• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.398-409
• /
• 2020

Objectives: This study aimed to evaluate environmental exposure to tobacco-specific nitrosamines (TSNAs) by conducting an analysis of the concentration of TSNAs in deposited dust collected from a fertilizer plant and the surrounding village, a simulation of high-temperature drying of tobacco waste, and CALPUFF modeling. Methods: The raw materials of the products, deposited dust (inside and outside the plant and residential area), soil, and wastewater were sampled and the TSNA concentrations were analyzed by LC-MS/MS. As the plant was closed down before the investigation, simulation tests were conducted to confirm the substances discharged during high-temperature (300℃) drying of tobacco waste. CALPUFF modeling was performed to identify the area of influence due to exposure to TSNAs. Results: TSNAs were detected in organic fertilizers estimated to contain tobacco waste, deposited dust, and soil collected from inside and outside the plant. N'-nitrosonornicotine (NNN), 4-(methylnitrosoamino)-1-(3-pyridyl)-1-butanone (NNK), and N'-nitrosoanatabine (NAT) components were detected in five of 15 deposited dust samples collected from the residential area around the plant, while TSNAs were not detected in the five sampling points in the control area. Also, the simulation test for the high temperature drying of tobacco waste found emissions of TSNAs. The CALPUFF modeling results showed that the survey area was likely to be included in the area of influence of TSNA emissions from the plant. Conclusions: It is estimated that harmful tobacco ingredients such as TSNAs were dispersed in nearby areas due to the illegal use of tobacco waste as a raw material to produce organic fertilizers at the plant. These findings assume that the residents have been exposed to TSNAs and suggest that the need for the establishment of measures to manage environmental health.

• Nuclear Engineering and Technology
• /
• v.42 no.5
• /
• pp.576-581
• /
• 2010

KAERI (Korea Atomic Energy Research Institute) fabricated MOX (Mixed Oxide) fuel pellets as a cooperation project with PSI (Paul Scherrer Institut) for an irradiation test in the Halden reactor. The MOX pellets were fitted into fuel rods that included instrumentation for measurement in IFE (Institutt for Energiteknikk). The fuel rods were assembled into the test rig and irradiated in the Halden reactor up to 50 MWd/kgHM. The irradiated fuel rods were transported to the IFE, where ceramography was carried out. The fuel rods were cut transversely at the relatively higher burn-up locations and then the radial cross sections were observed. Micrographs were analyzed using an image analysis program and grain sizes along the radial direction were measured by the linear intercept method. Radial cracks in the irradiated MOX were observed that were generally circumferentially closed at the pellet periphery and open in the hot central region. A circumferential crack was formed along the boundary between the dark central and the outer regions. The inner surface of the cladding was covered with an oxide layer. Pu-rich spots were observed in the outer region of the fuel pellets. The spots were surrounded by many small pores and contained some big pores inside. Metallic fission product precipitates were observed mainly in the central region and in the inside of the Pu spots. The average areal fractions of the metallic precipitates at the radial cross section were 0.41% for rod 6 and 0.32% for rod 3. In the periphery, pore density smaller than 2 ${\mu}m$ was higher than that of the other regions. The grain growth occurred from 10 ${\mu}m$ to 12 ${\mu}m$ in the central region of rod 6 during irradiation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.8
• /
• pp.1188-1193
• /
• 2005

An investigation was carried out to study the effect of two housing systems on physiological responses and energy expenditure of sheep in a semi-arid region of India. Two types of housing management were adopted. First was a shed- $6{\times}3\;m^2$ structure with all the four sides of 1.8 m chain link fencing with a central height of 3 m. The roof was covered with asbestos sheets and with mud floorings. Second was an open corral- $6{\times}3\;m^2$ open space with all the four sides covered with 1.8 m chain link fencing. Thirty-four (32 ewes and 2 rams) sheep of native Malpura breed aged about 18 months (body weight 28 kg ewes; 35 kg rams) were grazed together on a 35 ha plot of native range. All the sheep were grazed as a flock from 08.00 to 17.00 h during a yearlong study. The flock was divided into two groups (16 ewes+1 ram) in the evening and housed as per the systems (Shed and Open Corral). Dry and wet temperatures were recorded at 06.00 h and 21.00 h using a wet and dry bulb-thermometer both inside the shed and in the open corral and temperature humidity index (THI) was calculated. There was significant (p<0.05) difference in the THI between shed and open corral in all the seasons, indicating that shed was always warmer compared to open corral. Rectal temperature (RT) of both the groups of sheep was similar during morning as well as evening throughout the seasons. There were significant (p<0.05) differences in the skin temperature (ST) and respiration rate (RR) between the two groups at both the measurements in all the seasons. Highest energy expenditure (EE) was recorded inside the shed at 21.00 h (224 kJ/h) during monsoon and lowest at 6.00 h during winter (119 kJ/h). There was a significant (p<0.05) difference between the EE inside the shed and that in the open corral. It was concluded that housing had significant effects on the physiological responses and EE of sheep. Provision of housing at night was stressful during monsoon (with less rainfall) and summer, whereas it was protecting the sheep from acute cold during winter in a semi-arid region of India.

• Atmosphere
• /
• v.26 no.3
• /
• pp.423-433
• /
• 2016

In this study, performance of a computational fluid dynamics (CFD) model is assessed from analysis on air flow pattern which is observed in the artificial street canyon. Field observations focusing on flows were conducted at an artificial street canyon in Magok region. For the observation of three-dimensional airflow structures, twelve three-dimensional wind anemometers (hereafter, CSAT3) were installed inside the street canyon. The street canyon was composed of two rectangular buildings with 35-m length, 4-m width, and 7-m height. The street width (distance between the buildings) is 7 m, making the street aspect ratio (defined by the ratio of building height to street width) of 1. For the observation of above-building wind, a CSAT3 was installed above the northwest-side building. Southwesterly, westerly and northwesterly were dominant in the street canyon during the observations. Because wind direction is parallel to the street canyon in the southwesterly case, westerly and northwesterly were selected as inflow directions in numerical simulations using a computational fluid dynamics model developed through the collaborative research project between National Institute of Meteorological Sciences and Seoul National University (CFD_NIMR_SNU). The observations showed that a well-structured vortex flow (skimming flow) and an evidence of a small eddy at the corner of the downwind building and ground appeared. The CFD_NIMR_SNU reproduced both the observed flow patterns reasonably well, although wind speeds inside the street canyon were underestimated.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.4
• /
• pp.343-352
• /
• 2017

A space plasma facility has been operated with a back-diffusion-type plasma source installed in a mid-sized vacuum chamber with a diameter of ~1.5 m located in Satellite Technology Research Center (SaTReC), Korea Advanced Institute of Science and Technology (KAIST). To generate plasma with a temperature and density similar to the ionospheric plasma, nickel wires coated with carbonate solution were used as filaments that emit thermal electrons, and the accelerated thermal electrons emitted from the heated wires collide with the neutral gas to form plasma inside the chamber. By using a disk-type Langmuir probe installed inside the vacuum chamber, the generation of plasma similar to the space environment was validated. The characteristics of the plasma according to the grid and plate anode voltages were investigated. The grid voltage of the plasma source is realized as a suitable parameter for manipulating the electron density, while the plate voltage is suitable for adjusting the electron temperature. A simple physical model based on the collision cross-section of electron impact on nitrogen molecule was established to explain the plasma generation mechanism.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.479-484
• /
• 2005

Comparison it analyed the tunnel travelling hour interior noise arresting quality of the inside and outside of the country high-speed vehicle from the research which it sees. In the interior sound arresting comparison objective vehicle of the tunnel travelling hour KTX vehicle from the research which it sees and it limited by the TGV vehicle of France and the ICE vehicle og Germany and the Shinkansen vehicle of Japan comparison it analyzed the interior sound arresting from the open field and the tunnel line. The tunnel passage hour interior sound arresting problem of the domestic KTX vehicle follows in the concreate track tunnel the ballast track tunnel and the interior sound arresting quality is appearing different.

• Journal of Haehwa Medicine
• /
• v.10 no.1
• /
• pp.133-148
• /
• 2001

From this book, $\ll$GeumGueyoryak Hakbyeongmaekjeungbyeongchi$\gg$, I finally got these conclusions of symptoms and pathology of Hakbyeong. 1. Hakbyeong has main symptoms of repetition of chillness and fever and its main pulse is pulse of Hyeon(弦) and position is in the middle of inside and outside. 2. Change in shape of pulse caused by Hakbyeong can have shape of pulse of Sak(數), Jee(遲), Kin(緊), Dae(大) and more kinds depending on patients constitution, the cause of disease, or whether he/she has been poisoned by other kinds. 3. After 15 days of symptoms, As Cheonki(天氣) and Inki(人氣) get stronger and Saki(邪氣) gets weaker, Jeongki(正氣) can be more recovered and the diseases can be disappeared. But if the disease dose not get away after another 15 days of showing symptom, that disease can be treated as cutting the Jingha under side of him/her. 4. The type of Hakbyeong which is diseased by the keeping the Haksa for long time, can be classified as Hagmo which has symptoms of chillness and fever outside, and of Jinggha inside, Danhag which has symptoms of difficulty with breathing, chest discomfort - caused by fever in the lung at ordinary times -, fever of extremities and nausea and that would make people worn out and thin after all, Onhag which has main symptoms of fever and Mohag which has symptoms of less fever and more chillness. 5. In this thesis it has been described, the Byulgabjunhwan(鼈甲煎丸), Baekhogagaejitang(白虎加桂枝湯), and Chokchilsan(蜀漆散) is the respective prescription for treatment of Hagmo, Onhag, and Mohag. From this conclusion, if the more research about the cause of disease, pathology and prescription of the each symptom from GeumGueyoryak hereafter, I could say more effective prophylaxis and treatment of epidemic disease like todays Hakbyeong can be found.

• Membrane Journal
• /
• v.13 no.4
• /
• pp.257-267
• /
• 2003

For the treatment of reactive phenolic resin waste, a simulation model of pervaporative dehydration process has been developed through hollow fiber membrane module. Some of basic parameters were determined directly from dehydration of the waste liquid through a flat sheet membrane to get realistic values. The simulation model was verified by comparing the simulated values with experimental data obtained from hollow fiber membrane module. Hollow fiber membranes with active layer coated on inside fiber were used, and feed flew through inside hollow fiber. Feed flow rate affected membrane performances and reaction by providing a corresponding temperature distribution of feed along with fiber length. Feed temperature is also a crucial factor to determine dehydration and reaction behavior by two competing ways; increasing temperature increases permeation rate as well as water formation rate. Once the permeate pressure is well below the saturated vapor pressure of feed, permeate pressure had a slightly negative effect on permeation performance by slightly reducing driving force. As the pressure approached the vapor pressure of feed, dehydration performances declined considerably due to the activity ratio of feed and permeate.

• Journal of Haehwa Medicine
• /
• v.19 no.1
• /
• pp.87-98
• /
• 2010

There are four kinds of diagnosis methods in oriental medicine, and viewing diagnosis(望診) is the most important method among them. There are two ways in viewing diagnosis. These are viewing shape(觀形) and inspecting color(察色). Viewing shape diagnosis includes observation on geometric curve that is made by prominence of bones or lump of flesh, and examination on symmetric disparity and balance of vertical length among three vertical section of face. Inspecting color is literally inspecting several specified region of face. By Viewing shape, we can learn about characteristic physical mechanism of individuals, and basic disposition of reaction from inside and outside infinite stimulations. On the other hand, by inspecting color, we can estimate the very present pathologic and physiologic status of the patient. the estimation is based on principle that inside body changes reveal some reflections on facial skin surface. When you diagnosis patients with inspecting color method, It is important to distinguish color delicately, and to know where to see and what to know from it. The most important and frequently mentioned regions are myong-dang(明堂), eyes(眼) and In-dang(印堂). Myong-dang(明堂) indicates nose. In-dang(印堂) indicates the space between eyebrows. Unlike myong-dang(印堂) and eyes, In-dang(印堂) is occasionally treated as a trivial region then others. But, from research on classical books of facial examination and consideration of it's locational meanings, we've learned In-dang(印堂) is very important in viewing diagnosis, because this region is crossing of the other two regions and this fact means this region expresses the spiritual status as well as physical status in one region.

• ETRI Journal
• /
• v.19 no.4
• /
• pp.326-343
• /
• 1997

In this paper, we propose an ATM switch with the rate more than gigabits per second to cope with future broadband service environments. The basic idea is to separate the connection control flow from the data information flow inside the switch. The proposed switch has a dual-plane switch matrix with the synchronous control algorithm. The queuing behaviors of the proposed switch are shown by the discrete-time queuing analysis. Numerical analyses are taken both in the non-blocking crossbar switch and the banyan switch with internal blocking. Results show that a proposed dual-plane $16{\times}16$ switch would have the acceptable performance with maximum throughput of about 95 percent.