• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.331-332
• /
• 2015

Since $20^{th}$ century, along with the rapid industrial advancement, the concentrated urban development in specific large cities have made people migrate to those cities, thus causing problems in the power system stability. In case of Korea, more than 40% of the power system demand comes from the consumers in Seoul Metropolitan area and the rate is expected to increase. With the continuous increase of power demand, in order to meet the demand for system reliability improvement, the power system was multi-looped for reliability enhancement, the problem of fault current happened. In this situation, there are several methods for fault current reduction likes current limiting reactor, replacing circuit breaker, splitting busses, etc. But these methods reached its limit, power system needs more fundamental solutions such as grid segmentation. In this paper, we assume grid segmentation already has been progressed using VSC BTB HVDC. Then, this paper discusses operating point of HVDC in metropolitan area considering loss minimization and handy flow control. The simulation is proceeded on 2027 KEPCO system.

• 한국통신학회논문지
• /
• 제33권9C호
• /
• pp.734-742
• /
• 2008

무선통신 채널에서 높은 전송 속도를 가능하게 하는 공간다중화 MIMO 시스템에서 다중화된 신호를 검출하는 것은 어려운 작업이며, 최근 다양한 신호검출 기법들이 개발되었다. 다양한 신호검출기법 중 maximum likelihood detection with QR decomposition and M-algorithm (QRM-MLD), sphere decoding (SD), QOC, MOC와 같은 기법들은 maximum liklihood (ha)기법과 유사한 경판정 달성한다. 그러나 일반적으로 이러한 기법들은 soft output의 신뢰도가 저하되는 문제점을 가진다. 본 논문에서는 기존 신호검출기법들의 soft output 신뢰도를 향상시키는 기법을 제안한다. 모의실험을 통하여 기존의 기법들과 결합시 제안된 방법에 의해 개선된 성능을 얻을 수 있음을 보인다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권2호
• /
• pp.121-138
• /
• 2001

Due to large demand for high speed and great capacity for data transfer, WDM, which uses the wavelength division multiplexing technique, is known as alternative way to satisfy those demand for its flexible network operation and management, easy network expansion with existing networks, and enhancement of efficient data transfer rate. For these reasons, a new high capacity WDM optical communication network plan was established. Therefore, the quality of currently deployed optical cables with 81.6 km in length should be assessed to ensure if high capacity WDM system could be implemented on existing optical cables. Two important characteristic parameters, Transfer Loss and PMD (Polarization Mode Dispersion), were measured to evaluate quality of existing optical cable. Transfer Loss was measured at 0.244 dB per kilometer, which is lower than the design standard value at 0.275 dB/km. The measured PMD value gave at 0.030ps/km, and it, therefore, satisfies the value recommended by ITU-T (International Telecommunication Union-T) of 0.5ps/km. In addition, the transfer characteristic for existing 2.5 Gbps and 10 Gbps system were measured and evaluated, and the results showed that error-free transfer is very much feasible. Computer simulation for DWDM system, which is likely be a future backbone network in Korea, to assess the transfer characteristic using the same condition employed for 2.5 Gbps and 10 Gbps was carried out as well. The simulation verified that a stable network operation and reliable service could be provided.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.225-231
• /
• 2013

Low voltage ride through capability augmentation of a hybrid micro-grid system is presented in this paper which reflects enhanced reliability in the system. The control scheme involves parallel connected multiple ac-dc bidirectional converters. When the micro-grid system is subjected to a severe voltage dip by any transient fault single power converter may not be able to provide necessary reactive power to overcome the severe voltage dip. This paper discusses the control strategy of additional power converter connected in parallel with main converter to support extra reactive power to withstand the severe voltage dip. During transient fault, when the terminal voltage crosses 90% of its pre-fault value, additional converter comes into operation. With the help of additional power converter, the micro-grid system withstands the severe voltage fulfilling the grid code requirements. This multiple converter scheme provides the micro-grid system the capability of low voltage ride through which makes the system more reliable and stable.

• 한국정보통신학회논문지
• /
• 제4권4호
• /
• pp.809-815
• /
• 2000

The box capacitor structure with HSG-Si described here reliably achieves a cell capacitance of 28fF with a cell area of a $0.4820\mum^2$ for 128Mbit DRAM. An HSG-Si formation technology with seeding method, which employs Si2H6 molecule irradiation and annealing, was applied for realizing 64Mbit and larger DRAMS. By using this technique, grain size controlled HSG-Si can be fabricated on in-situ phosphorous doped amorphous silicon electrodes. The HSG-Si fabrication technology achieves twice the storage capacitance with high reliability for the stacked capacitors.The box capacitor structure with HSG-Si described here reliably achieves a cell capacitance of 28fF with a cell area of a $0.4820\mum^2$ for 128Mbit DRAM. An HSG-Si formation technology with seeding method, which employs Si2H6 molecule irradiation and annealing, was applied for realizing 64Mbit and larger DRAMS. By using this technique, grain size controlled HSG-Si can be fabricated on in-situ phosphorous doped amorphous silicon electrodes. The HSG-Si fabrication technology achieves twice the storage capacitance with high reliability for the stacked capacitors.

• 한국군사과학기술학회지
• /
• 제11권4호
• /
• pp.59-67
• /
• 2008

In the next near future, the human would like to use the small unmanned ground vehicle(SUGV) on the diverse fields. Specially the world of today is tried to apply with operating the task on very difficult working environments such as some dangerous or unreachable area. To work this task, this vehicle should be guaranteed with the high level of reliability, safety, and performance. In this paper, we propose to focus on not only the functional requirements, but also the non-functional requirements based on software architecture at the design stage for developing the embedded system. Through focusing on the non-functional requirements on this software architecture, we can obtain the design goal of the target system and also show the enhancement of reliability, safety and performance with 'Vtune' performance analysis tool.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.57-61
• /
• 2007

The current limiting characteristics of hybrid SFCL with additional power electronic devices was investigated in order to improve operation reliabilities. The hybrid SFCL developed consists of a superconducting trigger (S/T) part, a fast switch (F/S) module and a current limiting (C/L) part. Although hybrid SFCL had shown a excellent current limiting characteristics, this device was rather vulnerable to the residual arc currents which could exist during fast switch operation. This undesirable arc should be extinguished as quickly as possible in order to implement perfect fault current commutation. So, in order to eliminate the residual arcs between fast switch contacts, the power electronic devices (IGBT or GTO) were connected in series between the S/T part and the interrupter of the F/S module. According to the fault tests conducting with an input voltage of $270\;V_{rms}$ and a fault current of $5\;kA_{rms}$, The power electronic devices could perfectly remove the arc generated between the contacts of the interrupter within 4 ms after the fault occurred. From the test analysis, it was confirmed that the hybrid SFCL could enhance the operation reliability by adopting additional power electronic devices.

• Journal of applied mathematics & informatics
• /
• 제41권5호
• /
• pp.1129-1143
• /
• 2023

Social media platforms have become an integral part of our daily lives, and they generate vast amounts of data that can be analyzed for various purposes. However, the quality of the data obtained from social media is often questionable due to factors such as noise, bias, and incompleteness. Enhancing data quality is crucial to ensure the reliability and validity of the results obtained from such data. This paper proposes an enhanced decision-making framework based on Business Decision Management Systems (BDMS) that addresses these challenges by incorporating a data quality enhancement component. The framework includes a backtracking method to improve plan failures and risk-taking abilities and a steep optimized strategy to enhance training plan and resource management, all of which contribute to improving the quality of the data. We examine the efficacy of the proposed framework through research data, which provides evidence of its ability to increase the level of effectiveness and performance by enhancing data quality. Additionally, we demonstrate the reliability of the proposed framework through simulation analysis, which includes true positive analysis, performance analysis, error analysis, and accuracy analysis. This research contributes to the field of business intelligence by providing a framework that addresses critical data quality challenges faced by organizations in decision-making environments.

• 한국통신학회논문지
• /
• 제38C권5호
• /
• pp.409-419
• /
• 2013

키넥트 카메라는 마이크로소프트사에서 2010년 11월에 출시한 xbox360의 움직임 감지 카메라로 깊이 영상과 색상 영상을 획득할 수 있다. 하지만 적외선 패턴을 이용한 깊이 영상의 획득 방법의 한계로 인해 객체의 경계 주변으로 홀(hole) 및 잡음이 생기고 영상으로 재생 시 경계 주변에서 흔들림(flickering) 현상이 발생한다. 본 논문에서는 이러한 흔들림 현상을 보정하여 화질이 좋은 가상 시점 영상을 실시간으로 생성하는 기법을 제안한다. 제안하는 기법에서는 먼저 결합형 양방향 필터를 이용하여 경계 주변의 홀을 채운다. 경계 주변의 흔들림 현상은 화소를 탐색하여 처리하는 기법을 적용하여 보정한다. 향상된 깊이 영상과 색상 영상에 3D 워핑(3D warping) 기법을 적용하여 가상 시점 영상을 획득한다. 획득된 영상에서 가려짐 영역(occlusion region)으로 인하여 생기는 홀은 블록기반의 기울기 탐색 기법과 블록의 신뢰도를 이용하여 채우게 된다. 실험을 통해 제안하는 시스템이 가상 시점 영상을 실시간으로 합성하는 것을 확인하였다.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.143-148
• /
• 2013

When the fault occurs in power system, the fault-current exceeds breaking capacity of the circuit breaker. So, reliablity of the power system is decreased sharply. Superconducting fault-current limiter (SFCL) is operated without impedance in normal state. The fault-current is limited by its impedance during the fault condition. However, the SFCL has several weak points such as huge size, high-price, liquid-nitrogen operation for the real power system. In this paper, We suggested the high-speed interrupter to limit the fault-current in case of the single line-to-ground fault. In addition, we compared the high-speed interrupter with the SFCL to ensure the operation reliability. The proposed interrupter detected the fault-current through the CT, and the power was supplied by operation of the SCR control system. In this experiment, the power of high-speed interrupter was applied after the 4.8[msec] from fault instant. The on-off operation of the interrupter was started after half-cycle from the fault. The fault-current was flowed into the impedance element by the switching operation of the high-speed interrupter. So, the fault current was limited within one cycle, and then it didnt exceed the capacity of a circuit breaker. We confirmed that there was slight difference between the SFCL with high-speed interrupter in terms of limiting-time of the fault-current and switching speed of the SCR. The high-speed interrupter was considered to be more efficient than the SFCL in size, cost or reliability.