• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.10
• /
• pp.99-108
• /
• 2007

As the structure of a mobile phone becomes thin to catch up with a slim product trend, the reliability of a LCD module is on the rise as a big issue for a product design. A drop test is the most basic and important verification method for a mechanical quality control but it requires much time and cost during a product development process. Thus many manufacturers have considered design guide lines using CAE and simulation for more effective usage of limited resources on the market. In this paper, the Maximum Principle Stress of a LCD glass panel is calculated on the basis of explicit FE Analyses method and input conditions are determined according to the general test standard. The design guideline for reliability improvements are suggested on the basis of the results of FE Analysis.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.71-79
• /
• 2012

In this paper, an evaluation of a product replacement ratio of irreparable items to the normally working ones is performed with a view to a warranty analysis. It is demonstrated that the replacement ratio during the warranty period can be estimated from the field data collected during the period of operation, and one can provide the management with a useful information regarding the appropriateness for the warranty period, which is vital to the product marketing strategy. Although warranty data usually take the form of multiply right censored interval data, the conventional reliability analysis method seems to be good enough as in this case. More sophisticated method such as warranty cost analysis and 2-dimensional warranty analysis is yet desired.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.71-74
• /
• 2007

We have concentrated on the performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle so far. But for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module. We built the standard to evaluate vibration and collision safety of high pressure storage system for fuel cell vehicle, and could verify reliability of high pressure storage system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.266-275
• /
• 2008

The performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle has been focused so far. However, for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module and vehicle level. The test procedure to evaluate vibration and collision safety of high pressure hydrogen storage system for the fuel cell vehicle is established and its reliability is verified.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.193-200
• /
• 2022

In this study, the finite-failure NHPP software reliability model was applied to the software development model based on the Weibull lifetime distribution (Goel-Okumoto, Rayleigh, Type-2 Gumbe), which is widely used in the software reliability field, and then the cost attributes were compared and evaluated. For this study, failure time data detected during normal operation of the software system were collected and used, the most-likelihood estimation (MLE) method was applied to the parameter estimation of the proposed model, and the calculation of the nonlinear equation was solved using the binary method. As a result, first, in the software development model, when the cost of testing per unit time and the cost of removing a single defect increased, the cost increased but the release time did not change, and when the cost of repairing failures detected during normal system operation increased, the cost increased and the release time was also delayed. Second, as a result of comprehensive comparative analysis of the proposed models, it was found that the Type-2 Gumble model was the most efficient model because the development cost was lower and the release time point was relatively faster than the Rayleigh model and the Goel-Okumoto basic model. Third, through this study, the development cost properties of the Weibull distribution model were newly evaluated, and the analyzed data is expected to be utilized as design data that enables software developers to explore the attributes of development cost and release time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.14-20
• /
• 2014

This study, the reliability of weapon systems acquisition and research and development in order to increase the effect of the modeling and simulation method has been studied using computational fluid dynamics. Weapon system acquisition, Test & Evaluation for use in the modeling and simulation can reduce the reliability of the time and cost savings and possible predictions and verification, and can provide useful data. However, the current weapon system acquisition and active use of modeling and simulation and verification do not even use the software are restricted. In this study, using computational fluid dynamics (CFD) modeling and simulation using the GAMBIT and FLUENT modeling and simulation was performed. The result is better than previous research results were confirmed in future weapon systems acquisition and research and development are expected to be actively used.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.721-727
• /
• 2015

The improvement of the reliability of weapon systems and the reduction of the total life-cycle cost based on the improving of the DT&E system for Company Organized weapon systems research and development are urgently required. The major advanced countries operate test and evaluation centers for military (U.S.), manage a large scale organization of IPT personnel (England) or conduct management of DT&E through a third party organization (France). Based on a survey of experts, an improvement of the DT&E policy in terms of reliability and objectiveness is needed, and management through a third party national defense agency and civilian agency such as the Surion development case is required. In addition, although it appears that efficiency improves when management of DT&E is performed by national defence agencies rather than civilian agencies, it is necessary to proceed by selecting a civilian agency based on competition in the case that it is difficult to select a national defence agency.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.112-115
• /
• 2001

This paper illustrates a new nodal effective load model for nodal probabilistic production cost simulation of the load point in a composite power system. The new effective load model includes capacities and uncertainties of generators as well as transmission lines. The CMELDC based on the new effective load model at HLII has been developed also. The CMELDC can be obtain from convolution integral processing of the outage capacity probabilistic distribution function of the fictitious generator and the original load duration curve given at the load point. It is expected that the new model for the CMELDC proposed. In this study will provide some solutions to many problems based on nodal and decentralized operation and control of an electric power systems under competition environment in future. The CMELDC based on the new model at HLII will extend the application areas of nodal probabilistic production cost simulation, outage cost assessment and reliability evaluation etc. at load points. The characteristics and effectiveness of this new model are illustrated by a case study of a test system.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.5
• /
• pp.1214-1223
• /
• 2013

The purpose of this work is to analyze the factors, criteria and importance that shippers in the international logistics industry take into account in choosing third-party logistics, and thereby to propose the directions of the areas and functions that third-party logistics will need to enhance on the basis of Analytic Hierarchy Process (AHP) methodology. To do that, this work collected and analyzed materials about changing environments of logistic industry and previous studies, and especially conducted a questionnaire survey on the factors to choose third-party logistics with the study subjects of shippers in the international logistics industry. To draw attribute factors, this work repeatedly chose and classified candidate factors through Delphi technique on the basis of the data of previous studies. The analysis results are presented as follows: regarding pairwise comparison between logistic cost and logistic service in relation of conflict, logistic service was recognized to be more important than logistic cost; regarding pairwise comparison between corporate capability and logistic cost, logistic cost was recognized to be more important; and regarding comprehensive evaluation, logistic service factors, including accuracy of order handling, service reliability, freight damage and compensation, a degree of fulfillment of promise, quality of transportation, and problem-solving ability, were found to be in high position.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.621-631
• /
• 2017

In this paper, we study the various impacts of connecting distributed generation (DG) to the distribution network. The comprehensive evaluation index system (CEIS) of four hierarchies is established, considering economy, reliability and voltage quality, and the calculation methods of different indexes are presented. This paper puts forward an improved triangular fuzzy number analytic hierarchy process (ITFNAHP) to weight the second level indexes (SLI) and the third level indexes (TLI), and calculates the variation coefficient to weight the fourth level indexes (FLI). We calculate the comprehensive weight coefficients based on the weight coefficients of the SLI, TLI and FLI, and then calculate the comprehensive evaluation of satisfaction (CES) of different access schemes. On the basis of the IEEE 33-bus example system, simulations of the calculation methods and the comprehensive evaluation method are carried out under different DG access schemes according to the same total investment cost and the same permeability, respectively, and the simulation results are analyzed and discussed.