조 형태를 보이며, 염분의 침입 범위 또한 다르게 나타난다. 잔차류 성분은 13시간 유속 성분에서 최소 자승법을 이용하여 추출한 $M_2$분조와 $M_4$분조를 제거하여 구하였고, 석모수로 북단과 남단에서 표층의 잔차류 성분은 모두 남쪽 방향의 잔차류 성분을 보인다. 그러나 두 정선의 단면 저층에서는 표층과 저층간의 2층 흐름 구조를 만드는 북쪽 방향의 잔차류가 관측되는데 그 위치는 대,소조기에 따라 다르게 나타나 시,공간적으로 다른 결과를 보인다. 북쪽 방향의 잔차류와 성층의 관계를 분석하기 위해서 Richardson number와 Simpson-hunter index를 분석하였다. 이러한 결과를 종합할 때, 석모수로의 단면 잔차류 패턴은 Richardson number가 상대적으로 급격하게 커지고 Simpson-hunter index가 4 이상 나타나는 지역, 즉 성층이 강하게 나타나는 지역에서 2층 흐름 구조를 보인다.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.101-108
• /
• 1999

A reliable and practical monitoring of drill breakage is a crucial technique in automatic machining system. In this study, a real-time monitoring system was developed to predict drill breakage using both spindle and z-axis motor current. Drill breakage is monitored by detecting the level of residual motor current which is obtained through the moving average filter algorithm. The residual exhibits a feature of sharp decrease just before drill breakage. Therefore, drill breakage can be predicted by detecting this characteristic of residual component. Z-axis motor current is better to predict the drill breakage than spindle motor current, because the former is faster in response than the latter when drill breakage is occurred. The evaluation experiments have shown that the developed monitoring system works very well.

• 한국환경과학회지
• /
• 제11권1호
• /
• pp.25-32
• /
• 2002

In order to control of water quality in Jeju harbor, variation of physical oceanographic environments was estimated using material cycle model. It is composed of the three-dimensional hydrodynamic model for the simulation at water flow and material cycle model for the simulation of water quality. The three dimensional hydrodynamic model simulation of the circulation and mixing in Jeju Harbor has been conducted forced by Sanzi River Discharge, Tidal elevation, wind and Solar heat in case of August and November, 2000 and February and May, 2001, respectively. The results of numerical model and observation show that the model can produce realistic results of current in the harbor. The monthly variation of velocity pattern are not so much changed are found In Jeju Harbor. The residual current was forced by temperature, salinity, density, wind and tidal current. The residual current of August, 2000 are the strongest among four month. It can be explained that the density effect can be important role in residual current at Jeju Harbor. As the results of salinity distribution simulation, very low concentration of all levels were simulated in August, 2000. The flowrate of Sanzi river was investigated 77,760 ㎥ /d in August, 2000. Therefore, pollutant loadings from Sanzi river should be considered for water quality management in Jeiu harbor.

• 한국항만학회지
• /
• 제12권1호
• /
• pp.95-104
• /
• 1998

Water pollution in a semi-enclosed sea area such as a bay due to stagnancy of water has been a serious water environmental problem. Recently, some kinds of new methods to activate the tidal exchange between an inner bay and an outer sea area by control of a tidal residual current have been proposed. However, these methods have several problems, that is, I). deterioration in a natural view due to building of huge structures, II). increase of risk of navigation in case of a submerged structure, III). limition of sea area where a tidal current can be controlled and IV). difficulty in removing those structures in case of occurrence of an unexpected impact on water environment. In this paper, a new method is proposed, which can solve all the above problems, to purify water quality in a semi-enclosed bay by creation and control of a pattern of a tidal residual current. The tidal residual current is controlled by unsymmetric structures, which change the properties of resistance according to the direction of flow, arranged on the sea bottom. In this study, several numerical and hydraulic experiments of tidal current and particle-tracking for various arrangements of bottom roughness in a semi-enclosed model bay were carried out. As a result of experiments, it becomes clear that it is possible to generate a new tidal residual current and to activate a tidal exchange by only operation of bottom roughness arrangement.