• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.103-114
• /
• 2004

IEC 60300 series, the international standards on reliability management system are newly developed and introduced rapidly worldwide. In order to meet this fast-changing situation, it is necessary to apply them to the Korean industries effectively. It includes the establishment of the infrastructure such as documentation of Korean Standards, introduction of test equipments and test manuals, accreditation of the certification bodies and training of the specialists etc. IEC 60300 is upgraded management system of the ISO 9000 and ISO 14000. In this regard, the Korean companies which were certified with the ISO 9000 or 14000 should endeavor to find new strategies and methods to be certified with IEC 60300. This paper introduces a Quantitative method of estimating the level of the reliability management system by applying the MIR(Maturity Index on Reliability) technique. This enables the estimation of the operation level of the system and can upgrade the maturity level of it.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권3호
• /
• pp.182-190
• /
• 2014

This paper presents new practical accelerated life test plans with different censoring times at three levels of stress for Weibull and lognormal lifetime distributions, respectively. The proposed plans are compared with the corresponding two-level statistically optimal plans and three-level compromise and practical plans. Computational results indicate that new practical plans have been more precise and effective than the existing three-level plans under a constraint of total testing time. In addition, a procedure to determine useful ALT plans is illustrated with a numerical example.

• 품질경영학회지
• /
• 제40권2호
• /
• pp.117-125
• /
• 2012

For the highly reliable products, an accelerated degradation test (ADT) is a useful tool which has been employed in industry to obtain reliability-related information within an affordable amount of time and cost. In an ADT, as all other reliability tests, it is important to carefully design the ADT beforehand to obtain estimates of the quantities of interest as precisely as possible. In this paper, optimal ADTs are developed assuming that the constant-stress loading method is employed and the degradation characteristic follows a Wiener process. Under the constraint that the total cost does not exceed a pre-specified budget, the stress levels, the number of test units allocated to each stress level and the number of measurement (termination time) are determined such that the asymptotic variance of the maximum likelihood estimator of the q-th quantile of the lifetime distribution at the use condition is minimized.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.766-770
• /
• 2011

In this paper, we describe the failure analysis and representation test method that applied high frequency transformer for SMPS through analysing insulation resistance, frequency characteristic, CT analysis, Q-factor atc. And we study the judgement method that a high frequency transformer affects to other beside parts in different condition or environment. According to this method, we devise a plan for the field failure prevent and propose the securing product reliability of high frequency transformer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.133-134
• /
• 2008

This paper describes a testing method to assess the reliability of the epoxy bushing used for the vacuum circuit breaker(VCB). Especially, in order to show the long-term durability of epoxy bushing in a short testing duration, the extremely accelerated electric stress applying test plan was adopted.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1657-1659
• /
• 2005

Test track of the Light Rail Transit(LRT system was developed and organically combined with technologies of power supply system, signal communication system and track structure The purpose of the test track is a acquiring of reliability and stability through a sufficient performance test Therefore, this paper draws up ail management plans for tests of the LRT system

• 산업진흥연구
• /
• 제8권1호
• /
• pp.111-117
• /
• 2023

품질관리를 위한 샘플링검사 방식은 산업계에서 많이 제안되어왔다. 하지만 시간을 염두에 둔 품질인 신뢰성에 대한 샘플링검사 방식은 상대적으로 덜 제시되었으며, 일목요연하게 요약한 문헌도 그리 많지 않은 편이다. 이에 여기에서는 신뢰성 시험 중 대상 제품의 신뢰성 평가척도값이 목표로 하는 값을 만족하는지 확인하기 위한 신뢰성 적합시험의 설계에 대하여 설명한다. 이를 위해 먼저 소비자와 생산자가 모두 만족할 수 있는 조건은 무엇인지 OC곡선의 측면에서 살펴보면서 원하는 수준의 생산자위험과 소비지위험을 만족하는 샘플링검사가 무엇인지 알아본다. 이어서 신뢰성 샘플링검사 방식은 계수형과 계량형의 두 가지 방식이 있으므로 이들에 대해 살펴본다. 구체적으로 계수형 신뢰성 샘플링검사 방식은 대상 제품 중 n개의 시험품을 샘플링하여 일정 기간인 T시간 동안 시험하여 고장발생수가 c개 이하이면 합격시키는 형태이고, 계량형 신뢰성 샘플링검사 방식은 n개의 시험품을 미리 정한 기준의 시험시간 동안 시험하여 얻어진 시험 데이터를 이용하여 MTBF와 같은 신뢰성 평가척도값을 계산한 후 이 값이 일정 기준을 만족하면 합격시키는 형태이다. 계수형이든 계량형 신뢰성 샘플링검사이든 검사표를 이용할 수도 있다.

• Corrosion Science and Technology
• /
• 제11권4호
• /
• pp.129-134
• /
• 2012

UT(Ultrasonic Test), one of the non-destructive tests, is the most common thickness measurement method for evaluating the wear rate in NPPs(Nuclear Power Plants). UT is used widely because it is easy and safe for use. However some amount of error inevitably occurs in attempting to measure the thickness. The error, that could make the thickness data thicker or thinner, may affect estimation of wear rate in pipes. NPPs are composed of a lot of pipes and components. Some of them are tested to check the current status during RFO(Re-Fueling Outage). Reliability analysis of UT is essential for evaluating pipe wear rate and establishing the long-term management plan in NPPs. This paper reviewed the cause of error occurrence and presented the UT data reliability analysis method. Also, this paper shows the application result of reliability analysis to the UT data acquired in NPPs.

• 한국전문물리치료학회지
• /
• 제17권4호
• /
• pp.55-60
• /
• 2010

Clinical measures that Quantify falling risk factors are needed for the accurate evaluation of patients and to plan an intervention strategy. The purpose of this study was to examine the test-retest and interrater reliability of the dynamic gait index (DGI) for persons with Parkinson's disease (PD). A total of 22 idiopathic PD patients were recruited from rehabilitation hospital, Korea in this study. The DGI was assessed in two sessions that were, three days apart. We also measured Berg balance test (BBT) and geriatric depression scale (GDS) for concurrent validity with DGI. Intrarater and interrater reliability (.96 and .98 respectively) for DGI were high. indicating good agreement. The DGI was showed a good positive correlation with the BBS (r=.852). but not GDS (r=-.462). Intrarater and interrater reliability of DGI were high in people with PD. The DGI could be a reliable measure to evaluate functional postural control during gait activities in the PD population, and the ability of DGI to detect real change is acceptable in research and clinical settings.

• 품질경영학회지
• /
• 제49권3호
• /
• pp.341-358
• /
• 2021

Purpose: After product development, a Reliability Demonstration Test(RDT) is performed to confirm that the target life has been achieved. In the RDT, there are cases where the test equipment cannot accommodate all samples. Therefore, this study considers a test method to most economically demonstrate the target life of the product at a certain confidence level when the sample size is larger than the capacity of the test equipment. Methods: If the sample size is larger than the capacity of the test equipment, test equipments may be added or the test time of individual samples may be increased. So the test method is designed to cover this situation with limited capacity. A zero-failure test method is applied as a test method to RDT. To minimize the cost, the test cost is defined and the cost function is obtained. Finally, we obtain the optimal test plan. Results: A zero-failure test method is designed when the sample size is larger than the capacity of the test equipment, and the expected total cost is derived. In addition, the process of calculating the appropriate sample size, test time, and number of test equipment is illustrated through an example, and the effects of model parameters to the optimal solutions are investigated numerically. Conclusion: In this paper, we study a zero-failure RDT with test equipment that has limited capacity. The expected total cost is derived and the optimal sample size, test time, and number of test equipment are determined to minimize the expected total cost. We also studied numerical examples and for further studies, we can relax some restrictions in the test model and optimize the test method.