• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6163-6172
• /
• 2013

This study examined the job competence of the staff at the center for teaching and learning(CTL) in university and to find out the level of job competence, which has been asked to the staff of the CTL. For that, the factor of the job competence, which is required of the staff of the CTL, was inquired through a literature review. Based on the job competence, this study examined the required job competence of the staff in Daejeon city and Chungnam province. The result suggests that the job competence required of staff are the basic job competence, planning-analysis job competence, management job competence for the project, and evaluation job competence. The first factor in basic job competence is the attitude to change and innovation. In the planning-analysis job competence, the first factor is an analysis and consultation of instruction. In managing the job competence for the project, the first factor is the management of human resources, and the first factor in evaluating the job competence is an evaluation of the effectiveness of the media. Therefore, to revitalize the CTL, there is a need to organize an expert pool, plan and support program that is suitable for professional development.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.463-472
• /
• 2003

Interactions between factor Va (HFVa) and membrane phosphatidylserine (PS) regulate the activity of the prothrombinase complex. I have previously shown that two solvent exposed hydrophobic residues located in the C2-domain, Trp2063 and Trp2064, are required for binding to immobilized PS and for expression of procoagulant activity on membranes containing 5% PS. In order to fully define the functional importance of these two residues I have expressed and isolated recombinant factor Va (rHFVa) W2063A/W2064A double mutant. In contrast to the native protein the two glycoforms resulting from alternative glycosylation of Asn2181 eluted as a single peak with rHFVa1 W2063A/W2064A eluting on the leading edge and rHFVa2 W2063A/W2064A eluting on the trailing edge. The double mutant rHFVa2 W2063A/W2064A expressed little or no procoagulant activity on membranes containing 1-10% mol % PS. In contrast, the procoagulant activity of this mutant was slightly greater than the native protein on membranes containing>18 mol % PS. The binding of rHFVa2 W2063A/W2064A to immobilized phospholipid vesicles was markedly reduced compared to the native protein in a surface plasmon resonance binding assay. I conclude that Trp2063 and Trp2064 are required for high affinity binding of factor Va to PS membranes and that this interaction is necessary for assembly of the prothrombinase complex on membranes containing physiological concentrations of PS.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.252-259
• /
• 2005

Various problems such as increase of power loss and voltage instability may often occur in the case of low load power factor. The demand of reactive power increases continuously with the growth of active power and restructuring of electric power companies makes the comprehensive management of reactive power a troublesome problem, so that the systematic control of load power factor is required. In this paper, the load power factor sensitivity of generation cost is derived and it is used for effectively determining the locations of reactive power compensation devices and for enhancing the load power factor appropriately. In addition, voltage variation penalty cost is introduced and integrated costs including voltage variation penalty cost are used for determining the value of load power factor from the point of view of economic investment and voltage regulation. It is shown through application to a large-scale power system that the load power factor can be enhanced effectively using the load power factor sensitivity and the integrated cost.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.1-8
• /
• 2020

In recent years, hydrogen has received much attention as an alternative energy source to fossil fuels. In order to ensure safety from the increasing number of hydrogen refueling stations, prevention methods have been required. In this regard, this study suggested an approach to reduce the risk of hydrogen refueling station by increasing Safety Integrity Level (SIL) for a Steam Methane Reformer (SMR) in On-Site Hydrogen Refueling Station. The worst scenario in the SMR was selected by HAZOP and the required SIL for the worst scenario was identified by LOPA. To verify the required SIL, the PFDavg.(1/RRF) of Safety Instrumented System (SIS) in SMR was calculated by using realistic failure rate data of SIS. Next, several conditions were tested by varying the sensor redundancy and proof test interval reduction and their effects on risk reduction factor were investigated. Consequently, an improved condition, which were the redundancy of two-out-of-three and the proof test interval of twelve months, achieved the tolerable risk resulting in the magnitude of risk reduction factor ten times greater than that of the baseline condition.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2004.10a
• /
• pp.52-53
• /
• 2004

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.196-198
• /
• 2003

The low load power factor causes various problems such as the increase of the power loss and the voltage instability. The demand of reactive power increases continuously with the growth of active power and the restructuring of electric power companies makes the integrated management of ractive power troublesome, from which the systematic control of load power factor is required. In this paper, the load power factor sensitivity of the generation cost is derived and its effects in supplying the reactive power and enhancing the load power factor are analyzed in a small-scale power system. The load power factor sensitivity of the generation cost is applied for determining the locations and capacities of reactive power compensation devices. It is shown that the generation cost can be reduced and the system power factor can be enhanced effectively using the load power factor sensitivity.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.153-155
• /
• 2004

Various problems such as the increase of the power loss and the voltage instability may often occur in the case of low load power factor. The demand of reactive power increases continuously with the growth of active power and the restructuring of electric power companies makes the integrated management of ractive power a troublesome problem, so that the systematic control of load power factor is required. In this paper, the load power factor sensitivity of the generation cost is used for determining the locations of reactive power compensation devices effectively and for enhancing the load power factor appropriately. In addition, the integrated costs are used for determining the value of the load power factor from the point of view of the economic operation. It is shown through the application to a large-scale power system that the system power factor can be enhanced effectively and appropriately using the load power factor sensitivity and integrated costs.

• Korean Institute of Interior Design Journal
• /
• v.25 no.4
• /
• pp.105-112
• /
• 2016

Nurses in a children's hospital have to meet a special condition with their younger patients who need continuous supervision and cares. The planning of the ward where the nurse as well as the patient and his/her caregivers stay all day long should cover all the users need. This study focused on the nurse's need for the ward in children's hospital. The nurse stay longer than any users in hospital and their treatment have to be based on deep understanding of their patients. The survey research followed the literature review on the children's hospital and the nurses' task and behavior. 119 nurses answered the structural questionnaire and their answers were analyzed using the statistical process such as basic descriptive statistics, ANOVA, and actor analysis. Results and conclusions are as follows. (1) The subjects least satisfied with the accessibility for the children and the nature-and child-friendly design features among physical environment design factors of the hospital. (2) The Subject regarded the patients' room to a private place of the patients and their caregivers not to the work places. (3) The design factors of the nursing station were classified into four: the functionality-, the privacy-, the supervision-and the restfulness-factor. The functionality and supervision factor were highly required as a workplace, the privacy factor between the patients, their caregivers and subject were also represented high score, but the restfulness factor were least required.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.11
• /
• pp.5-16
• /
• 2008

Field monitoring data of nine sites were investigated to suggest an evaluation method on lateral movement of the quaywall on soft grounds. It was found that in order to evaluate the lateral movement of quaywalls with foundation piles such as the landing pier, the safety factor of slope should be applied with consideration of the stabilizing effect of the piles. If the required safety factor of slope is greater than 1.6 in slope stability analysis with consideration of the stabilizing effect of the piles, the quaywalls are considered to be safe against lateral movement. On the other hand, for the gravity-type quaywalls such as the caisson type quaywall, the required safety factor of slope should be greater than 1.3.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.405-411
• /
• 2014

It needed the calculation of the required tugboat's power to move the damaged vessel to the safe area for reducing the additional damages. In this paper, it was verified the theoretical calculation method on the required power of tugboat through the 93m real ship tests. From the experiments, it was considered that the theoretical calculation method was sufficient to estimate the required power of tugboat. The resistance of the locked propeller was relatively big portions compared with other static resistances such as air resistance, frictional resistance and residual resistance. And dynamic resistance induced by swing movement and yawing was continuously occurred and it also was great effects on the total resistance. In the future, the safety factor will be considered and the exact prediction of ship's resistance will enhance the efficiency of tugboat because of the minimization of safety factor.