• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1317-1323
• /
• 2002

This paper describes the comparison of calculated effective stress with experimental one in austenitic heat resistant steels, STS310J1TB and STS310S with and without a small amount of Nb and N. Based on a solute atoms diffusion model, contribution from soluble nitrogen to the high-temperature strength was numerically examined for austenitic heat-resisting Fe-Cr-Ni-N(STS310J1TB) and Fe-Cr-Ni (STS310S) alloys. The solute atmosphere dragging stress of dislocation was calculated in optional dislocation velocity of STS310J1TB and STS310S at $650^{\circ}C$, $675^{\circ}C$ and $700^{\circ}C$. As a result of the numerical calculation, the solute atmosphere dragging stress of STS310J1TB was about 50 times larger than that of STS310S. When the temperature became high, the maximum value of solute atmosphere dragging stress was small and the velocity of moving dislocation was fast. From the relationship between the dislocation rate and the solute atmosphere dragging stress, the relation of both was proportional and the inclination is about 1 in the level with low velocity of moving dislocation. From above results, the mechanism of dislocation movement in STS310J1TB was the solute atmosphere dragging stress. The solute atmosphere dragging stress, which was calculated from the numerical calculation was close to the effect stress in stress relaxation tests.

• 한국재료학회지
• /
• 제18권5호
• /
• pp.235-240
• /
• 2008

This paper presents results and observations obtained from a study of the optical and thermal properties of alkali tellurite depending on the composition. Fourier transform infrared (FT-IR) spectra showed evidence of chemical modification from $TeO_4$ trigonal bipyramids (tbp) to $TeO_3$ trigonal pyramids (tp) in tellurite glasses. The optical band gaps of the different glass samples calculated using Tauc's method were found to range from 3.5-3.8 eV. The glass transition temperature (Tg) and glass stability (${\Delta}T$) of alkali tellurite glasses were investigated, as $M_2O$ [M: Li, Na, K] amounted to 25 mol%, through the use of differential thermal analysis (DTA). The coefficient of thermal expansion (CTE) was measured in a thermo mechanical analysis (TMA) with a slow heating rate after the glass samples were annealed. The results confirm that the optical band gap of alkali tellurite glasses depends on the Te-O-Te structural relaxation related to the ratio of bridging/non bridging oxygen (BO/NBO). In contrast, the thermal properties are related to the ionic field strength of the Te-O-M and M-O-M bonds, and the Te-O-Te breakage depends on the ratio of BO/NBO.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.1-7
• /
• 2018

현수교 주 케이블은 케이블 밴드의 볼트 축력에 대한 정기적인 유지 관리가 매우 중요하다. 현수교 케이블 밴드의 볼트 축력은 시간이 경과함에 따라 케이블 소선의 크리프 현상, 볼트의 릴렉세이션, 하중 변동, 케이블 소선의 재배열 등으로 인해 축력 감소 현상이 발생하게 된다. 본 연구에서는 국내 현수 교량(SR대교)의 케이블 밴드가 시간이 경과하면서 발생하는 축력 감소 현상에 대해 그 원인 및 감소량 등에 대한 현장 측정 및 이론적 검토, 안전율 검토, 장기적인 이력 관리 등을 수행하였다. 그 결과, 케이블 밴드 볼트 축력 감소는 주 케이블 소선에 사용된 아연 도금층의 소성 변형에 크게 영향받는 것을 확인하였으며, 이에 대한 이론적 체계 및 장기 이력 관리에 대한 적용성을 확립하였다.

• 국제물리치료학회지
• /
• 제9권4호
• /
• pp.1683-1686
• /
• 2018

Low back pain (LBP) is the most common reason for seeking physical therapy (PT) care. Recent studies suggest that axial loading can have a positive impact on the intervertebral disc by improving its tensile strength. Further, whole body vibration (WBV) appears to improve spinal muscle relaxation. Therefore, this case study describes the use of axial loading using a mini-trampoline in a female with chronic LBP. This case report is a single subject design. This patient is a 29-year-old female with a six-month history of low back pain following a motor vehicle accident. MRI found herniated discs at L4 and L5, clinical tests were positive for pain in the L4 and L5 dermatome and myotome the slump test was positive for neural tension, and LBP was constant at 4-6/10 over the past four months. She received axial loading exercises using a mini-trampoline and performed six sessions that were, scheduled twice a week for three weeks. Her Oswestry Disability Index (ODI) score improved from 40% at the time of her first visit to 22% at her final visit. Pain measure on the Numeric Pain Rating Scale (NPRS) after the first treatment was 7/10, and her pain after the final treatment was 0/10. These changes in the pain scores are clinically significant and exceed the minimal clinically important difference (MCID). This patient had a significant improvement in her pain using the NPRS and the ODI. This case study suggests that axial loading may be an effective treatment for some individuals with discogenic chronic low back pain.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.302-308
• /
• 2020

Objective: The endurance and strength of deep neck flexor (DNF) muscles have a major role on the function and stability of the cervical spine. In recent years, there has been a lack of research that have investigated the muscle tone of the superficial neck muscles. The purpose of this study was to examine the relationship of between contraction ratio of the DNF and sternocleidomastoid (SCM) muscles, DNF endurance, and muscle tension of the neck muscles. Design: Cross-sectional study. Methods: Forty-seven subjects (male=20, female=27) participated in this study. The muscle tone of the upper trapezius (UT), SCM, and suboccipital (SO) muscle was measured using a contact soft tissue tone-measuring instrument. For the contraction ratio of the SCM and longus colli muscle, the thickness of the relaxation and maximum contraction state of the SCM and longus colli muscles were assessed using a diagnostic ultrasound measuring instrument and a pressure biofeedback unit. The deep neck flexor endurance test (DNFET) was performed in a cranio-cervical flexion posture. The correlations between the measured variables were investigated. Results: The relationship between the DNFET and SO tone showed a significant negative correlation (p<0.05). The relationship between the DNFET and contraction ratio showed a significant positive correlation (p<0.01). There was no significant correlation between the DNFET and SCM and UT tone. Conclusions: This study confirmed that there is a relationship between DNF endurance, DNF activation, and SO tone. The information on the results of this study may be used as a reference that can be actively applied in the clinical environment.

• 대한토목학회논문집
• /
• 제28권1A호
• /
• pp.15-24
• /
• 2008

본 논문에서는 프리캐스트 바닥판을 사용한 단순 강합성보에 교축방향으로 프리스트레스를 도입하는 경우, 콘크리트의 장기거동과 PS강재의 릴렉세이션에 의해 발생하는 프리스트레스의 손실과 장기처짐을 계산하기 위한 장기거동해석방법을 제시하였다. 또한 제시된 해석방법을 이용하여 장기거동해석을 수행하였으며, 이를 통해 합성보의 기하형상, 콘크리트강도 및 초기프리스트레스가 프리캐스트 바닥판을 사용한 강합성보의 장기거동에 미치는 영향을 평가하였다. 해석결과 합성보 기하형상의 영향에서 프리스트레스의 손실과 장기처짐에 영향을 미치는 주요인자는 각각 보의 단면적과 단면2차모멘트였다. 마지막으로, 총 프리스트레스 손실에서 크리프에 의한 손실과 건조수축에 의한 손실의 특성을 분석하여 소요 초기프리스트레스의 산정방법을 제안하였다.

• Human Ecology Research
• /
• 제62권1호
• /
• pp.121-135
• /
• 2024

By reviewing the cultural and historical literature on persimmon juice dyeing and Galot in Korea and Japan, this study aims to show the similarities and differences between the traditional and eco-friendly persimmon juice dyeing practices of these two countries and suggest a direction for the development of modern Galot. The root of persimmon dyeing in Korea is presumed to have begun around the 13^th or 14^th century; however, no documents or records have been found to support this notion. Meanwhile, there are records of persimmon dyeing in Japan that date back to around the 10^th century, but that fact is rarely mentioned. The historical and folk cultural significance of traditional persimmon dyeing in Japan and Korea was different in terms of the use of persimmon dye and the wearing of Galot. In other words, in Korea, Galot was mainly used as work clothes for farmers and fishermen, who took advantage of the garment's functional strength, while kaki-tannin in Japan was applied to fishing tools and industrial materials. Furthermore, Japanese traditional Galot (Kakigoromo) was worn by monks. This was a remarkable difference in that the garments were used as clothing by a special class within society. There were also differences between the two countries in terms of their use of modern persimmon juice dye and Galot. Korea is currently developing and releasing a variety of modern Galots. Meanwhile, Japan is attempting to develop a feeling of relaxation by using the natural colors of Kakisibu dyeing and applying sophisticated traditional pattern printing techniques to modern Galot.

• 터널과지하공간
• /
• 제20권1호
• /
• pp.28-38
• /
• 2010

본 연구는 NATM 터널의 천단변위, 내공변위, 숏크리트 응력, 록볼트 축력 등의 현장 계측치를 분석하고, 2D 3D 연속체 수치해석 및 2D 불연속체 불연속면 변형 해석을 실시, 그 결과를 비교 검토하여 각 구간의 시공과정에 따른 전반적인 변위와 거동의 경향성 및 수치해석적 접근의 적용성을 검토하고자 하였다. 그 결과 전단면 굴착 구간(지보패턴 P1~P3)에서 터널의 천단 및 내공변위를 예측하고자 할 시에는 2D 연속체 수치해석만으로도 가능하나, 상 하 반단면 구간(지보패턴 P4~P6)에서 터널의 천단 및 내공변위를 예측하고자 할 시에는 반드시 2D 불연속 수치해석을 수행하여야 한다. 한편, 2D 연속체 수치해석만으로도 전 구간에 대한 터널 내 숏크리트 응력 및 록볼트 축력의 예측이 가능하다. 그리고 시공 단계에 따른 거동 및 경향성을 확인하고자 할 시에는 3D 연속체 수치해석을 수행하여야 하며, 대형 대피소 등의 접속부의 경우도 반드시 3D 연속체 수치해석을 수행하여야 한다.

• 펄프종이기술
• /
• 제29권1호
• /
• pp.73-83
• /
• 1997

Most of the materials used in various industrial fields and also in our daily life are multi-component materials or composite materials, and it is well known that there are many cases where adhesion between the constituents within the bonded systems plays an important role. There are various types of performance evaluation tests for the bonded materials, among which tests for evaluating the bond performance under various conditions may be regarded as the most interesting ones for those engaged in work related to adhesion. I have studied on the mechanism of adhesion form the rheological standpoint with my colleagues, including some students from Korea, and I am very happy to be able to have a talk on some of our research works. In Japan, the so-called "adhesives" are usually classified into two categories;adhesives and pressure sensitive adhesives (PSA). Adhesives are the materials which solidify after bonding and are after used as the structural adhesives because the adhesive strength is comparatively strong. On the other hand, the pressure sensitive adhesives never solidify and are used as PSA tapes, labels or decals. About the adhesives, we have examined the dependence of adhesive strength(shear, tensile, peel) upon both temperature and rate of deformation, and found out some empirical rules which are applicable to most of the adhesive systems. We have also developed a simplified theory of adhesion, which is deseribed in terms of mechanical equivalent mode1 and a few failure criteria. Although some of the common rules can be accounted for according to this theory, it must be pointed out that a fracture mechanical approach ms inevitable especially in the region where the meehanical relaxation time of the adhesive is extremely large [W. W. Lim and H. Mizumachi]. About the pressure sensitive adhesives, we have studied on the PSA performance (peel, tack, holding power) as a function of both the viscoelastic properties and surface chemical properties of the materials, and found out some rules, and again we have developed a theory which deseribes the mechanism. And in addition, we have studied on the miscibility between linear polymers and oligomers, because PSA is generally manufactured by blending gums and tackifier resins. Many phase diagrams have been found and some of them have been analyzed on thermodynamic basis, and it became evident that the miscibility is a very important factor in PSA [H. J. Kin and H. Mizumachi]. In this presentation, I want to emphasize the fact that the adhesion performance is closely related to the structure/property of the adhesives.adhesives.

• 한국지반환경공학회 논문집
• /
• 제16권7호
• /
• pp.35-42
• /
• 2015

그라우팅 공법은 지반개량과 안정화에 널리 사용되어 왔으며 초기에는 대부분이 지하수를 차단하거나 조절하기 위해 사용되었고 최근에는 지반의 강화와 구조물의 보수 등 그 용도가 날로 증가하고 있다. 이러한 장점에도 불구하고 지금까지의 그라우팅 공법은 흙 입자 사이의 간극이 좁을 경우 중력식으로는 그라우트재의 침투가 불확실한 경우가 있으며, 주입압을 통하여 주입할 경우 인근 지반의 이완으로 인한 문제점들이 발생할 수 있다. 이에 대한 대안으로 최근 일정한 진폭과 주기를 갖는 진동주입공법이 개발되고 있으며, 이 공법은 정압주입 형태에 비해 그라우트재의 침투성 증대효과가 있는 것으로 보고되고 있다. 이에 본 연구에서는 단주기 진동에너지를 가하는 진동그라우팅의 보강효과를 구명하고자 진동주기, 진동시간 및 지반조건 등을 변화시켜 가며 그라우트재의 강도증진 효과, 확공효과, 지반보강효과 및 암반 절리면에서의 침투특성을 평가하였다. 실험결과 지반조건이 느슨한 경우 진동그라우팅 시 무진동 그라우팅에 비해 압축강도와 확공특성이 개선되는 것을 확인하였으며, 침투속도도 증가함을 확인할 수 있었다.