• 한국해양공학회지
• /
• 제35권5호
• /
• pp.327-335
• /
• 2021

Microcracks can rapidly grow and develop in high-strength steels used in offshore structures. It is important to render these microcracks harmless to ensure the safety and reliability of offshore structures. Here, the dependence of the aspect ratio (As) of the maximum depth of harmless crack (a_hlm) was evaluated under three different conditions considering the threshold stress intensity factor (Δk_th) and residual stress of offshore structural steel F690. The threshold stress intensity factor and fatigue limit of fatigue crack propagation, dependent on crack dimensions, were evaluated using Ando's equation, which considers the plastic behavior of fatigue and the stress ratio. a_hlm by peening was analyzed using the relationship between Δk_th obtained by Ando's equation and Δk_th obtained by the sum of applied stress and residual stress. The plate specimen had a width 2W = 12 mm and thickness t = 20 mm, and four value of As were considered: 1.0, 0.6, 0.3, and 0.1. The a_hlm was larger as the compressive residual stress distribution increased. Additionally, an increase in the values of As and Δk_th(l) led to a larger a_hlm. With a safety factor (N) of 2.0, the long-term safety and reliability of structures constructed using F690 can be secured with needle peening. It is necessary to apply a more sensitive non-destructive inspection technique as a non-destructive inspection method for crack detection could not be used to observe fatigue cracks that reduced the fatigue limit of smooth specimens by 50% in the three types of residual stresses considered. The usefulness of non-destructive inspection and non-damaging techniques was reviewed based on the relationship between a_hlm, a_NDI (minimum crack depth detectable in non-destructive inspection), a_{cr N} (crack depth that reduces the fatigue limit to 1/N), and As.

• Korean Journal of Acupuncture
• /
• 제24권2호
• /
• pp.99-112
• /
• 2007

Objectives : It was to translate three neck and spinal pain disability questionnaires - the Neck Disability Index (NDI), the Neck Pain and Disability Scale (NPDS), and the Functional Rating Index (FRI) - into Korean language, and evaluate the psychometric properties of Korean versions of questionnaires to achieve a good cross-cultural adaptation. Methods : Forty (23 males, 17 females) subjects aged from 15 to 64 years old, participated to examine test-retest reliability. One hundred and eighty (76 males, 104 females) subjects with a primary diagnosis of non-specific neck pain and 81 healthy volunteers were undertaken to examine internal consistemcy, discriminative validity and longitudinal construct validity. Versions of each questionnaire in idiomatic modern Korean were developed using a procedure proposed by Beaton et al. (2000). To assess reliability, the Intraclass Correlation Coefficient (ICC $_{(2,1)}$) was calculated. Internal consistency was evaluated by Cronbach's alpha. Discriminative validity was examined with independent-group t-tests. Responsiveness was tested by calculating the effect size and standardized response mean for each questionnaire and using Pearson' s r and the area under the receiver operating characteristic curve analysis. Results : Test-retest reliability ofthe translated versions of the three disability questionnaires was excellent (ICC $_{(2,1)$ = 0.86-0.90). High internal consistency was found in the three disability questionnaires (Cronbach's alpha ranged from ${\alpha}=0.88$ for the FRI to ${\alpha}=0.96$ for the NPDS and 0.82 for the Short Form McGill Pain Questionnaire(SFMPQ)). the VAS subscale of the SFMPQ was found to be the most responsive of the subscales (ES=1.44, SRM=1.37). The VAS was also the most responsive pain and disability index in internal responsiveness analysis, although disability indices showed marginally better responsiveness when compared with external standards. No floor or ceiling effects were observed. Conclusions : It is concluded that the questionnaires were successfully translated and exhibit acceptable measurement properties, and may suggest that they are suitable for use in clinical and research application.

• 대한한방내과학회지
• /
• 제41권4호
• /
• pp.563-582
• /
• 2020

Objectives: The aim of this study was to develop a Phlegm Pattern Questionnaire for Functional Dyspepsia (PPQ-FD) by modifying a previously developed Phlegm Pattern Questionnaire (PPQ) and to verify its reliability and validity. Further objectives were to obtain the optimal cut-off value for the PPQ-FD for standardization and for clinical use. Methods: The PPQ-FD was developed by extracting the major symptoms of the phlegm pattern in functional dyspepsia and by using the Delphi method to administer a requested importance survey to experts. The reliability, validity, and optimal cut-off value of the PPQ-FD were analyzed by enrolling a total of 60 subjects in this study. Thirty patients were diagnosed with both functional dyspepsia and phlegm pattern and thirty patients were diagnosed with only functional dyspepsia. All participants were requested to fill out the PPQ-FD. Results: No statistically significant differences were detected in the two groups for sex distribution, age, or body mass index. Five of the survey questions negatively affected its reliability; therefore, we decided to exclude those five questions on further inspection. The Cronbach's α coefficient of the revised PPQ-FD was 0.853, and clinical validity was verified. Construct validity was analyzed by factor analysis and identified four factors. Statistically significant positive correlations were found between the revised PPQ-FD and other dyspepsia scales, such as the SQDQ, SSQD, VAS, NDI-K, and FD-QoL scales. The VAS had particularly strong positive correlations with the PPQ-FD. Conclusions: The PPQ-FD developed in this study has fundamental reliability and validity for use as a pattern-diagnosis questionnaire. The PPQ-FD can help to diagnose the phlegm pattern in patients with functional dyspepsia.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1011-1017
• /
• 2023

In this study, the harmless crack size (a_hml) by double shot peening (DSP) using shot balls with different diameters was evaluated on carburized, quenched-tempered SCM822H steel. The minimum crack size (a_NDI) detectable by non-destructive inspection was also evaluated. The relationship between the crack size (a_25,50) that reduces the fatigue limit by 25% and 50% and a_hml was evaluated. The residual stress of DSP was greater in SP_(0.6+0.08) than SP_(0.8+0.08) and appeared deeper in the depth direction. In addition, the hardness below the surface appeared larger. The fatigue limit of DSP increased 2.07 times and 1.95 times compared to non-SP. All a_hml of the DSP specimen was determined at the depth (a). The compressive residual stress distribution affects a_hml, and the a_hml of SP_(0.6+0.08), which has a large compressive residual stress and a high fatigue limit, appeared large. a_hml of SP_(0.6+0.08) introduced deeper than the residual stress of SP_(0.8+0.08) is larger in the range of As=1.0-0.3. Since the residual stress in the thickness direction has a greater effect on a_hml than the residual stress at the surface, it is necessary to introduce it more deeply. The relation of a_hml, a_25,50, and a_NDI were evaluated in the point for safety and reliability.