• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1686-1704
• /
• 2021

This study addresses the numerical simulation of the shield building of an AP1000 nuclear power plant (NPP) subjected to a large commercial aircraft impact. First, a simplified finite element model (F.E. model) of the large commercial Boeing 737 MAX 8 aircraft is established. The F.E. model of the AP1000 shield building is constructed, which is a reasonably simplified reinforced concrete structure. The effectiveness of both F.E. models is verified by the classical Riera method and the impact test of a 1/7.5 scaled GE-J79 engine model. Then, based on the verified F.E. models, the entire impact process of the aircraft on the shield building is simulated by the missile-target interaction method (coupled method) and by the ANSYS/LS-DYNA software, which is at different initial impact velocities and impact heights. Finally, the laws and characteristics of the aircraft impact force, residual velocity, kinetic energy, concrete damage, axial reinforcement stress, and perforated size are analyzed in detail. The results show that all of them increase with the addition to the initial impact velocity. The first four are not very sensitive to the impact height. The engine impact mainly contributes to the peak impact force, and the peak impact force is six times higher than that in the first stage. With increasing initial impact velocity, the maximum aircraft impact force rises linearly. The range of the tension and pressure of the reinforcement axial stress changes with the impact height. The perforated size increases with increasing impact height. The radial perforation area is almost insensitive to the initial impact velocity and impact height. The research of this study can provide help for engineers in designing AP1000 shield buildings.

• Advances in materials Research
• /
• 제6권1호
• /
• pp.65-78
• /
• 2017

A hat section was designed and developed for maximum impact energy absorption and/or transmission under low velocity impact. Towards this, different hat sections, having material properties of thermoplastic, were modeled and investigated numerically using finite element analysis (FEA) in the range of 20-50 J impact energy. In the study it was experienced that the design configuration of hat section with curvilinear profile (HSCP) was excellent in energy attenuation capacity and for even distribution of maximum impact force around and along the hat section under low velocity impact loading. To validate the numerical findings, polypropylene copolymer (Co-PP) HSCP and low density polyethylene (LDPE) HSCP were developed and evaluated experimentally in the said impact energy range. A correlation was established between FEA and experimental test results, thereby, validating a numerical model to predict results for other thermoplastic materials under given range of impact energy. The LDPE HSCP exhibited better performance as compared to Co-PP HSCP in the said range of impact energy. The findings of this study will enable the engineers and technologists to design and develop low velocity impact resistance devices for various applications including devices to protect bone joints.

• Advanced Composite Materials
• /
• 제18권4호
• /
• pp.395-413
• /
• 2009

Impact tests on high-strength membrane materials under biaxial loads were experimentally conducted in order to evaluate influence of biaxial loads on impact fracture of the membrane materials for the inflated applications. Cruciform specimens of the membrane materials were fabricated for applying biaxial loadings during the impact test. A steel ball was shot using a compressed nitrogen gas gun, and struck the membrane specimen. Impact tests on uniaxial strip specimens were also conducted to obtain the effect of specimen configuration and boundary condition on the impact fracture. The results of the measured crack length and the ultra-high speed photographs indicate the impact fracture properties of the membrane fabrics under biaxial loadings. Crack length due to the impact increased with applied tensile load, and the impact damages of the cruciform membrane materials under biaxial loadings were smaller than those of under uniaxial loadings. Impact fracture of the strip specimen was more severe than that of the cruciform specimen due to the difference of boundary conditions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.355-360
• /
• 2000

There are many changed while a design is completed. Therefore, if the impact of the design changes is estimated, it may result in the improvement of design efficiency. But, the design changes have various types and affect other parts of the design system. Hence, it is difficult to deal with design changes directly. The purpose of this research is to develop a systematic change propagation tracing algorithm and a method of change impact analysis and then, to implement a change impact analysis system. Process based design is set up for the field of this research. Also the design, composed of design parameters and constraints, is set up for the subject of the research. Change propagation tracing algorithm traces change propagation based on the following concept : If the design parameters are changed, other parameters within the constrains including them may be changed. Using the result of change propagation tracing algorithm, changeable parameters, constraints and tasks can be found. The method of change impact analysis, to calculate change impact value from this changeable tasks, is developed. Change propagation tracing algorithm and the method of change impact analysis are implemented into change impact analysis system and it is applied to the redesign of 2 stage gear drives. It can support different kinds of design activities systematically. especially, at the redesign step, where many design change alternatives exist, change impact value of each alternative exist, change impact value of each alternative is calculated and design change is performed toward direction to minimize the impact of design change. Consequently, it is expected to improve the efficiency of the whole design.

• 웰빙융합연구
• /
• 제5권2호
• /
• pp.43-50
• /
• 2022

Purpose: The small-scale environmental impact assessment conducted during the development project stage has focused on the preservation of the natural environment centered on non-urban areas, due to the nature of urbanization, health problems for citizens of high-density urban areas have a limitation in that they are relatively neglected. In the case of strategic environmental impact assessment and environmental impact assessment in urban areas, there is no basis for evaluation in urban areas because there are exceptions to be excluded from the target projects or there are no target project regulations for buildings. Therefore, in this research, we examined the problems with the target project such as the current environmental impact assessment, and tried to establish a system improvement plan that can solve them. Research design, data and methodology: After reviewing the current environmental impact assessment-related laws (including enforcement ordinances) and national land planning laws (including enforcement ordinances), exceptions such as environmental impact assessment in urban areas were identified and problems were identified. Based on this, an amendment to the Enforcement Decree was proposed to provide institutional support for the expansion of target projects such as environmental impact assessment in urban areas. Results and Conclusions: Through this research, it is expected that the projects subject to environmental impact assessment on development projects in urban areas directly related to the health of the people will be expanded, and the net function of the environmental impact assessment system will be maximized.

• 환경영향평가
• /
• 제17권2호
• /
• pp.97-103
• /
• 2008

This study presented politic proposals and diverse utilization-type in coastal areas by analyzing results of reviewed related-statements of marine environment during the one year period of 2007 by Marine Environmental Impact Assessment Center. Total of 358 cases were reviewed, which was a significant increase from 270 in 2006. Consultation on the utilization of sea areas (CUSA) accounted for the largest number of 165 (46.1%) and it was followed by 104 cases of environmental impact assessment (EIA) (29.0%) and 89 cases of prior environmental review (PER) (24.9%). As such, evaluation statements (EIA+PER) related to consultations of the Ministry of Environment accounted for approximately 54% of the entire cases reviewed. To analyze the overall results of reviewing marine-related evaluation statements, utilization and planning were conducted by 47.9%, 38.4% and 13.7% in the South Sea, West Sea and East Sea of Korea, respectively. In evaluation statements (EIA+PER), port construction, industrial complex construction, urban management plan and road construction took up most of the part by 40.9%, 20.2%, 10.4% and 7.3%, respectively. In terms of CUSA-statement, it was evaluated that consultations were mostly carried out on use and reclamation of public water surface in coastal areas and on sea aggregate extraction process in EEZ. The largest number of plans for coastal use were established for Jeollanam-do, followed by Gyeongsangnam-do, Chungcheongnam-do, Gyeongsangbuk-do and Gyeonggi-do. In particular, development plans were concentrated on Jeollanam-do and Gyeongsangnam-do with stable marine environment and outstanding view of the nature. In most cases, these regions are adjacent to the areas designated as a sea area for environmental management and fisheries resources protection zone. Therefore, conflicts exist between development and preservation. Also, rather than random development, more detailed marine environmental impact assessment, gathering of public opinions and politic harmony are essentially required. For efficient coastal management and environmentally sound and sustainable development, fulfilling consistent and transparent coastal policies as well as active and reliable decision making to center on coastal environment by management bodies will be important.

• 환경영향평가
• /
• 제3권2호
• /
• pp.1-2
• /
• 1994

• 환경영향평가
• /
• 제6권2호
• /
• pp.205-208
• /
• 1997

• International Journal of Knowledge Content Development & Technology
• /
• 제8권1호
• /
• pp.5-23
• /
• 2018

There have been extensive studies done on webometrics, particularly on the impact of websites and the web impact factor. The present study analyzed the websites of ICAR organizations, according to the webometrics indicator. It examines and explores the 92 ICAR organizational websites in India and identifies a number of web pages and link pages, and calculates the Overall Web Impact Factor (WIF) and Absolute Web Impact Factor (WIF). In this study, all websites were analyzed and data extracted using Google search engine. It suggests that Web Impact Factors can be calculated as a way of comparing the attractiveness of web sites or domains on the Web.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권1호
• /
• pp.30-36
• /
• 2003

Brittle materials such as glasses and ceramics, which are very weak under impact loading, show fragile failure mode due to their low fracture toughness and crack sensitivity. When brittle materials are subjected to impact by small spheres, high contact pressure occurs at the impacted surface causing local damage on the specimen. This damage is a dangerous factor in causing the final fracture of structures. In this research, the crack propagation process of soda-lime glass by the impact of small spheres is explained and the effects of several constraint conditions for impact damage were studied by using soda-lime glass; that is, the effects for the materials and sizes of impact ball, thickness of specimen and residual strength were evaluated. Especially, this research has focused on the damage behavior of ring cracks, cone cracks and several other kinds of cracks.