• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.229-235
• /
• 2010

In this study, fire resistance performance of high strength concrete specimen with fireproof gypsum board was investigated for possible use in upgrading fire-resistant performance of the existing building and repair of fire damaged structures. Fire test of eight identical high strength concrete columns were carried out for 180 minutes in accordance with ISO-834. The temperature distributions in longitudinal reinforcement and concrete temperature at various depths were recorded. The fireproof performance of gypsum board and explosive spalling of concrete were observed. The specimens with 15 mm thick twoply fireproof gypsum board spalled after gypsum board crumbled regardless of fastening methods. However, when the thickness of fireproof gypsum board was more than 30 mm, it was possible to prevent the explosive spalling and control the rebar temperature. Although the effect of cover thickness could not be compared because the explosive spalling occurred, there seemed to be no difference in insulation efficiency.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.569-580
• /
• 2008

If slope height was more than 20 meters, we conducted an analysis of stereographic projection and limit equilibrium at this slope. We proposed reduction of slope face angle and reinforcement of rock bolt depending on analysis. Blasting design : Standard pattern based on result of local test blasting was made for blasting design. Vibration criterion was set for less than 3.0mm/s because of outworn buildings and inhabitants opinions. Production blasting and Controlled blasting has been done as Construction standard pattern. After Vibration Monitoring has been done, so that we can control of complement. "Bidding Document" and AASHTO 2001 "A Policy on Geometric Design of Highways and Streets" were so for design criteria of earthwork but they were different actual design criteria and left something to be desired in Afghanistan. Therefore, although "Bidding Document" and "AASHTO 2001" were basic design criteria, domestic design criteria was reflected in this design criteria for complement by discussion with supervisor. Drainage design : For stability ratio, ditch of arch block and stonework was designed by rainfall data for the 13 years and discussion with supervisor. Pavement was designed as flexible pavement. Because these days in Afghanistan postwar repair works, especially urgent repairing of roads and newly making of roads, are very highly in progress, I think that Afghanistan is the region about which our construction technical experts should have great concerns.

• Smart Structures and Systems
• /
• v.17 no.1
• /
• pp.91-105
• /
• 2016

One of the most commonly used techniques to strengthen steel reinforced concrete structures is the application of externally bonded patches in the form of carbon fiber reinforced polymers (CFRP) or recently, textile reinforced cements (TRC). These external patches undertake the tensile stress of bending constraining concrete cracking. Development of full-field inspection methodologies for fracture monitoring are important since the reinforcing layers are not transparent, hindering visual observation of the material condition underneath. In the present study acoustic emission (AE) and digital image correlation (DIC) are applied during four-point bending tests of large beams to follow the damage accumulation. AE helps to determine the onset of fracture as well as the different damage mechanisms through the registered shifts in AE rate, location of active sources and change in waveform parameters. The effect of wave propagation distance, which in large components and in-situ can well mask the original information as emitted by the fracture incidents is also discussed. Simultaneously, crucial information is supplied by DIC concerning the moments of stress release of the patches due to debonding, benchmarking the trends monitored by AE. From the point of view of mechanics, conclusions on the reinforcing contribution of the different repair methodologies are also drawn.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.202-216
• /
• 1999

The deep foundation is frequently used for the infrastructures. Since the quality control of the cast-in-place concrete foundations such as CIP piles and slurry walls is not so easy as that of the ready made PC(prestressed concrete) piles, it is necessary to get the information on the integrity of the concrete of the foundation. The depth estimation of foundations whose depths are unknown is also very important in repair and reinforcement works or in safety inspection and assessment to the big structures. The cross-hole sonic logging(CSL) system and the single channel reflection seismic measurement system were developed to test the integrity of pile. The former is well applied to CIP structures, while the later to all kinds of piles with less accurate result compared to that of CSL. To estimate the depth of the deep foundations, parallel seismics, borehole RADAR, and borehole magnetics can be used.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.119-127
• /
• 2013

In cases of wooden structure and wooden house installed on the outside, metal goods used for basic connection are usually screw bolts, strainless nails and general iron nails. As metal connections on wood are directly exposed to exterior environment, friction resistibility of nails on metal connections declines and continual defects on this are generated and maintenance for it is required. However, experiments and analyses for preparing basic data for improvement of the problems have been not conducted so far and wooden structures with defects are abandoned. Accordingly, by analyzing friction resistibility of connections by each kind of woods and metal goods, the study aims to suggest to use metal goods appropriately by kinds of woods and manufacture conditions with analysis on characteristics of resistibility of extracting nails for solving such problems and to secure basic data for establishing maintenance, repair and reinforcement plans.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.285-285
• /
• 2015

댐 및 저수지 시설물은 노후화나 안전성 미확보로 인한 파손 또는 붕괴 발생 시 하류부에 막대한 인명과 재산피해 등 치명적인 결과를 초래하게 된다. 이러한 대형 안전사고를 예방하고자 시설물의 안전관리에 관한 특별법에서는 댐 시설물을 규모별로 1, 2종 시설물로 구분하고, 이에 대해 주기적으로 안전점검 및 정밀안전진단을 실시하도록 제도화하는 한편 진단 결과에 따라 보수 보강 등의 안전조치를 의무화하고 있다. 구조물 결함에 따른 보수 보강은 보수재료와 공법 선정시 공법의 적용성, 구조적 안전성, 경제성 등을 종합적으로 검토하여 결정하여야 한다. 손상 부위에 대한 보수 보강은 제한된 예산과 인력을 효율적으로 투자하기 위해 보수재료 및 공법의 선정 뿐만 아니라 보수 보강이 이루어져야 하는 부재에 대한 우선순위를 산정하는 것이 최우선적으로 선행되어야 한다. 안전점검 및 정밀안전진단 세부지침에서는 보수 보강 대책 마련 시안전점검 및 정밀안전진단 결과를 기초로 하여 적정 재료 및 공법을 선정하고, 보수 보강의 수준 및 우선순위를 결정하도록 명시되어 있다. 하지만 우선순위 결정에 대한 가이드라인이 부재하여 불필요한 시공과 비효율적인 예산 투입으로 인해 국가예산의 낭비되고 시설물의 안전까지 위협받게 되는 경우가 발생하고 있다. 따라서 본 연구에서는 시설물의 상태에 따른 적절한 보수 보강 필요성을 판단하고 보수 보강 수준 및 우선순위를 결정하기 위한 방법론을 개발하였다. 댐 시설물에 대한 안전점검 및 정밀안전진단의 종합평가는 평가대상 개별시설에 대하여 상태 평가 및 안전성 평가를 실시한 후 그 결과에 의해 산출된 상태평가지수와 안전성평가지수를 비교하여 평가단계별로 그 결과를 취합하여 종합평가를 실시하고 있다. 따라서 상태평가에 의해 산정된 종합평가 결과를 이용하여 개별 부재의 상태평가값 산정을 위해 하부 단계의 가중치 및 평가 지수 역산하고, 재산정된 가중치 및 평가지수를 이용하여 각 부재에 대한 보수 보강 우선순위를 산정하고자 하였다. 개발된 방법론은 점검 진단 책임기술자 및 시설물 관리주체 담당자가 댐 시설물의 개별부재에 대한 보수 보강 실시 여부를 판정할 수 있는 기준으로, 보수 보강에 대한 정책 결정시 경제성을 고려한 신뢰도 있는 기준으로 활용될 수 있을 것으로 기대된다.

• Journal of the Korean Geophysical Society
• /
• v.4 no.1
• /
• pp.1-10
• /
• 2001

A number of tangible cultural properties have been left to suffering damage without any scientific conservation or maintenance. We conducted nondestructive geophysical explorations around the Western pagoda of the Iksan Mireuksa Temple for the purpose of preparing the counterplan of its conservation and maintenance and of utilizing the geophysical information for the design of repair. Geophysical image of the shallow subsurface around the construct resulting from electric resistivity, seismic refraction, and GPR methods carried out along 6 lines in the site was used to investigate the relationship between the foundation characteristics and the structural safety. Tilting of the pagoda southwest towards seems to result from the low resistivity zones found in the southwestern part. The GPR and seismic surveys revealed a boundary at depth of 3.3～3.5m dividing into two layers, compacted overlaid soil and the original ground. The boundary appears to dip southwest. The artificial layer as a foundation does not covers as much as the bottom area of the pagoda. This top soil dipping southwest seems to result in tilting of foundation southwestward towards. Our geophysical result suggests ground reinforcement in the western part of the survey area for the conservation of the construct.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.97-106
• /
• 2019

Today, many smart sensor's measurement instruments are used to check the safety situation of various medium and large bridge structures that should be maintained in the construction facilities, but most of them use the method of measuring and confirming the displacement behavior of the bridge at regular intervals. In order to continuously check the safety situation, various measuring instruments are used, but most of them are not able to measure and measure the displacement and behavior of main construction structures at regular intervals. In this study, GNSS and environment smart sensors and drone's image data are transmitted to wireless network so that risk of many bridge's structures can be detected beforehand. As a result, by diagnosing the fine displacement of the bridge in real time and its condition, reinforcement, repair and disaster prevention measures for the structural parts of the bridges, which are expected to be dangerous, and various disasters and accidents can be prevented, and disaster can be prevented could suggest a new alternative.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.1159-1168
• /
• 2020

The conduits of agricultural reservoirs undergo deterioration over a considerable period of time and this is highly likely to cause structural problems such as cracks. It is therefore important to consider the effects of structural defects on the body from the viewpoint of stability and maintenance of the embankment. In this study, basic data on the effects of the crack location on the stability of the embankment is obtained by identifying, comparing, and analyzing the erosion characteristics and pore water pressure behavior through a large-scale model experiment that involves classifying the location of the conduit cracks. From the results of the experiment, it was confirmed that when a crack occurred, the amount of leakage increased as the location of the crack portion was closer to the water level, and the internal erosion phenomenon accelerated, thereby increasing the possibility of piping. It was also found that an upstream conduit crack affects the erosion and water pressure change of the central and downstream conduit of the embankment, and the conduit crack has a very large effect on the pore water pressure despite the low upstream water level. Therefore, the seepage behavior of the embankment for each conduit crack identified in this study is considered to be useful basic data for preparing a repair and reinforcement plan according to the crack location in the future.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.11
• /
• pp.135-144
• /
• 2018

During the Late Joseon dynasty, abandoned mountain fortresses were urgently repaired for the operation of foothold mountain fortresses in Gyeongsang-do, during the Japanese Invasion of Korea in 1592 and immediately after the Qing Invasion of Korea in 1636. Immediately after the Qing Invasion of Korea, an external fortress wall was built and added to each of Cheonsaeng Fortress and Geumo Fortress to establish a system of protecting locals inside a fortress at important locations for border defense against Japan in the Yeongnam region. Cheonseng Fortress, however, did not have sufficient geographical and protection conditions as a mountain fortress for protecting people inside it; thus, Gasan Fortress was newly built to replace Cheonsaeng Fortress. Geumo and Gasan Fortresses were used in border defense against Japan during the period from King Injo's reign to the end of Joseon Dynasty, because the fortresses served the purpose of defending Nakdonggang River and middle roads located at important roads along the border in the Yeongnam region and because it was possible to quickly repair and use their existing fortress walls and internal facilities, such as middle fortress walls and ponds, that were constructed for long-term protection of locals inside the fortress. In addition, it was found, in this study, that a continuous discussion on how to supplement fortresses led to the reinforcement and improvement of fortress facilities and fortification technology through the application of major strengths of Chinese (Ming) and Japanese fortress systems.