• 한국콘텐츠학회논문지
• /
• 제5권5호
• /
• pp.145-151
• /
• 2005

MPEG II 비디오 스트림과 오디오 AC-3 스트림, 자막 스트림에 지역 코든 복제 방지 메뉴 등을 프로그램 하여 하나의 스트림으로 만들고, 시나리오에 따라 속성, 명령 및 작동을 부여하여 최종 디스크 이미지(DVD)를 만드는 과정을 오소링(Authoring)이라고 한다. 이러한 오소링(Authoring) 툴들은 다양하게 출시되어 있는데, 간단한 타이틀을 만드는 보급형부터 전문적인 영화 타이틀을 만드는 고급형까지 용도에 따라 선택하여 쓸 수 있다. 본 논문에서는 일반적인 IEEE 1394포트를 이용하여 영상과 음향을 컴퓨터로 캡처(Capture)해서 DVD를 만드는 오소링(Authoring) 과정을 일반인들이 Desktop PC로써 가장 많이 사용하고 있는 Window체계의 PC와 OSX 체계의 Macintosh를 중심으로 비교, 분석하고자 한다.

• 제어로봇시스템학회논문지
• /
• 제16권3호
• /
• pp.300-304
• /
• 2010

This study was performed to development a dental three-dimensional laser scanning system and measure the accuracy of new adjustable upper dental impression tray. The metal stock, individual, and new adjustable stock trays were used for 30 stone casts(10 casts each) duplicated a resin master model of maxilla. The dental stone was poured in a vinyl polysiloxane impressions and allowed to set for on hour. The master model and the duplicated casts were digitized using an dental scanning system. The distance between the reference points were measured and analyzed on the graphic image of 3D graphic software of CATIA. The statistical significance of the differences between the groups was determined by a two-way ANOVA. There were no significant differences between the accuracies of the adjustable stock tray and the master model except only anterior arch width on the upper arch. The adjustable upper stock tray showed clinically acceptable accuracies of the study cast produced by them.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.394-397
• /
• 1999

The relation between the paper formation analyzer by image process system and smoothness, compressibility uniform of ink absorption is studied. There results indicate that the paper with bad formation has higher apparent bulk than the paper with good formation. The bad formation of paper results in the nonuniform calendering and decrease of the compressibility. The bad formation of paper also results in deformation and omission of printing dots, which affects the reproduction of the printing images.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.55-63
• /
• 2011

The convex printing plate in particular securities is classified three physical properties. The main ingredient(component)of photosensitive plastic is composed of thermosetting polyamide. After being hardened specimen at $80^{\circ}C$ is shown to resist highly, the Glass Transition Temperatures of photosensitive plastic are $85^{\circ}C$. When hardened plate has reached at $80^{\circ}C$, abrasion loss is minimized. the cause is considered it is more effective in hardening when the temperature of photosensitive plastic is $80^{\circ}C$-the vitrification temperature of those. The hardness and the durability of the convex printing plate in particular securities are affected to the hardening treatment temperature. And the resolution of original drawing has being better when the durability is superior.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.13-27
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printablility of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular weight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.121-131
• /
• 1998

The object color does not look same under the different light source. It depends on the surface spectral reflectance and the spectral distribution of light source. Therefore we should find the surface spectral reflectance of object color and the spectral distribution of light source for color reproduction. Using Wiener estimation, we can estimate the spectral reflectance from low dimensional images obtained with multi-band image acquisition system. The kind and the number of imaging filters have the effect on the estimation of the spectral reflectance. Therefore it is important that optimal filters are selected to minimize the error of the result. In this paper, we describe methods to select optimal filters with minimum error between measured and estimated surface spectral reflectance and to estimate surface spectral reflectance of Munsell color chart from six multi-band images by using Wiener estimation.

• 제어로봇시스템학회논문지
• /
• 제6권6호
• /
• pp.514-521
• /
• 2000

In this study, a surface generating system with a bundle of wires, which can reproduce a certain range of surface roughness of the objects without direct machining process, is implemented. The system consists of a bundle of wires, a PZT actuator, a vertical table system actuated linearly along two perpendicular axes, and an image processing system. Through the development of the operational software for all of those subsystems by a common language(Visual C＋＋) of the implemented system, the complete process except arrangement of a bundle of wires are automated. Lastly, through the experiments of generating the flat surface of some virtual object and then of measuring the reproduced surface roughness, it is confirmed that the implemented system has excellent performance.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.83-100
• /
• 2004

In this paper, the quantity of dot gain in off-set printing is estimated by using the method of UCR(under color removal) and GCR(gray component replacement) and the degree of dot gain is researched through measurement of dot coverage of each color patch at the output film that is variously applied to discretionary quantity of dot gain each line in screen in the printing for the process of color separation and at the offset printing. Also, the best appropriate quantity of dot gain treatment is examined by printing each line in screen for reproduction of colors.

• 한국광학회지
• /
• 제10권5호
• /
• pp.379-385
• /
• 1999

칼라 CRT(cathode ray tube) 모니터의 화면밝기와 명암대비 레벨에 따른 화질 특성을 연구하였다. 화면밝기와 명암대비 레벨을 변화시키면서 SQRI(square root integrals)를 측정하여 시감효과를 고려한 분해능을 조사하였다. 또한 이들 레벨에서 삼색 채녈의 색도 좌표와 휘도를 측정하여 채널의 색도 좌표 일정, 색재현 영역, 그리고 채널의 독립을 만족하는 흰색의 최대 휘도를 분석하였다. 결과를 바탕으로 최적의 분해능과 색재현 특성을 가지는 화면 밝기와 명암대비 레벨을 제시하였다.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.72-78
• /
• 2022

The aim of this research is to improve the effectiveness of digital media advertising because current advertisements -in digital signage - indiscriminately appeals to the general public rather than to a specific target. In order to deliver efficient and customized advertisement information, an IoT human body detection sensor mounted on digital signage detected human faces and then classified them firstly by gender. The digital signage here is a smart digital signage that can analyze facial signals, discriminate them based on patterns, and apply the extracted data by displaying the corresponding information to the user. In addition, by identifying the customer's location approaching the smart digital signage and displaying the optimized content information for the customer's location through an algorithm, the digital signage can dramatize the advertisement Thus, this is a study meant forimproving information efficiency while reducing noise and driving power waste generated from unnecessary digital information reproduction.