• ETRI Journal
• /
• 제39권6호
• /
• pp.803-812
• /
• 2017

A decode-and-forward system with an energy-harvesting relay is analyzed for the case when an arbitrary number of independent interference signals affect the communication at both the relay and the destination nodes. The scenario in which the relay harvests energy from both the source and interference signals using a time switching scheme is analyzed. The analysis is performed for the interference-limited Nakagami-m fading environment, assuming a realistic nonlinearity for the electronic devices. The closed-form outage probability expression for the system with a nonlinear energy harvester is derived. An asymptotic expression valid for the case of a simpler linear harvesting model is also provided. The derived analytical results are corroborated by an independent simulation model. The impacts of the saturation threshold power, the energy-harvesting ratio, and the number and power of the interference signals on the system performance are analyzed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.443-461
• /
• 2014

Overlay routing has emerged as a promising approach to improve reliability and efficiency of the Internet. For one-hop overlay source routing, when a given primary path suffers from the link failure or performance degradation, the source can reroute the traffic to the destination via a strategically placed relay node. However, the over-heavy traffic passing through the same relay node may cause frequent package loss and delay jitter, which can degrade the throughput and utilization of the network. To overcome this problem, we propose a Load-Balanced One-hop Overlay Multipath Routing algorithm (LB-OOMR), in which the traffic is first split at the source edge nodes and then transmitted along multiple one-hop overlay paths. In order to determine an optimal split ratio for the traffic, we formulate the problem as a linear programming (LP) formulation, whose goal is to minimize the worse-case network congestion ratio. Since it is difficult to solve this LP problem in practical time, a heuristic algorithm is introduced to select the relay nodes for constructing the disjoint one-hop overlay paths, which greatly reduces the computational complexity of the LP algorithm. Simulations based on a real ISP network and a synthetic Internet topology show that our proposed algorithm can reduce the network congestion ratio dramatically, and achieve high-quality overlay routing service.

• 한국철도학회논문집
• /
• 제15권6호
• /
• pp.597-603
• /
• 2012

본 연구에서는 바이어스 궤도계전기의 접점재료를 선정하는데 있어 Ag 접점과 AgC 접점의 문제점을 분석하고, 안전성을 평가하는데 목적이 있다. 접점의 용착실험과 반복개폐 실험을 실시하여 접점의 특성을 알아보았다. 실험 결과, Ag 접점은 비교적 낮은 전류에서 용착이 발생하였고, AgC 접점은 온도특성이 우수하여 대전류에서도 용착이 발생하지 않았다. 반복개폐 실험에서는 AgC 접점의 개폐횟수가 증가할수록 저항이 불안정하고 접점에 전이현상이 발생하여 접점소모가 큰 것으로 나타났다. 연구 결과, AgC 접점은 용착특성에서는 우수하나 반복개폐 실험에서 저항변화가 많아 사용상 주의가 요구되며, Ag 접점은 반복개폐 특성은 우수하나 용착특성에서 취약한 것으로 나타났다.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3108-3115
• /
• 1999

Frame relay needs UPC function for the multiplexed logical connections to prevent malicious user traffic from incoming to network, to guarantee the QoS of conformed user traffic, and to protect the normal operation of network system. On the FR/ATM interworking in ATM networks, the UPC may be conducted either by cell-based ATM UPC or frame-based FR UPC. Frames come into and traverse ATm networks by segmentation to ATM cells. Of course, FR QoS should be guaranteed in spite of segmentation and reassembly in ATM networks. In this paper, we compared the QoS of cell-based ATM UPC and frame-based FR UPC in terms of analysis and simulation in case of ingress of excess traffic over negotiated traffic parameters at user-to-network interface. Also we studied frame-based UPC schemes including window-based FR UPC and frame-based VSA which is an ATM UPC algorithm recommended by ITU-T. We described introductions to frame relay including frame structure and FR/ATM interworking, FR traffic parameters and their relationship, comparison of FR QoS between frame-based FR UPC and cell-based ATM UPC, comparison of FR UPC schemes, necessities of egress traffic control, and conclusions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1899-1903
• /
• 1991

This paper presents a water level control method using Z-80 microcomputer. The process considered in this paper is one tank system which is described by an unknown nonlinear differential equation. The water level is measured by the end of bar installed at a float passing through 8 pair of photointerrupters located at equal distance. Therefore, the input data to 8255 which is interface between Z-80 and photointerrupters is discrete value, namely, value under 1. values from 1 to 8, and value upper 8. The water is pumped into the tank from a reservoir by switching on a relay connected to a moter and pump driving system. The pumping is stopped by switching off the relay. Experimental studies for two types of controllers are performed in order to investigate the control performance of water level of the water pumping system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권1호
• /
• pp.50-67
• /
• 2015

The Cognitive Radio (CR) paradigm in tactical ad hoc networks is an important element of future military communications for network-centric warfare. This paper presents a novel Cognitive Link State Routing protocol for CR-based tactical ad hoc networks. The proposed scheme provides prompt and reliable routes for Primary User (PU) activity through procedures that incorporate two main functions: PU-aware power adaptation and channel switching. For the PU-aware power adaptation, closer multipoint relay nodes are selected to prevent network partition and ensure successful PU communication. The PU-aware channel switching is proactively conducted using control messages to switch to a new available channel based on a common channel list. Our simulation study based on the ns-3 simulator demonstrates that the proposed routing scheme delivers significantly improved performance in terms of average end-to-end delay, jitter, and packet delivery ratio.

• 한국통신학회논문지
• /
• 제22권9호
• /
• pp.2027-2034
• /
• 1997

프레임 릴레이는 망에서의 오류제어와 흐름제어 기능을 제거하여, TI 또는 EI의 속도로 원거리에서 다양한 길이를 갖는 프레임을 전송하고 다중화하는 고속 패킷 교환 기술이다. 그리고 오류제어와 흐름제어의 생략의 결과로 발생하는 망에서의 혼잡을 피하고 복구하기 위해서는 일반적으로 몇가지의 혼잡제어 방식이 쓰이는데, 본 연구에서는 프레임 릴레이망에서 DE비트를 사용하여 전송률을 강제적으로 조정하는 혼잡제어 방식에 대해서 수치적으로 성능해석을 수행하였다. 수치적인 해석을 위하여 각각의 프레임이 Poisson 분포를 따르며 지수분포 길이로 도착한다고 가정하고 시스템의 크기가 K인 경우, 프레임 릴레이 교환기를 하나의 서버와 K-1(1

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.99-105
• /
• 2014

Power transformers are applied throughout the power system to connect systems of different voltage to one another. Since a ratio differential relay offers high sensitivity in detection of internal faults in power transformers, it is widely used in the main protection system. The use of nonlinear devices such as rectifiers and other devices utilizing solid state switching have been increased in industry during recent years. For nonlinear loads, the load current is not proportional to the instantaneous voltage. This situation creates harmonic distortion on the system. The harmonic could differential relay misoperation if not recognized. This paper aims at analyzing and probing into the influences of harmonics on a ratio differential relay for power transformer protection.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.147-148
• /
• 2007

BICC protocol is a relay protocol adaptable to ATM and IP based core networks compared to ISUP protocol to TDM networks. Using BICC protocol, multi-rate bearer traffic such as voice and video can flow in the relay core networks. BICC protocol is standardized as WCDMA circuit switching networks in 3GPP Release 4. Thus KTF is now operating core networks using BICC protocol. In this paper, we describe the background and characteristics of BICC protocol. We also provide the status of KTF WCDMA core networks using BICC. To show the efficiency of BICC protocol an analytical simulation is given in which the results can be expected by intuitive observation.

• International Journal of Contents
• /
• 제1권1호
• /
• pp.45-49
• /
• 2005

If the service provider provides mobile service with mobile switching centers that use different handoff message format, the soft-handoff between mobile switching centers is not available and the hard-handoff scheme is used instead. When this occurs, calls are often disconnected or there is an interruption of service. This can be very annoying to a mobile user. We propose the handoff subsystem of the ATM switch which provides the soft-handoff between wireless cells under the control of different MSCs. The proposed handoff subsystem transforms the handoff message format of the source MSC to that of the destination MSC. It also provides efficient routing scheme that distributes handoff packets to balance the traffic load.