• Investigative Magnetic Resonance Imaging
• /
• v.5 no.1
• /
• pp.57-65
• /
• 2001

Purpose : $T_2$-weighted half courier Echo Planar Imaging (T2HEPI) method is proposed to reduce measurement time of existing EPI by a factor of 2. In addition, high $T_2$ contrast is obtained for clinical applications. High resolution single-shot EPI images with $T_2$ contrast are obtained with $128{\times}128$ matrix size by the proposed method. Materials and methods : In order to reduce measurement time in EPI, half courier space is measured, and rest of half courier data is obtained by conjugate symmetric filling. Thus high resolution single shot EPI image with $128{\times}128$ matrix size is obtained with 64 echoes. By the arrangement of phase encoding gradients, high $T_2$ weighted images are obtained. The acquired data in k-space are shifted if there exists residual gradient field due to eddy current along phase encoding gradient, which results in a serious problem in the reconstructed image. The residual field is estimated by the correlation coefficient between the echo signal for dc and the corresponding reference data acquired during the pre-scan. Once the residual gradient field is properly estimated, it can be removed by the adjustment of initial phase encoding gradient field between $70^{\circ}$ and $180^{\circ}$ rf pulses. Results : The suggested T2EPl is implemented in a 1.0 Tela whole body MRI system. Experiments are done with the effective echo times of 72ms and 96ms with single shot acquisitions. High resolution($128{\times}128$) volunteer head images with high $T_2$ contrast are obtained in a single scan by the proposed method. Conclusion : Using the half courier technique, higher resolution EPI images are obtained with matrix size of $128{\times}128$ in a single scan. Furthermore $T_2$ contrast is controlled by the effective echo time. Since the suggested method can be implemented by software alone (pulse sequence and corresponding tuning and reconstruction algorithms) without addition of special hardware, it can be widely used in existing MRI systems.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.734-741
• /
• 2012

A new lossless intra coding method based on residual transform is applied to the next generation video coding standard HEVC (High Efficiency Video Coding). HEVC includes a multi-directional spatial prediction method to reduce spatial redundancy by using neighboring samples as a prediction for the samples in a block of data to be encoded. In the new lossless intra coding method, the spatial prediction is performed as samplewise DPCM (Difference Pulse Code Modulation) but is implemented as block-based manner by using residual transform and secondary residual transform on the HEVC standard. Experimental results show that the new lossless intra coding method reduces the bit rate by approximately 6.45% in comparison with the lossless intra coding method previously included in the HEVC standard.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.1
• /
• pp.1-11
• /
• 2000

The hybrid coding algorithm for multi-spectral image obtained from satellite is discussed. As the spatial and spectral resolution of satellite image are rapidly increasing, there are enormous amounts of data to be processed for computer processing and data transmission. Therefore an efficient coding algorithm is essential for multi-spectral image processing. In this paper, VQ(vector quantization), quadtree decomposition, and DCT(discrete cosine transform) are combined to compress the multi-spectral image. VQ is employed for predictive coding by using the fact that each band of multi-spectral image has the same spatial feature, and DCT is for the compression of residual image. Moreover, the image is decomposed into quadtree structure in order to allocate the data bit according to the information content within the image block to improve the coding efficiency. Computer simulation on Landsat TM image shows the validity of the proposed coding algorithm.

• The Korean Journal of Applied Statistics
• /
• v.33 no.6
• /
• pp.813-821
• /
• 2020

Recently, research using unstructured data such as images and videos has been actively conducted in various fields. Edge detection is one of the most useful image enhancement techniques to improve the quality of the image process. However, it is very difficult to perform edge detection in noise images because the edges and noise having high frequency components. This paper uses a linear model and standard deviation as an effective edge detection method for noise images. The edge is detected by the difference between the standard deviation of the pixels included in the pixel block and the standard deviation of the residual obtained by fitting the linear model. The results of edge detection are compared with the results of the Sobel edge detector. In the original image, the Sobel edge detection result and the proposed edge detection result are similar. Proposed method was confirmed that the edge with reduced noise was detected in the various levels of noise images.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.969-974
• /
• 2022

In order to maximize dynamic range and to minimize image lag in digital X-ray imaging, diminishing residual parasitic capacitance in photodiode in pixels is critically necessary. These requirements are more specifically requested in dynamic X-ray imaging with high frame rate and low image lag for industrial 2D/3D automated X-ray inspection and medical CT imaging. This study proposes duoPIX^TM X-ray imaging sensor for the first time that is composed of reset thin film transistor, readout thin film transistor and photodiode in a pixel. To verify duoPIX^TM X-ray imaging sensor, designing duoPIX^TM pixel and imaging sensor was executed first then X-ray imaging sensor with 105 ㎛ pixel pitch, 347 mm × 430 mm imaging area and 3300 × 4096 pixels (13.5M pixels) was fabricated and evaluated by using module tester and image viewer specifically for duoPIX^TM imaging sensor.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2007.02a
• /
• pp.9-12
• /
• 2007

다시점 동영상 부호화기는 서로 다른 카메라에 의해 영상을 획득하므로 카메라 내부 파라미터의 차이나 조명의 차이 및 변화 등에 의한 시점 간 명도 성분의 불균형을 가지고 있다. 이로 인해 잘못된 변이 추정이 이루어질 수 있으며, 따라서 전체적인 다시점 동영상 부호화의 성능을 크게 저하시킬 수 있다. 본 논문에서는 레지듀얼이 가지고 있는 밝기 차 정보를 이용하여 시점 간의 불균형을 해소하는 가중치 예측 알고리듬을 제안한다. 주변의 인과적인 블록의 레지듀얼 정보를 이용하여 현재 블록과 참조 블록의 밝기 차를 예측하고, 이 값을 이용해 시점 간 불균형을 보정 한 후 변이 추정을 수행한다. 변이 보상 후 계산된 현재 블록의 레지듀얼 평균값을 앞에서 예측된 밝기 차의 값에 누적하여 다음 블록의 밝기 차 예측에 사용한다. 제안된 방법을 실험 영상에 적용한 결과 평균적으로 약 0.2dB의 이득을 얻었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.7
• /
• pp.580-583
• /
• 2017

To compensate the degraded SAR image due to the residual errors and the spatial variant errors remaining after the motion compensation in the airborne SAR, we have introduced the autofocus method based on the partition processing. Thus, after we perform the spatial partition for the spotlight SAR data and the time partition for the stripmap SAR data, we reconstruct the subpatch images for the partitioned data. Then, we perform the local autofocus with the suitability analysis process for the phase errors estimated by the autofocus. Moreover, if the estimated phase errors are not properly compensated for the subpatch images, we perform the phase compensation method with the weight to the estimated phase error close to the degraded subpatch image to increase the SAR image quality.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.37-44
• /
• 2002

In this paper. we propose a new video coding scheme with multi-resolution motion compensation and residual quantization. The main functional blocks of the proposed scheme include multi-level wavelet decomposition. motion estimation and motion compensation. raster scanning within each subband. formation of block trees and blocking partitioning. and adaptive arithmetic coding. Although the proposed ceding scheme is simple and requires low computational complexity, it produces bitstreams tilth good features. such as the embedded structure and SNR scalability. Experimental results demonstrate that the proposed coding scheme is quote competitive to and often outperforms other wavelet-based video coding schemes in the literature.

• Journal of Broadcast Engineering
• /
• v.25 no.2
• /
• pp.242-251
• /
• 2020

Recently, many deep convolutional neural networks for image super-resolution have been studied. Existing deep learning-based super-resolution algorithms are architecture that up-samples the resolution at the end of the network. The post-upsampling architecture has an inefficient structure at large scaling factor result of predicting a lot of information for mapping from low-resolution to high-resolution at once. In this paper, we propose a single image super-resolution using Channel Attention Residual Dense Block based on an iterative up-down sampling architecture. The proposed algorithm efficiently predicts the mapping relationship between low-resolution and high-resolution, and shows up to 0.14dB performance improvement and enhanced subjective image quality compared to the existing algorithm at large scaling factor result.

• Journal of Broadcast Engineering
• /
• v.9 no.3
• /
• pp.236-245
• /
• 2004

A multiview sequence CODEC with view scaiability is proposed in this paper. We define a GGOP (Group of GOP) structure as a basic coding unit to efficiently code multiview sequences. 7he proposed CODEC provides flexible GGOP structures based on the number of views and baseline distances among cameras. Multiview sequences encode consists of disparity estimation/compensation, motion estimation/compensation, residual coding and rate control and generates multiview sequence bitstream. The main bitstream is the same as an MPEG-2 mono-sequence bitstream for MPEG-2 compatibility. The auxiliary bitstream contains information concerning the remaining multiview sequences except for the reference sequences. The proposed CODEC with view scalability provides that a number of view flints are selectively determined at the receiver according to the type of display modes. The proposed multiview sequence CODEC is tested with several multiview sequences to determine its flexibility. compatibility with MPEG-2 and view scaiability. In addition, we subjectively confirm that the decoded bitstreams with view scaiability can be Properly displayed by several types of display modes. including 3D monitors.