• 제목/요약/키워드: release property

검색결과 187건 처리시간 0.026초

Structure-Activity Relationship of 2-Substituted Hydroquinones as Tyrosinase Inhibitors for Topical Delivery

  • Lee, Yeon-Jung;Yoon, Sung-Il;Kim, Dae-Duk;Kim, Jung-Sun
    • Journal of Pharmaceutical Investigation
    • /
    • 제36권2호
    • /
    • pp.103-107
    • /
    • 2006
  • In order to develop hydroquinone analogues for topical delivery, a structure-activity relationship study has been performed. A series of 2-substituted hydroquinones were tested for their ability to inhibit mushroom tyrosinase, alter melanin release and exert cytotoxicity in B6-F10 melanocytes. The electronic property of the 2-substituents did not affect the tyrosinase inhibition nor melanocyte toxicity. However, lipophilicity did affect to some degree the tyrosinase inhibition. The discrepancy in the structure-activity relationship may be due to the poor aqueous solubility of select analogues. Compounds with steric bulk at the 2-position seems to be less soluble, not enabling the analogue to interact effectively with the tyrosinase enzyme. Among the analogues tested, 2-isopropyl hydroquinone seems to be the most promising candidate for topical delivery, being the least toxic analogue with moderate melanin release inhibition.

반응혼합층의 층류확산화염 (Laminar Diffusion Flame in the Reacting Mixing Layer)

  • 신동신
    • 대한기계학회논문집B
    • /
    • 제20권2호
    • /
    • pp.605-615
    • /
    • 1996
  • Laminar flows in which mixing and chemical reactions take place between parallel streams of reactive species are studied numerically. The governing equations for laminar flows are from two-dimensional compressible boundary-layer equations. The chemistry is a finite rate single step irreversible reaction with Arrhenius kinetics. Ignition, premixed flame, and diffusion flame regimes are found to exist in the laminar reacting mixing layer at high activation energy. At high Mach numbers, ignition occurs earlier due to the higher temperatures in the unburnt gas. In diffusion regimes, property variations affect the laminar profiles considerably and need to be included when there are large temperature differences. The maximum temperature of a laminar reacting mixing layer is almost linear with the adiabatic flame temperature at low heat release, but only weakly at high heat release.

Intraoral ageing of aligners and attachments: Adverse effects on clinical efficiency and release of biologically-active compounds

  • Theodore Eliades;George Eliades
    • 대한치과교정학회지
    • /
    • 제54권4호
    • /
    • pp.199-209
    • /
    • 2024
  • The clinical application of aligners is accompanied by the ageing of the polymer appliances and the attachments used, which may result in inefficiency in reaching the predicted range of tooth movement, and release of compounds and microplastics in the oral cavity as a result of the friction, wear and attrition of the aligner and composite attachment. The purpose of this review is to present the mechanism and effects of in vivo ageing; describe the hydrolytic degradation of aligners and enzymatic degradation of composite attachments; examine the ageing pattern of aligners in vivo, under actual clinical scenarios; and identify a link to the discrepancy between predicted and actual clinical outcome. Lastly, strategies to deal with three potentially critical issues associated with the use of aligners, namely the necessity of weekly renewal, the dissimilar mechanical properties of aligner and attachment resulting in wear and plastic deformation of the aligner, and the development of integuments and biofilms with microbial colonization of the appliance, are discussed.

마찰 전단면의 전단거동과 에너지방출률 (The Initiation of Slip on Frictional Fractures)

  • 박치현
    • 터널과지하공간
    • /
    • 제20권5호
    • /
    • pp.344-351
    • /
    • 2010
  • 닫힌 균열을 따라 발생하는 전단거동을 Mode II 크랙의 시작과 진행으로 묘사할 수 있다. 파괴역학 이론에서는 순수 Mode II 재하에서 일반적으로 고유물성으로 인식되는 에너지 방출율(GII, Engergy Release Rate)이 한계점($G_{IIC}$)에 도달했을 때 전단거동이 시작된다고 예측한다. 지난 몇 년간 퍼듀대학의 암반공학그룹은 한계 에너지 방출률($G_{IIC}$)의 구속응력(normal stress)과 닫힌 균열의 거칠기에 대한 관계를 실험적으로 접근해왔다. 먼저 많은 실험들이 아크릴 재료를 대상으로 실행되었는데, 이는 광탄성(Photoelastic) 방법을 이용한 균열 끝(fracture tip)의 응력 집중 영역을 시각화하는 것을 가능케 해 주었다. 그 다음 실험 연구는 비교적 낮은 압축강도를 지닌 균질한 석고에 시행되었고, 최근에는 더 높은 압축강도를 지닌 재료를 대상으로 실험연구를 수행하였다. 그 예로 시멘트로 만든 시료 불록에 직접 전단 실험을 하였는데, 이전의 실험들과 마찬가지로 불연속면의 최대마찰각(Peak Friction Angle)이 잔류 마찰각(Residual Friction angle)과 비슷할 때만이 $G_{IIC}$가 재료의 고유물성으로 간주 될 수 있다는 점을 확인할 수 있었다. 그렇지 않은 경우에 한계 에너지 방출율($G_{IIC}$)은 구속응력과 함께 증가한다.

Synthesis of Triazole-functionalized Phenolic Resin and its Inherent Flame Retardant Property

  • Poduval, Mithrabinda K.K.;Kim, Tae-Hyun
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권11호
    • /
    • pp.3249-3253
    • /
    • 2014
  • A novel triazole-functionalized phenolic resin was developed, and its thermal and flame-retardant properties were investigated. The triazole group was incorporated as a pendant unit on the phenolic resin via copper-mediated click chemistry between propargylated phenolic resin and benzyl azide. The newly-developed triazole-functionalized phenolic resin showed higher thermal stability and char yield, together with a reduced total heat release (THR), than the non-functionalized bare phenolic resin, indicating enhanced flame retardancy for the triazole-functionalized phenolic resin.

방열기판 전극형성 기술 동향

  • 김단비;김지원;엄누시아;임재홍
    • 세라미스트
    • /
    • 제21권2호
    • /
    • pp.83-88
    • /
    • 2018
  • There is close relation between the heat generation and the performance of electronic device. The durability and efficiency of the device are degraded due to heat generation. It is necessary to release the generated heat from an electronic device. Based on demands of the printed circuit board (PCB) manufacturing, the robust and reliable plating technique of PCB is necessary. In this study, we review various methods for improving the heat sink property. These methods were considered to enhance the adhesion between ceramic substrate as heat sink and metal layer as electrode.

지하매설 도시가스배관의 누출시나리오에 따른 사고피해영향분석 (Consequence Analysis for Release Scenario of Buried High Pressure Natural Gas Pipeline)

  • 김진형;고병석;양재모;고상욱;고재욱
    • 한국가스학회지
    • /
    • 제18권3호
    • /
    • pp.67-74
    • /
    • 2014
  • 인구가 밀집되어 있는 도심지역에 매설된 천연가스 공급배관은 외부 또는 내부 결함으로 인한 가스의 누출, 확산, 화재, 폭발로 발생되는 재산과 인명피해의 큰 잠재위험을 지니고 있다. 사고를 미연에 방지하기 위해 정량적 평가에 기초한 위험관리를 실시하고 있으며, 매설배관의 정량적 위험성을 평가하기 위해서는 우선적으로 사고피해영향 분석을 통한 화학물질의 누출량 계산, 확산 분석, 화재 및 폭발로 인한 복사열과 압력파 계산이 필요하다. 본 논문에서는 CCPS, TNO에서 제안하는 model 들을 통하여 실제 San Bruno 매설배관 폭발 사고 시나리오를 기반으로 천연가스의 누출량, Fireball의 복사열 계산을 수행하고 결과 값을 실제 피해결과와 비교분석 하였다.

전로(轉爐)슬래그를 활용(活用)한 완효성(緩效性) 칼리 비료(肥料)의 제조(製造) 특성(特性) (Preparation of Slow-Release Potassium Silicate Fertilizer Using Converter Slag)

  • 양영호;김영환;고인용
    • 자원리싸이클링
    • /
    • 제16권4호
    • /
    • pp.10-16
    • /
    • 2007
  • 전로슬래그를 완효성 칼리비료로 활용하기 위한 기초연구로, 전로슬래그 분말에 시약급 $SiO_2$$K_2CO_3$를 첨가하여 염기도를 각각 0.7, 1.0및 1.4로 조절하고, $K_2O$의 함량은 22mass%로 고정한 후 볼밀에서 24시간 이상 혼합하여 $900^{\circ}C{\sim}1000^{\circ}C$ 사이의 온도에서 10분${\sim}$60분 동안 소결하였다. 소결 후 X-선 회절과 ICP분석을 이용하여 제조된 칼리비료의 특성을 조사하고 또한 염기도, 소결온도 및 소결시간이 완효성 칼리비료의 제조 조건에 미치는 영향을 검토하였다. 소결체의 수용성 $K_2O$의 용출특성은 소결시간이 길어질수록, 소결온도가 높아질수록, 염기도가 감소할수록 용출율이 감소하였다. 한편 구용성 $K_2O$의 용출특성은 염기도가 증가할수록 증가하는 경향이 뚜렷하였으며, 소결온도가 높을수록 용출율은 완만하게 감소하였다.

8-PSK 성운을 이용하는 이중계층 차분 선부호화 기법의 성능 분석 (Performance Analysis of Dual-Layer Differential Precoding Technique Using 8-PSK Constellation)

  • 박노윤;김영주
    • 한국통신학회논문지
    • /
    • 제38A권5호
    • /
    • pp.401-408
    • /
    • 2013
  • LTE 및 LTE-A 시스템에서 8-PSK 성운을 알파벳으로 가지는 이중계층 차분 코드북을 제안한다. 인접하는 무선 채널의 시간 상관으로 선부호화 행렬은 천천히 변화하므로, 무선 채널 공간의 전체를 양자화 하지 않고, 시간 상관에 따른 채널 공간의 일부분의 차분 성분만을 양자화하여 피드백을 한다면, 기존과 동일한 크기의 코드북으로도 가상적으로는 코드북이 매우 커지는 효과를 얻을 수 있어 채널 용량이 증가한다. 특히 제안하는 코드북은 LTE release-8의 코드북 설계조건인 8-PSK 성운을 사용하는 동 이득 특성 및 이중 계층 코드북이 단일 계층 코드북을 포함하는 특성을 가지는 새로운 차분 코드북이다. 코드북 내 코드워드들의 인자들이 8-PSK 성운만을 사용하므로, 선부호화 및 복호 시에 계산량이 낮아지는 LTE 코드북의 장점을 그대로 유지할 수 있다. 또한 동 이득 성질은 상대적으로 저렴한 비선형 증폭기를 사용할 수 있는 장점이 있어 가격의 제한을 받는 단말기 설계에는 필수적인 요소이다. 컴퓨터 시뮬레이션을 통한 이중계층 선부호화 기법의 성능 분석에서, 동일한 피드백 비트 수를 갖는 같은 크기의 코드북에서 제안하는 차분 코드북은 정상상태에서 기존 LTE 코드북보다 최소 1.2dB 성능 향상을 보인다.

Preparation and Characterization of Self-assembled Glycol Chitosan Hydrogels Containing Palmityl-acylated Exendin-4 for Extended Hypoglycemic Action

  • Lee, Ju-Ho;Lee, Chang-Kyu;Bae, Sung-Ho;Yoon, Jeong-Hyun;Choi, Eun-Joo;Oh, Kyung-Taek;Lee, Eun-Seong;Lee, Kang-Choon;Youn, Yu-Seok
    • Journal of Pharmaceutical Investigation
    • /
    • 제41권3호
    • /
    • pp.173-178
    • /
    • 2011
  • Injectable chitosan hydrogels have attracted great potential due to sustained-release property and safety. Here, palmityl-acylated glycol chitosan (Pal-GC) was used to generate physically cross-linked hydrogels by virtue of hydrophobic attraction of linear fatty carbons. Glycol chitosan was chemically modified with N-hydroxysuccinimide-activated palmitic acid in dimethylsulfoxide (DMSO) containing dimethylaminopyridine. Through a series of preparation steps of (i) dialysis with DMSO, (ii) addition of palmityl-acylated exendin-4 (Ex4-C16), and (iii) dialysis with water, Pal-GC was self-assembled to form physically cross-linked hydrogels entrapped with Ex4-C16. The Pal-GC derivative was analyzed by using 1H NMR, and the surface morphology of Pal-GC hydrogels formed was examined by scanning electron microscopy. Also, the hypoglycemic effect induced by Pal-GC hydrogels containing Ex4-C16 (250 nmol/kg) was evaluated in non-fasted type 2 diabetic db/db mice and compared with GC hydrogels containing native Ex4 at the same dose. Results showed that palmityl group was successfully conjugated with the amines of glycol chitosan, and that Pal-GC efficiently generated the hydrogels formation. Moreover, Pal-GC hydrogels containing Ex4-C16 was found to greatly prolong the hypoglycemia duration (~ 4 days). This was due to the dual-functions of the palmityl groups present in both GC and exendin-4 such as hydrophobic attraction and plasma albumin-binding. We consider this new type of self-assembled GC hydrogels loaded with Ex4-C16 would be a promising long-acting sustained-release system with anti-diabetic property.