• Journal of Korean Society of Water and Wastewater
• /
• v.8 no.2
• /
• pp.12-24
• /
• 1994

The occurrence of objectionable tastes and odors in drinking water is a common and widespread problem. The most troublesome odors are usually those described as muddy or earthy-musty. Two organic compounds which have been implicated as the cause of earthy-musty odor problems in water are geosmin and 2-Methylisoborneol. These earthy-musty organics have been shown to be metabolites of actinomycetes and blue green algae. The purpose of this paper is to describe adsorbability in removing these two oder causing compounds(geosmin and 2-MIB) upon various conditions like pH variation, adding humic acid and different activated carbon. The conclusion of this study are as followings. In batch test, carbon dosage is 10mg/100ml for geosmin and 15mg/100ml for 2-MIB. Both were in equilibrium state after 60 hours. In model simulation, F-P model described experiment data and modelling data appropriately in geosmin but F-S model not. In case of 2-MIB, models didn't describe relation between experiment and modelling data well. Two causative agents of earthy-musty odor compounds, geosmin and 2-MIB, are strongly adsorbed by activated carbon either coconut or brown. There appears to be no effect of pH (3,7,9) on adsorption of these two organics. Activated carbon proved to be more effective for removing geosmin than for removing 2-MIB. When activated carbon is. used in removing these two organics, the removal of these appeared to be adversely affected by back ground organic compounds, such as humic substances, due to competitive adsorption.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.5
• /
• pp.149-158
• /
• 2006

Current removing process is labor intensive and time consuming, employing a conventional grinding type manual machine. This manual tasks trigger various dangers such as unexpected traffic accidents or explosions of propane gas used for finalizing removing process, leading to health damage and environment pollution by dusts and noxious gases. Accordingly, it is necessity for the development of new alternative equipment. In this paper, we have developed a prototype equipment for road stripe removing made up with a high-pressure water-jet system as a mobile type system. The following shows the results. First, an analysis of the current road stripe removal process showed that it can be divided into a) preparation, b) removal and c) ground finishing. It also showed that the b) removal process requires equipment which can cover the whole process. Second, the study compared between the productivity of the developed equipment and conventional methods, and it obtained 280% productivity improvement compared to the conventional equipment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.4
• /
• pp.44-52
• /
• 2001

This study performed factor analysis for 21 independent variables related to the effect of illumination and suggested the effect by multiple regression analysis on the relationship between the effect of illumination and the satisfaction of use of a dependent variable to find the effect of illumination in urban parks at night and the effect of illumination on the satisfaction of use. The results of this study are as follows; 1) Of the 21 independent variables used to study the effect of illumination in urban parks at night, the impact on safety and possibility of crime was highly. The effects of illumination by factor analysis were abstracted as effects of removing anxiety, securing safety, increasing use. 2) As a result of multiple regression analysis, independent variables influencing satisfaction of use in urban park were proved as effects of removing anxiety, securing safety, increasing identity, preparing atmosphere and increasing use. Also, the effect of securing safety was the most important factor; it showed a level of importance 2 times higher than the effect of removing anxiety, and 7.7 times higher than the effect of preparing atmosphere in relative contribution of the effect of illumination to satisfaction of use. 3) Of the effects of illumination influencing satisfaction of use in urban parks, the effect of securing safety and the effect of increasing visibility were more significant than the effects of removing anxiety, preparing atmosphere and increasing use. This fact means that personal safety an the identity of persons or facilities in the space of use should be considered with priority in planning or designing illumination. Also, it implies hat, for night use in urban parks, lightness of the space is required for general safety of use at parks, and proper illuminance on the activity in the space of use should be required. The subject parks of this study are 8 urban neighborhood parks. The model on the effect of illumination and the satisfaction of use depends on characteristics and conditions of location of he park and user class, so the subject parks and persons should be varied, and the difference by sex or ages should be suggested.

• Journal of Bio-Environment Control
• /
• v.31 no.3
• /
• pp.237-245
• /
• 2022

Peach is a typical summer fruit which can be used for various food, processed food, and fragrance ingredients in Korea. Peach is also known as one of serious allergens which make difficulty for farm workers during peach sorting operations. After peach harvesting, it moves to the sorting operations for removing cover material, removing fuzz on peach surface, sorting by size, and packing. The air-samplers and optical particle counters were used to analyze the characteristics of fine dust generation by location and operation characteristics in the experimental peach farms. During removing peach fuzz, the dust concentrations were increased by 6.89 times on total suspended particulate (TSP), 2.13 times on PM-10 (particulate matter), and 1.30 times on PM-2.5 compared to non-working periods, respectively. During removing peach covering materials, the dust concentrations were increased by 3.14 times on TSP, 1.91 times on PM-10, and 1.43 times on PM-2.5 compared to non-working periods, respectively. This represents peach fuzz can be affected to farm workers during peach sorting operations.

• Journal of the Korean Society of Safety
• /
• v.39 no.2
• /
• pp.1-8
• /
• 2024

Unwanted effects of electrostatic phenomena occur in various industries. Electrostatic problems originating from the human body in flammable atmospheres in the industry are especially concerning. A substantial volume of experimental data on the electrostatic charging voltages created on the human body owing to the rubbing of apparel were generated and reviewed during this study. The data were reviewed to determine whether the resultant charging levels of the human body are hazardous in flammable atmospheres. This study was conducted under several conditions, such as different fiber types used in apparel, shoe types, and relative humidities (RHs). The following conclusions were drawn in this study. ① The electrostatic charging levels of the human body owing to the rubbing of apparel increase with the increase in the surface resistances of apparel; however, the electrostatic charging levels may be different depending on the condition of the cloth surface. ② The discharging energy of 1.98-18.5 [mJ] from the human body exceeds the minimum ignition energy of most flammable materials, when removing an overcoat made of polyester, cotton and wool under severe conditions such as wearing height-raising shoes for men. ③ When removing antistatic apparel, the maximum discharging energy of 0.128 mJ from the human body is dangerous if the minimum ignition energy of the flammable material is between 10^-5-10^-4 [J] Grade; however, a minimum ignition energy of 10^-3 J Grade of the flammable material is considered safe. ④ While wearing antistatic shoes, the electrostatic charging voltage generated in the human body when removing an overcoat is 30 V; therefore, wearing such shoes is a suitable countermeasure when handling flammable materials. However, the antistatic abilities of shoes reduce when thick socks are worn. ⑤ As RH increases, the electrostatic charging levels of the human body decrease. ⑥ The electrostatic charging levels of the human body from removing a cotton overcoat can ignite the majority of flammable materials when RH is less than 30% under severe conditions such as wearing height-raising shoes for men.

• Journal of the Korean Institute of Educational Facilities
• /
• v.14 no.4
• /
• pp.75-85
• /
• 2007

The purpose of this study is to find out the characteristics of physical planning elements in the pedestrian malls when cultural events for young ages proved; the planning strategies for the regeneration of the block of Kyungchun-railroad track, which is removing planned in campus surroundings. Local Government' initiation makes possible to make improvement and give administrative and financial support which is sensitive to the existing conditions of railroad for the better living environment. Thus, this research suggests how the block of Kyungchun-railroad track, which is removing planned, as a newly organized pedestrian mall design system can cope with collaborating a board and community, which has in campus surroundings related. This study consists of following four parts; 1. six-case pedestrian mall in campus surroundings in Seoul were analyzed in terms of physical and cultural factors for young ages between university and community. 2. we focused on the analysis of correlation between the physical planning factors and the spatial requirements for cultural event when the pedestrian mall in campus surroundings is designed. The paper's significance lies in that it shows a new direction in urban renewal planning and design which has been made into a pedestrian mall plan through in support of the application to the pilot project compared with previous physical environment.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.4
• /
• pp.179-184
• /
• 2003

The pulsed power system is widely used for many industries and environments. Generally, we call the "RUST", the reddish brown surface, that was made on iron surface or some other metals, when they are contacted by water and air the main substance of rust is oxide-ionization. In other words, the chemical symbol of rust on iron surface is iron oxide(III) hydrate Fe203.nH2O. In this study, we have designed and fabricated our system which has a compact pulse generator with switching MOSFET. Also we have studied the metal-oxide removing characteristics using in the atmospheric arc discharge. It has been investigated their removing characteristics by the change of charging voltage and pulse repetition rates. From this result, we can find out that the removal area Is increased from 3.80 to 8.04[$\textrm{cm}^2$], when pulse duration is increased from 100[pps] to 400[pps]. 400[pps].

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.773-776
• /
• 2009

In this paper, new concept of the diesel fuel processing is introduced for the stable operation of solid oxide fuel cells (SOFCs). Heavier hydrocarbons than $CH_4$, such as ethylene, ethane, propane, and etc., induce the carbon deposition on anode of SOFCs. In the reformate of heavy hydrocarbons (diesel, gasoline, kerosene, and JP-8), concentration of ethylene is usually higher than low hydrocarbons such as ethane, propane, and butane. So, removal of low hydrocarbons (over C1-hydrocarbons), especially ethylene, at the reformate gases is important for stable operation of SOFCs. New methodology as named "post-reformer" is introduced for removing the low hydrocarbons at the reformate gas stream. Catalyst of the NECS-PR4 is selected for post-reforming catalyst because the catalyst of NECS-PR4 shows the high selectivity for removing low hydrocarbons and achieving the high reforming efficiency. The diesel reformer and post-reformer are continuously operated for about 200 hours as integrated mode. The reforming performance is not degraded and low hydrocarbons in the diesel reformate are completely removed.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.344-347
• /
• 2003

Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2$TaF$_{7}$ as feed material, KCl and KF as a diluent in a stainless steel (SUS) bomb, using the method of metallothermic reduction. And we examined various types of after-treatment that affect the high purification of powder. A significant amount of impurities contained in recovered powder was removed in various conditions of acid washing. In particular, 20% (HCl + HNO$_3$) was effective in removing heavy metal impurities such as Fe, Cr and Ni, 8% H$_2$SO$_4$ + 8% $Al_2$(SO$_4$)$_3$ in removing fluorides such as K and F from non-reactive feed material, and 2% $H_2O$$_2$ + 1 % HF in removing oxides that formed during reaction. Significant amounts of oxygen and part of light metal impurities could be removed through deoxidation and heat treatment process. On the other hand, because it is difficult to remove completely heavy metal impurities such as Fe, Cr, and Ni through acid washing or heat treatment process if their contents are too high, it is considered desirable to inhibit these impurities from being mixed during the reduction process as much as possible.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.2
• /
• pp.218-230
• /
• 2020

The single anatomical attribute that has the greatest influence on acoustic scattering from fish is the presence or absence of a swimbladder. This study examined the effect of removing the gas from the swimbladder on the broadband backscattering characteristics of six species of swimbladdered fish: striped beakperch Oplegnathus fasciatus, black scraper Thamnaconus modestus, dark-banded rockfish Sebastes inermis, goldeye rockfish Sebastes thompsoni, black rockfish Sebastes schlegeli and panther puffer Takifugu pardalis. Before and after removing the gas from the swimbladder, the species-specific, frequency-dependent backscattered echo signals from anaesthetized individuals of each fish species were measured at approximately 1° intervals spanning a 90° aspect angle range from -45° (head down) to +45° (head up) using a broadband echo sounder operating at 100-200 kHz. The relationship between the wavelength-normalized backscattering cross section (σ/λ²) and fish length (L/λ) was calculated for each species. The average σ/λ² value for the six fish species at a L/λ range of 19.79-25.85, with a mean of 22.89, was reduced by approximately 52.3% when the gas was removed.