• Coupled systems mechanics
• /
• v.12 no.5
• /
• pp.419-428
• /
• 2023

We have developed a model for estimating the parameters of viscous materials from indirect tensile tests for asphalt. This is a simple Burger nonlinear rheological two-cell model or standard model. At the same time, we begin to develop a more versatile and complex multi-cell model. The simple model is validated using experimental load-displacement results from laboratory tests: The recorded displacements are used as input values and the measured force data are simulated with the model. The optimal model parameters are estimated using the Levenberg-Marquardt method and a very good agreement between the experimental results and the model calculations is shown. However, not all parts of the model are active in the loading phase of the experiment, so we extended the validation of the model to the simulation of the relaxation behaviour. In this stage, the other model parameters are activated and the simulation results are consistent with the literature. At this stage, we have estimated the parameters only for the two-cell uniaxial model, but further work will include results for the multi-cell model.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.177-185
• /
• 2000

An experimental research to evaluate the slip coefficients of high-strength friction-type bolt connection of weathering steel plate has been performed in this paper. The test specimens with mill scale or shot blast had been exposed in open air during 3 and 6 months and cleaning of rust surface by hand brushing, power tool brushing and no cleaning was considered. The relaxation of bolt clamping force had also been measured during 600 hours. It was found that slip coefficients increased to the value over 0.6 with exposure except mill scale surface by power tool brushing. The relaxation of bolt tension force in exposed specimens also increased and maximum value reached to about 10%.

• Journal of Ginseng Research
• /
• v.16 no.3
• /
• pp.175-182
• /
• 1992

Intravenous administration of saponin from the root of Panax ginseng (red ginseng) lowered the blood pressure in a dose-dependent manner (10~100 mg/kg B.W) in anesthetized rats. Therefore, experiments were designed to study whether this lowering of blood pressure is associated with the release of endothelium-derived relaxing factor. Rings of thoracic aorta with and without endothelium were suspended for the measurement of isometric tension in organ chamber. All experiments were performed in the presence of indomethacin (10-5 M). Ginseng saponin (10-5~3$\times$10-4 g/ml) relaxed contractions induced by phenylephrine (10-5 M) in the aorta with endothelium but not in that without endothelium. Treatment of aortic rings with NG_monomethyl-L-arginine (L-NMMA 10-4 M for 30 min), a competive inhibitor of nitric oxide synthase and methylene blue (M.B., 3$\times$10-7 M for 30 min), an inhibitor of soluble guanylate cyclase, diminished the relaxation induced by ginseng saponin. In thoracic aortic rings from rats treated with ginseng saponin for 2 weeks intraperitoneally, the relaxation to acetylcholine was increased compared with non-ginseng treated rings. These data suggest that red ginseng saponin evokes hypotension and that vascular relaxations induced by red ginseng saponin are inediatpd by release of endothelium-derived relaxing factor.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.1
• /
• pp.8-15
• /
• 2012

The initial clamping forces of high strength bolts depending on different faying surface conditions drop within 1,000 hours regardless of loading, any other external force or loosening of the nut. This study is focused on an expectation model for relaxation of high strength bolt, which is confined to creep on coated faying surfaces after initial clamping. The range of this experiment is limited to estimate the relaxation of bolted joints coated by inorganic zinc primer. The candidate bolts were dacro-coated tension control bolts. The parameters of coated thickness for the faying surface were 96, 168,and $226{\mu}m$ respectively. From experiments, it exhibited that the logarithmic function for creep strain was derived due to the parameter of coating thickness. By using the creep strain, subsequently the quantitative model for estimating long term relaxation of high strength bolt can be taken with the elapsed time. The experimental results showed that the relaxation after the initial clamping of high strength bolt rose to a much higher range from 10% to 18% due to creep of the coating as the coating thickness was increased. This study showed that the clamping force reflecting relaxation after the elapse of constant time can be calculated from the initial clamping force of high strength bolt.

• YAKHAK HOEJI
• /
• v.58 no.4
• /
• pp.223-228
• /
• 2014

The present study was undertaken to investigate the influence of sulforaphane on vascular smooth muscle contractility and to determine the mechanism involved. We hypothesized that sulforaphane, the primary ingredient of broccoli of cruciferous vegetables, plays a role in vascular relaxation through inhibition of Rho-kinase in rat aortae. Intact of denuded arterial rings from male Sprague-Dawley rats were used and isometric tensions were recorded using a computerized data acquisition system. Interestingly, sulforaphane significantly inhibited fluoride, phorbol ester or thromboxane $A_2$ mimetic-induced contraction in denuded muscles suggesting that additional pathways different from endothelial nitric oxide synthesis such as inhibition of Rho-kinase or MEK might be involved in the vasorelaxation. Furthermore, sulforaphane inhibited thromboxane $A_2$-induced increases in pERK1/2 levels suggesting the mechanism including inhibition of thromboxane $A_2$-induced increases in ERK1/2 phosphorylation. This study provides evidence that sulforaphane induces vascular relaxation through inhibition of Rho-kinase or MEK in rat aortae.

• YAKHAK HOEJI
• /
• v.57 no.5
• /
• pp.376-381
• /
• 2013

The present study was undertaken to investigate the influence of curcumin on vascular smooth muscle contractility and to determine the mechanism involved. We hypothesized that curcumin, the primary ingredient of Curcuma longa, plays a role in vascular relaxation through inhibition of Rho-kinase in rat aortae. Denuded arterial rings from male Sprague-Dawley rats were used and isometric tensions were recorded using a computerized data acquisition system. Interestingly, curcumin inhibited fluoride-induced contraction but didn't inhibit phorbol ester-induced contraction suggesting that additional pathways different from endothelial nitric oxide synthesis might be involved in the vasorelaxation. Furthermore, curcumin significantly inhibited fluoride-induced increases in pMYPT1 levels. On the other hand, it didn't significantly inhibit phorbol ester-induced increases in pERK1/2 levels suggesting the mechanism involving inhibition of fluoride-induced MYPT1 phosphorylation. This study provides evidence that curcumin induces vascular relaxation through inhibition of Rho-kinase in rat aortae.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.2 s.20
• /
• pp.69-76
• /
• 2006

Cable dome is one of tension structure which is gradually stabilized by tensioning tables from initially unstable state to finally stable state. This stabilizing process is not able to be developed by general analysis because some cables endure compression forces during stabilizing process. Thus, this paper uses dynamic relaxation method to solve this problem. To apply this stabilizing process analysis to the actual project, this paper deals with cable dome roof of Seoul Olympic Gymnasium. Finally, this paper prove the usefulness of stabilizing process analysis by comparing the analysis results and the measurements.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.3 no.1
• /
• pp.7-15
• /
• 1997

The purpose of this study was to exame the pain relief effects of myofascial pain syndrome patient by Post-Isometric Relaxation. From July, 1996 to January, 1997, PIR was applied to myofascial pain syndrome associated with musculoskelatal lesions and was examed on 17 muscles in 98 patients at Sun General Hospital, Taejon city. The results of this study were as follows ; 1. Immediate pain relief group was 58(59%). 2. Only tenderness relief group was 24(25%). 3. No effect group was 16(16%). These results could be confirmed that the increased tension of the affected muscles with the resulting pain relieved by restoring the full stretch length of the muscle by PIR.

• Journal of Korean Physical Therapy Science
• /
• v.4 no.1
• /
• pp.255-263
• /
• 1997

The purpose of this study was to examed the pain relief effects of myofascial pain syndrome patient by post-isometric relaxation. From July, 1996 to January, 1997, PIR was applied to myofascial pain syndrome associated with musculoskelatal lesions and was examed on 17 muscles in 98 patients at Sun General Hospital, Taejon city. The results of this study were as follows ; 1. Immediate pain relief group was 58(59%). 2. Only tenderness relief group was 24(25%). 3. No effect group was 16(16%). These results could be confirmed that the increased tension of the affected muscles with the resulting pain relieved by restoring the full stretch length of the muscle by PIR.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.69-75
• /
• 1995

The deformation behavior of stainless steel-clad aluminum sheet metals under uniaxial tension has been investigated. The differences in mechanical properties such as elastic modulus, flow stress and plastic strain ratio, of component layers of the composite sheet gave rise to warping of the tensile specimens. The warping has been analyzed by FEM and the total force and momentum equilibria. The analyzed radii of curvature of the warped specimens were smaller than the measured data possibly due to elastic recovery during unloading. The differences in mechanical properties may also give rise to transverse stresses in the component layers. The transverse stresses have been analyzed on the assumption of isostrain and by the FEM in which the warping has been taken into account. The transverse stresses calculated by the FEM were lower than those by the isostrain hypothesis due to stress relaxation by the warping and turned out to be negligible compared with the longitudinal stresses. Consequently, the flow stresses of the composite sheets follow the rule of mixtures.