시스템분석(分析)에 의(依)한 삼림수확조절(森林收穫調節)에 관(關)한 연구(硏究) (A Study on the Forest Yield Regulation by Systems Analysis)
-
- 농업과학연구
- /
- 제4권2호
- /
- pp.344-390
- /
- 1977
본(本) 연구(硏究)는 계획기간내(計劃期間內)의 재적수확량(材積收穫量)을 최대화(最大化)하고 각분기(各分期)의 수확량(收穫量)과 수확면적(收穫面積)을 일정(一定) 범위(範圍)로 제약(制約)하여 계획기간내(計劃期間內)의 보속수확(保續收穫)을 도모(圖謀)하는 동시(同時)에 후계림(後繼林)의 법정영급배치(法正令級配置)가 유도(誘導)될 수 있는 적정수확안(適正收穫案)을 선형계획법(線型計劃法)에 의하여 선정(選定)하고, 제약량(制約量)의 변화(變化)가 총수확량(總收穫量) 및 분기별(分期別) 수확량(收穫量)과 수확면적(收穫面積)에 미치는 영향(影響)을 구명(究明)하는데 목적(目的)이 있다. 서울 대학교(大學校) 농과대학(農科大學) 부속연습림중(附屬演習林中) 개벌작업급(皆伐作業級)에 속하는 219개(個) 소반(小班)을 대상(對象)으로 하였으며, 이 삼림(森林)은 영급구성면(令級構成面)에서 볼 때 유영급(幼令級) 임분(林分)이 많다는 점(點)에서 전국(全國) 삼림(森林)을 대표(代表)한다고 할 수 있다. 본(本) 연구(硏究)에서는 한 분기년수(分期年數)를 5년(年), 계획기간(計劃期間)을 10분기(分期), 1영급(令級)을 5영개(令皆)로 하였으며, 벌채영급(伐採令級)의 범위(範圍)는 5~9영급(令級)이다. 한편, 후계림(後繼林)은 현실림(現實林)이 수확(收穫)되는 즉시 조림(造林)되고, 미립목지(未立木地)는 1분기내(分期內)에 조림(造林)되며 다음 벌기(伐期)까지 충분(充分)한 입목도(立木度)가 이루어지는 것으로 전제(前提)하였다. 소반(小班)을 벌구(伐區)로 하여, 각벌구(各伐區)가 계획기간내(計劃期間內)에 벌채(伐採)될 수 있는 모든 가능(可能)한 대체수확안(代替收穫案)을 그의 영급(令級)에 따라 작성(作成)하고, 여기에 현실림(現實林)과 후계림(後繼林)의 벌기예상수확량(伐期豫想收穫量)을 대입(代入)하여 각대체안(各代替案)의 계획(計劃) 기간내(期間內) 수확량(收穫量)(
프로펠러여객기 운항시대에 만들어졌던 국제항공운송인의 민사책임관계를 규정한 1992년의 바르샤바조약은 1955년의 헤이그 개정의정서, 1961년의 과다라하라조약, 1971년의 과테말라의정서 및 1975년의 몬트리올 제1, 제2, 제3및 제4의 정서 등 한개의 조약과 여섯 개의 의정서 등에 의하여 여러 차례 개정이 되었고 보완되면서 70여 년간 전세계를 지배하여 왔지만 오늘날 초음속(마하)으로 나르고 있는 제트여객기 운항시대에 적합하지 않아 "바르샤바조약체제" 상의 문제점이 많이 제기되어 왔다. 특히 시대에 뒤떨어진 "바르샤바조약체제" 는 2개의 조약과 여섯 개의 의정서로 매우 복잡하게 구성되어 있었으며 항공기사고로 인한 국제항공운송인의 손해배상사건에 있어 배상한도액이 유한책임으로 규정되어 있어 항상 가해자인 항공사와 피해자인 여객들간에 분쟁(소송 등)이 끊이지 않고 있으므로 이를 어느정도 해결하기 위하여 UN산하 ICAO에서는 상기 여러 개 조약과 의정서를 하나의 조약으로 통합(integration)하여 단순화시키고 현대화(modernization)시키기 위하여 20여 년간의 작업 끝에 1999년 5월에 몬트리올에서 새로운 국제항공운송인의 민사책임에 관한 조약(몬트리올 조약)을 제정하였다. "바르샤바조약체제" 를 근본적으로 개혁한 몬트리올 조약은 71개국과 유럽통합지역기구가 서명하였으며 미국을 비롯하여 33개국이 비준하여 2003년 11월 3일부터 전세계적으로 발효되었음으로 이 조약은 앞으로 전세계의 항공운소업계를 지배하게 되리라고 본다. 본 논문에서는 몬트리올 조약의 성립경위와 주요내용(국제항공여객운송인의 손해배상책임: (1)총설, (2)조약의 명칭, (3)조약의 전문, (4)국제항공여객에 대한 책임원칙과 배상액((ㄱ)국제항공여객의 사상에 대한 배상, (ㄴ)국제항공여객의 연착에 대한 배상), (5)손해배상 한도액의 자동조정, (6)손해배상금의 일부전도, (7)손해배상청구소송의 제기관계, (8)국제항공여객의 주거지에서의 재판관할관계, (9)항공계약운송인과 항공실제운송인과의 관계, (10)항공보험)을 요약하여 간략하게 설명하였다. 1999년 몬트리올 조약의 핵심사항은 국제항공운송인의 손해배상책임에 관하여 무한책임을 원칙으로 하되 100,000 SDR까지는 무과실책임주의를 채택하였고 이 금액을 초과하는 부분에 대하여서는 과실추정책임주의를 채택하였음으로 "2단계의 책임제도" 를 도입한 점과 항공기사고로 인한 피해자(여객)는 주소지의 관할법원에 가해자(항공사)를 상대로 손해배상청구소송을 제기할 수 있는 제 5재판관할권을 새로이 도입하였다는 점이다. 현재 우리 나라는 전세계에서 항공여객수송량이 11위 권에 접어들고 있으며 항공화물수송량도 3위 권을 차지하고 있음에도 불구하고 아직도 이 조약에 서명 내지 비준을 하지 않고 있음은 문제점으로 지적될 수가 있음으로 그 해결방안으로 세계의 항공산업선진국들과 어깨를 나란히 하고 상호 협력하기 위하여 조속히 우리 나라도 이 조약에 서명하고 비준하는 것이 필요하다고 본다. 한편 우리 나라와 일본은 국내항공운송에 있어서는 국내에서 항공기사고가 발생하였을 때에 국내항공여객운송인의 민사책임을 규정한 법률이 없기 때문에 항상 항공사 측과 피해자간에 책임원인과 한계 및 손해배상액을 놓고 분규가 심화되어 가고있으며 법원에서 소송이 몇 년씩 걸리어 피해자 보호에 만전을 기 할 수가 없는 실정에 있다. 현재 이와 같은 분규의 신속한 해결을 위하여 국내항공운송약관과 민상법의 규정을 적용 내지 준용하여 처리할 수밖에 없는 실정인데 항공기사고의 특수성을 고려하여 볼 때 여러 가지 문제점이 많이 제기되고 있다. 이와 같은 문제점을 해결하기 위하여 국내항공여객운송인의 책임한계 및 손해배상액을 분명하게 정하고 재판의 공평성과 신속성을 도모하기 위하여서는 항공운송계약 당사자간의 책임관계를 명확하게 규정한 "가칭, 항공운송법" 의 국내입법이 절실히 필요하다고 본다.
The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.
제조 중소기업들은 지속적인 성장과 생존을 위해 새로운 제품 개발에 필요한 많은 정보가 필요할 뿐만 아니라 자원의 한계를 극복하기 위한 네트워킹(networking)을 추구하지만, 규모의 한계로 인해 한계점에 봉착하게 된다. 초연결성으로 인해 비즈니스 환경의 복잡성과 불확실성이 더욱 높아지는 새로운 시대에 중소기업은 신속한 정보 확보와 네트워킹 문제를 해결이 더욱 절실해지고 있다. 이러한 문제를 해결하기 위해 공공기관인 정부출연(연)구기관(이하 '출연(연)')은 중소기업의 정보 비대칭성 문제를 해결해야하는 중요한 임무와 역할을 맞이하고 있다. 본 연구에서는 비즈니스 인텔리젼스의 경쟁 지능화(competitive intelligence) 기능과 외부 네트워크 활성화를 위한 서비스 인프라(service infrastructure)의 기능을 포함한 공공 정보지원 인프라를 통한 간접지원의 성과를 확산하고자 하는 목적으로 출연(연)이 중소기업의 혁신역량 제고를 위해 제공하는 공공 정보지원 인프라를 활용하는 중소기업의 차별적 특징을 파악하고, 인프라가 기업의 성과에 어떻게 기여하는 가를 규명하고자 하였다. 이를 위해 첫째, 출연(연)이 제공한 정보지원 인프라를 활용하는 제조 중소기업은 다른 중소기업과 어떤 차별적인 특정이 있는가? 라는 연구 질의를 도출하였다. 추가적으로 단순히 선택적 편의 여부를 판단하는 것을 넘어서 출연(연) 정보지원 인프라를 활용한 제조 중소기업의 특징을 복수 집단의 특징과 비교하는 연구를 진행하였다. 둘째, 출연(연)이 제공하는 정보지원 인프라를 활용한 제조 중소기업의 외부 네트워킹 역량이 제품 경쟁력에 어떻게 기여했는가? 라는 연구 질의이다. 본 연구에서 공공 정보지원 인프라에 의해서 강화된 외부 네트워킹 역량이 어떻게 제품 경쟁력에 영향을 미쳤는지 정밀하게 분석하기 위해 복수의 변수에 대한 매개 및 조절 효과 분석을 수행하였다. 연구 모형을 도출하기하기 위해 첫째, 외부 네트워킹이 기술혁신성과에 영향력에 대한 평가를 수행하였다. 일반적으로 기업들은 외부 네트워킹(networking) 전략을 통해 혁신에 필요한 가치 있는 정보를 획득할 수 있기 때문에 기술혁신성과를 높일 수 있다. 정보 획득은 중소 제조기업 경영자의 혁신에 대한 인식을 강화할 뿐만아니라, 의사결정을 효율적으로 하여 경쟁력을 강화시킬 수 있게 된다. 대기업에 비해 인력과 자금의 규모 한계를 극복하기 위해 중소기업은 외부 조직과의 협력관계를 보다 적극적으로 추구한다. 둘째, 기술사업화 역량이 기술혁신성과에 미치는 관계에 대한 평가를 수행하였다. 기술사업화는 생산과 마케팅을 통합하여 새로운 기술을 만드는 역량을 말한다. 우수한 생산 역량을 보유한 기업은 소비자의 수요를 가격, 품질, 신기능 측면에서 신속하게 충족시킬 수 있어 시장내 경쟁우위를 창출하고, 그 결과로 높은 재무적 혁신적 성과를 가져온다고 본다. 혁신적인 기업은 생산 역량과 마케팅 역량에서 일반 기업보다 높은 성과를 나타내는데, 기술혁신성과의 대표 지표로 제품 경쟁력을 지목하고 있다. 마지막으로 기업의 규모가 작을수록 새로운 혁신 정보를 확보할 수 있는 자체 정보지원 인프라가 없는 경향이 있다. 중소기업용 정보인프라는 기업의 제품 또는 서비스 역량을 강화하기 위한 전략에 필요한 중요한 정보를 확보할 수 있어야 하며, 데이터에 대한 해석 기능이 있어야 하고, 기업의 성장과 발전을 위한 다양한 주제(대기업, 공급자, 소비자 등)와의 협력 전략을 수립을 도울 수 있는 기능이 요구된다. 종합하면, 연구모형은 외부 네트워킹 역량(독립변수)이 기술혁신성과인 제품 경쟁력(종속변수)에 영향을 주는 기본 모형에 기술사업화 역량을 매개요인으로 적용하였고, 이들의 관계에 기업의 내부역량(연구원 집중도, 매출액, 업력)이 영향을 줄 수 있기 때문에 기업의 내부역량과 관련된 변수들을 통제하였다. 또한 KISTI가 제공한 공공 정보지원 인프라 활용한 기업별 역량 차이를 분석하기 위해, 정보지원 인프라 활용(효율성)과 관련된 KISTI 외부 기술사업화 전문가(멘토링) 정보지원 횟수의 조절 변수로 고려하였다. 본 연구에서 활용한 데이터 원천은 2차 정보인 '제8차 중소기업 기술통계조사' 자료와 1차 정보인 KISTI의 직접 설문 자료다. '제8차 중소기업 기술통계조사' 는 중소기업청과 중소기업중앙회에서 공동으로 매년 실시되고 있으며, 설문 조사의 모집단은 종사자수 5인 이상 300인 미만인 제조업 및 제조업 외 기업 중에서 기술개발을 수행하고 있는 중소기업 43,204개사이다. 이 중에서 2014년 12월 31일 현재 기준으로 기술개발을 수행하고 있는 3,300개 중소기업을 표본추출하여 방문조사를 실시하여 수집한 자료이다. 본 연구에서 KISTI의 정보지원 인프라를 통해 지원받은 290개의 KISTI 패밀리 기업(ASTI)을 대상으로 2017년에 전자 메일을 통해 자료를 수집하였다. 송부된 290개의 설문지 중 222개의 기업에서 회신을 보내왔으며 그 중에서 설문 내용이 유효한 설문 조사는 149건으로 활용율은 51.3%였다. 분석 결과에 대한 살펴보면 다음과 같다. 규모면에서는 공공 정보지원 인프라 활용 제조 중소기업(ASTI 설문 집단)과 R&D 중소기업(KBIZ 설문 집단)의 성향은 통계적으로 유의미하게 차이가 있었지만, 보다 많은 변수를 종합적으로 보면 크게 다르지 않은 집단이라고 판단했다. 공공 정보지원 인프라를 활용하는 제조 중소기업은 이미 출연(연)과 협업이 가능한 집단을 대표하는 성향 보이는 것으로 나타났다. 외부 네트워킹 역량 강화가 제품 경쟁력 제고에 기여하는데 있어서 기술사업화 역량(마케팅 및 생산 역량)이 가지는 매개 효과의 가능성을 탐색하기 위해서 먼저 통제 변수는 고려하지 않고, Baron과 Kenny(1986)의 매개 효과 분석을 수행했다. 분석결과 외부 네트워크 역량 강화 효과가 제품 경쟁력을 강화시키는 것으로 보였지만, 실제는 기술사업화 역량의 제고를 통해 제품 경쟁력을 강화시키는 것으로 나타났다. 공공 정보지원 인프라 활용의 효과성을 판단하기 위한 멘토링 정보지원 횟수의 조절효과 분석을 위해 3단계의 위계적 회귀분석을 수행하였다. 분석 결과 외부 네트워킹 역량과 멘토링 정보지원 횟수의 상호작용항이 혁신성과(제품 경쟁력)에 유의한 영향을 미쳤을 뿐 아니라, 모델의 설명력도 증가하여, 멘토링 정보지원 횟수의 조절 효과가 검증되었다. 마지막으로 앞서 확인된 복수 매개효과와 조절효과가 동시에 나타날 수 있는 가능성을 판단하기 위해서 매개된 조절효과를 검토했다. 분석결과 외부 네트워킹 역량이 높아지면 제품 경쟁력 제고에 양의 영향을 주지만, 조절 변수인 멘토링 지원 횟수가 높아질수록 그 영향은 오히려 약화되었다. 그리고 외부 네트워킹 역량이 높아지면 사업화 역량(마케팅과 생산)이 높아져서 제품 경쟁력이 높아지며, 조절변수인 멘토링 지원 횟수가 높아지면 독립변수 외부 네트워킹 역량이 매개변수 생산 역량에 미치는 역량이 작아졌다. 종합하면, 외부 네트워킹 역량의 제고는 제품 경쟁력을 높이는데 기여하는데, 직접적 기여하지는 않지만 마케팅과 생산 역량을 높여 간접적으로 기여한다(완전 매개 효과). 또한 이 과정에서 멘토링의 정보적 지원 횟수는 외부 네트워킹 역량 제고가 생산 역량을 제고하는 매개효과에 영향을 준다(순수 조절 효과). 그러나 멘토링 정보 지원 횟수는 마케팅 역량 제고와 제품경쟁력에 별다른 조절 효과를 보이진 않는 것으로 나타났다. 연구를 통한 시사점은 다음과 같다. KISTI의 정보지원 인프라는 서비스 활용 마케팅이 이미 잘 진행되고 있다는 결론을 이끌 수도 있지만, 반면에 시장의 정보 불균형을 해소하는 공공적 기능보다는(열위 기업 지원) 성과가 잘 도출될 수 있는 집단을 지원해서(의도적 선택적 편의) 성과가 잘 나타나도록 관리하고 있다는 결론에 이를 수 있다. 연구 결과를 통해서 우리는 공공 정보지원 인프라가 어떻게 제품경쟁력 제고에 기여하는지 확인했는데, 여기서 우리는 다음과 같은 몇 가지 정책적 시사점을 도출할 수 있다. 첫째, 정보지원 인프라는 분석된 정보뿐만아니라 이 정보를 제공하는 기관(또는 전문가)과 지속적인 교류나 이런 기관을 찾는 역량을 높이는 기능이 있어야 한다. 둘째, 공공 정보지원 (온라인) 인프라의 활용이 효과적이라면 병행적인 오프라인 지원인 정보 멘토링이 지속적으로 제공될 필요는 없으며, 오히려 멘토링과 같은 오프라인 병행 지원은 성과 제고보다는 이상징후 감시에 적절한 장치로 활용되어야 한다. 셋째, 셋째, 공공 정보지원 인프라를 통한 네트워킹 역량 제고와 이를 통한 제품경쟁력 제고 효과는 특정 중소기업에서 나타나기 보다는 대부분 형태의 기업에서 나타나기 때문에, 중소기업이 활용 능력을 제고할 노력이 요구된다.
본 논고는 19세기 이후 형성된 서화(書畫)의 유통과 확산의 양상을 당시 활발히 제작된 장식병풍 중 하나인 <백선도(百扇圖)>의 예를 통해 살펴본 글이다. 백선도는 화면에 다양한 형태의 부채를 겹쳐서 배치하고 각각의 선면(扇面) 안에 여러 종류의 화제(畫題)를 그린 것을 말한다. 부채와 선면화(扇面畫)라는 소재는 이전부터 존재하였지만 장식용 회화의 소재로 등장한 것은 19세기 이후로, 호사취미 경향을 반영하여 주로 병풍(屛風)으로 활발히 제작되었다. 지난 2016년 국립중앙박물관 특별전 '미술 속 도시, 도시 속 미술'에서 독일로텐바움세계문화예술박물관 소장 <백선도>가 새로이 소개된 바 있다. 6폭으로 구성된 이 병풍에는 한 폭 당 5개 이상의 다양한 종류의 부채들이 등장하고 각 부채 면에는 단순히 채색한 것 뿐 아니라 다양한 화목(畫目)의 그림들이 남아있다. 무엇보다 이 작품을 주목해야 하는 것은 국립중앙박물관에 동일한 초본(草本)이 전하고 있기 때문이다. 19세기에 들어서면서 이전의 왕실이나 사대부들이 사적인 공간에서 향유하였던 서화(書畫)는 민간으로 확산되었고 시장을 통한 유통의 단계로 넓어졌다. 집안을 꾸미고 장식하는 풍조에 따라 화려한 장식그림들이 선호되었고, 한 폭에 다양한 형태의 화면과 다채로운 畫目(화목)의 그림을 그려 완성하는 백납도병풍 제작이 성행하였다. 로텐바움박물관 소장 한국 컬렉션의 상당수는 독일 주재 조선국 총영사이자 독일의 사업가였던 하인리히 콘스탄틴 에두아르 마이어(Heinrich Constantin Eduard Meyer, 1841~1926)의 수집품이다. 그는 1890년대 후반부터 1905년까지 조선과 독일을 오가며 다양한 유물들을 수집하여 독일에 돌아가 1909년까지 순차적으로 수집품을 로텐바움박물관에 전달하였으며, <백선도>도 그 중 하나이다. 새롭고 장식미가 돋보이는 <백선도>는 조선에 들어와 있던 외국인들의 이목을 집중시키기에 충분했을 것이다. 로텐바움박물관 소장 <백납도>는 제2폭의 뒷면에 "동현(銅峴)"이라는 지명이 적힌 종이조각이 거꾸로 붙어있어 흥미를 끈다. 동현은 지금의 서울 을지로 1가와 을지로2가 사이에 위치했던 곳이며, 조선시대에는 도화서(圖畫署)를 비롯한 혜민서(惠民署)·장악원(掌樂院) 등의 관청과 시전(市廛)이 있어 가내수공업이 성하던 지역이었다. 실제로 1900년대 초 이곳에는 서화를 유통하는 상점들이 자리잡고 있었기 때문에, 마이어가 수집했던 서화들의 구입처가 동현에 위치했었을 가능성은 매우 높다고 하겠다. 로텐바움박물관 소장 <백선도>는 총 6폭의 병풍으로, 1980년대에 한국 서화 소장품들을 수리하는 과정에서 현재의 모습을 갖춘 것으로 보인다. 국립중앙박물관 소장 <백선도 초본>은 1945년부터 1950년 사이 국립민족박물관에 입수된 작품이다. <백선도 초본>은 총 7점으로, 7점 중 6면 화면의 여백에 화면의 순서까지 정해져 있어 본래 총 8폭 병풍용 초본임을 알 수 있다. 한 화면에는 5개 이상의 다양한 접선(摺扇)과 단선(團扇)들이 배열해있는데, 작은 장식에서부터 부챗살의 문양까지 초본부터 사실적으로 묘사되었음을 볼 수 있다. 여기에 '석간주(石間朱)', '홍(紅)', '묵(墨)', '청(靑)' 등과 같이 부채에 들어갈 색 대부분을 지정하고, 빈 부채에는 '유(油)'라고 적거나 비워두었으며 이 중 10개의 부채에는 화훼초충도(花卉草蟲圖)나 고사인물도의 밑그림이 남아있다. 이를 실제 로텐바움박물관 소장 <백선도>와 비교하면 화면의 크기와 비례까지 정확하게 일치하고 있어, 초본의 매뉴얼을 그대로 따르고 있음을 보여준다. 이 작품의 펼쳐진 부채 면에는 산수, 고사인물, 화조, 영모, 초충, 어해 등 다양한 장르의 그림이 그려져 있는데 화접도(花蝶圖)나 어해도(魚蟹圖) 등은 19세기 유행하였던 소재로 당시 화단의 경향을 잘 보여준다. 이 작품에서 주목할 것은 김홍도(金弘道)의 전형적인 화풍을 연상시키는 장면들이 다수 포함되어 있다는 점이다. 이는 지금까지 알려진 백선도나 백납도에서는 찾아보기 어려운 특징이다. 서원아집도(西園雅集圖)는 상대적으로 제한된 작은 화면에 그려야 하는 백납도나 백선도의 특성상 잘 다루지 않는 소재로, 국립중앙박물관 소장 김홍도의 <서원아집도>병풍과 화면의 구성이나 화풍 모두 매우 흡사하다. 더구나 <백선도>병풍의 몇몇 장면은 김홍도의 작품 중에서도 1796년작 《병진년화첩(丙辰年畫帖)》과 유사한 화면들을 다수 발견할 수 있어 흥미롭다. <사인암(舍人巖)>과 흡사한 산수도(山水圖)를 비롯하여 <서원아집도>, <쌍치도(雙雉圖)> 등에서 김홍도 화풍을 연상시킨다. 따라서 부채 속 그림을 그린 인물은 김홍도 화풍의 영향을 받은 직업화가일 것으로 보이며, 작가는 《병진년화첩》을 직접 감상한 적이 있거나, 서화시장에 《병진년화첩》을 베껴 그린 부본(副本)이 유통되었을 가능성이 매우 높다. 현재까지 알려진 병풍으로 된 백선도는 10점 내외인 것으로 파악되며, 이 작품들을 비교해보면 화면의 구성이 부채 1개 정도 차이가 있거나 비례와 좌우가 바뀌었을 뿐 화면구성이 매우 유사함을 찾아볼 수 있다. 이처럼 일정한 패턴의 화면구성은 같은 시기 민간에서 성행한 책가도(冊架圖)에서도 찾아볼 수 있는 특징으로, 19세기 서화의 수요층이 넓어짐에 따라 세밀한 표현과 화려한 장식성이 요구되는 회화들의 대량 제작을 위한 초본이 존재했음을 보여준다. 특히 도안이 복잡하여 범본이 필요한 곽분양행락도나 요지연도, 백동자도, 해학반도도 등의 규모가 큰 장식병풍에서 적극 활용되었으며, 실제 남아있는 작품에서 몇 가지의 도상들이 반복하여 등장하고 있어 초본을 참고했던 흔적을 찾아볼 수 있다. 시장의 수요에 맞추어 대량 제작할 수 있는 초본 활용이 성행했던 당시의 경향은 화면을 다채로운 부채들로 채우고 그 부채 면에 각기 다른 그림을 그려야하는 백선도 제작에 있어서도, 초본을 요긴하게 사용했음을 보여준다. 더구나 테두리를 그은 후 다양한 화목의 그림을 담는 백납도에 비해 백선도는 다양한 형태의 부채들을 먼저 그려야하는 공정을 거쳐야 했기 때문에, 대량 제작이 어렵고 그만큼 남아있는 작품이 상대적으로 적은 원인으로 생각된다. 이처럼 로텐바움박물관 소장 <백선도> 병풍과 국립중앙박물관 <백선도 초본>은 새로운 화풍이 수용되어 시도되었던 조선 말기 화단의 경향을 잘 보여주는 예라 하겠다. 다수의 백선도들이 박기준의 작품과 유사한 화풍과 화면 구성 보이는 것에 비해, 김홍도의 영향이 분명히 드러나는 매우 이례적인 예라는 점에서 앞으로도 더욱 심층적인 분석이 요구되는 작품이다.
본연구(本硏究)에서는 연구(硏究)의 대상(對象)을 저습답(低濕畓)에 두기보다는 지하수위(地下水位)가 낮은 점질토(粘質土)의 건답(乾畓)에 두고 이 점질토(粘質土)논에 대(對)한 수잉전(移秧前)의 처리(處理)에 있어서 심경(深耕)을 한 것 답면(畓面)을 건조(乾燥)시켜 구열발달(龜裂發達)을 기(期)하게한 것 및 암거(暗渠)가 설치(設置)된 곳에서의 답면(畓面)을 건조(乾燥)시켜 구열발달(龜裂發達)을 기(期)하게 한 것 중에서 어떤 처리방법(處理方法)을 적용(適用)한 것이 뿌리신장(伸長)이 심층화(深層化)되여 벼의 수량(收量)을 높일 수 있고 동시(同時)에 지하배수기능(地下排水機能)이 제대로 발휘(發揮)되여 수확작업(收穫作業)에 대형기계(大型機械)를 도입(導入)하였을 때 농업기계(農業機械)의 주행성면(走行性面)에서 유리(有利)한가를 발견(發見)코저 한 것이다. 그래서 시험구처리(試驗區處理)에 있어서는 (1)이앙(移秧) 39일전(日前)에 경운(耕耘)하여 풍건(風乾)시킨 것(경운구(區)) (2) 이앙(移秧) 39일전(日前)에 경운(耕耘)하여 물로 포화(飽和)시켜 쓰린후(後) 구열(龜裂)을 발생(發生)시켜 이앙(移秧) 2일전(日前)에 15cm 깊이로 경운(耕耘)한 것(균열구(區)) (3) 이앙(移秧) 39일전(日前)에 암거설치(暗渠設置)와 동시(同時)에 경운(耕耘)하여 물로 포화(飽和)시켜 쓰린후(後) 구열(龜裂)을 발생(發生)시켜 이앙(移秧) 2일전(日前)에 15cm 깊이로 경운(耕耘)한 것(균암구(區))의 3요인(要因)에 15cm. 25cm, 35cm 깊이의 3수준(水準)으로 하고 15cm 깊이 경운구(區)를 Control구(區)로 정(定)하였는데 이에 의(依)하여 얻은 시험결과(試驗結果)는 대략(大略) 다음과 같이 요약(要約)될 수 있다. 1. 소비수량(消費數量)은 균암구(區)에 있어서는 경운구(區) 및 균열구(區)보다도 소비수량(消費水量)을 나타냈다. 따라서 유효우량은 균암구(區)에서 가장 크고 경운구(區), 균열구(區)의 순(順)으로 작은값을 나타냈고 순용수량(純用水量)에 있어서는 여전(如前)히 균암구(區), 경운구(區), 균열구(區)의 순(順)으로 작어저 균암구(區)가 가장 큰 양(量)을 나타냈다. 심도(深度)에 불구(不拘)하고 순용수량(純用水量)의 크기는 균암구(區)에서 105cm 내외(內外), 경운구(區)에서 70cm 내외(內外), 균열구(區)에서는 45cm 내외(內外)를 나타냈다. 2. 뿌리중량(重量)이 구열최대심도(龜裂最大深度)에 예민(銳敏)하게 영향(影響)을 받고 있는 경향(傾向)으로 미루어 볼 때 뿌리 발달(發達)은 답면상(畓面上)의 구열(龜裂)에 의(依)하기 보다는 구열심도(龜裂深度)에 더 큰 영향(影響)을 받는 것으로 되어 있다. 따라서 깊은구(區)일수록 뿌리중량(重量)은 커지는 경향(傾向)을 가졌고 처리간(處理間)에는 균열구(區), 균암구(區), 경운구(區) 순(順)으로 증대(增大)하는 경향(傾向)을 가졌다. 3. 초장(草丈)의 신장(伸長)에 있어서는 어느구(區)를 막론(莫論)하고 생육초기(生育初期)(분얼최성기(分얼最盛期))에는 별(別)로 차이(差異)를 발견(發見)할 수 없으나 생육중기(生育中期)(분얼종료기(分얼終了期)부터 유수형성기(幼穗形成期) 사이에서는 심도(深度)가 깊은구(區)일수록 그 성장(成長)이 떨어지고 생육후기(生育後期)(수잉기)(穗잉期)에 접어들면서 부터는 도리여 심도(深度)가 깊은구(區)가 얕은구(區)보다 더 왕성(旺盛)한 신장(伸長)을 하였다. 이것은 시험처리별(試驗處理別)로 볼 때 생육중기(生育中期) 이후(以後) 균열구(區)는 어느 다른 구(區)보다 떨어지고 균암구(區)와 경운구(區) 간(間)에는 별차이(別差異)는 없으나 균암구(區)가 여간(與干) 초장신장(草丈伸長)이 우세(優勢)한 경향(傾向)을 나타냈다. 4. 경수(數)에 있어서는 전생육기간(全生育期間)을 통(通)하여 심도(深度)가 깊은구(區)일수록 그 수(數)가 적어지는 경향(傾向)을 나타냈고 이것을 시험처별(試驗處別)로 볼 때 균열구(區)는 늘 균암구(區)와 경운구(區)보다 떨어졌으며 또 경운구(區)는 균암구(區)보다 약간(若干) 우세(優勢)한 경향(傾向)을 나타냈다. 5. 수량(收量)(조곡중)(租穀重))에 있어서는 시험처리별(試驗處理別) 각(各) 시험구(試驗區)의 수량(收量)을 Control 구(區) 15-경운구(區)와 대비(對比)할 때 35-경운구(區)에 있어서는 17%, 35-암거구(區)에 있어서는 10% 기타구(其他區)에 있어서는 모두 Control구(區)와 같거나 떨어졌다. 그리고 전체적(全體的)으로 볼 때 심도(深度)가 깊은구(區)일수록 수량(收量)은 증가(增加)하였고 경운구(龜)는 균암구(區)보다, 균암구(區)는 균열구(區)보다 수량(收量)이 높았으며 심도구(深度區)에는 1%의 유의성시험처리(有意性試驗處理)에는 5%의 유의성(有意性)이 존재(存在)하였다. 6. 조곡중(粗穀重)에 더 많은 영향(影響)을 주는 감수심(減水深)은 후기감수심(後期減水深)이며 15cm 구(區)에서는 2.7cm/day 이내(以內)에서 25cm 구(區)에서는 3.0cm/day 이내(以內)에서 35cm 구(區)에서는 3.3cm/day이내(以內)의 범위(範圍)에서 감수심(減水深)이 증대(增大)하면 조곡중(粗穀重) 증대(增大)하였고 동시(同時)에 동일감수심(同一減水深)에서는 심도(深度)가 깊은구(區) 일수록 조곡중(粗穀重)은 증대(增大)하였다. 따라서 동일감수심도(同一減水深度)가 깊은구(區)일수록 수량면(收量面)에서 유리(有利)함을 암시(暗示)하고 있다. 7. 뿌리중량(重量)에서 비례(比例)하여 조곡중(粗穀重)은 증대(增大)하였으며 벼뿌리중량(重量)이 동일(同一)할때는 심도(深度)가 깊은구(區)일수록 조곡중(粗穀重)은 증대(增大)하는 경향(傾向)을 보여주고 있다. 또 시험처리별(試驗處理別)로 볼 때는 벼뿌리 중량(重量)은 균열구(區), 균암구(區), 경운구(區)의 순(順)으로 컸고 따라서 조곡중(粗穀重)도 역시(亦是) 같은 순(順)으로 컸다. 그리고 조곡중(粗穀重)은 중간낙수기간(中間落水期間)의 최소함수비(最少含水比)와 그때의 평균지온(平均地溫)에 관계(關係)되나 함수비(含水比)가 40%이하(以下)에서는 평균지온(平均地溫)은 함수비(含水比)에 비례(比例)하여 증가(增加)하는 경향(傾向)이 있음으로 주(主)로 최소함수비(最小含水比)에 영향(影響)을 받는바가 크다. 8. 짚조곡중비(粗穀重比)는 심도(深度)가 얕은구(區)일수록 커지는 경향(傾向)을 보였고 또 벼뿌리중량(重量)에 역지수함수적(逆指數函數的)으로 증대(增大)하였다. 또 같은 심도(深度)의 구(區)에서는 15cm 구(區)를 제외(除外)하고는 짚조곡중비(粗穀重比)는 감수심(減水深)에 비례(比例)하여 증대(增大)하였다. 감수심(減水深)이 어느 한도(限度)까지 증대(增大)됨에 따라 조곡중(租穀重)이 증대(增大)하지만 동시(同時)에 짚조곡중비(粗穀重比)도 증대(增大)함을 보여주고 있다. 9. 동일토성(同一土性)에서 구열량(龜裂量)은 기상조건(氣象條件) 특(特)히 증발량(蒸發量)의 증대(增大)에 따라 증대(增大)하며 답면건조도중(畓面乾燥途中)에 강우(降雨)가 있으면 답면구열량(畓面龜裂量)은 현저(顯著)히 감소(減小)한다. 점질토(粘質土)의 구열량(龜裂量)은 대체(大體)로 함수비(含水比)가 25% 이상(以上)에서는 함량비(含量比)에 역지수적(逆指數的)으로 증가(增加)하는 경향(傾向)을 보였고 구열(龜裂)의 최대(最大) 심도(深度)는 31% 이하(以下)의 함수비(含水比)에서는 일정(一定)한 값을 유지(維持)하는 경향(傾向)이있다. 10. Cone 지수(指數)는 어느 한도(限度)까지는 구열량(龜裂量)에 비례(比例)하는 경향(傾向)이있으나 구열량(龜裂量)이 어느 한도(限度)를 넘으면 약간(若干) 구열량(龜裂量)에 역비례(逆比例)하는 경향(傾向)을 보여주고 있다. 그 한도(限度)의 함수비(含水比)는 25% 근처가 될 것이다. 11. 최종낙수후 (最終落水後)의 Cone 지수(指數)의 경시적(經時的) 증대(增大)는 생육후기(生育後期)의 감수심(減水深)에 비례(比例)하는 경향(傾向)을 보였고 동일감수심(同一減水深)에서 균암구(區)는 다른 두 구(區)보다 큰Cone지수(指數)를 나타냈고 경운구(區)는 심도(深度)가 깊은구(區)일수록 균열구(區)보다 작은 Cone 지수(指數)를 나타냈는데 특(特)히 35-경운구(區) Cone의 지수(指數)는 현저(顯著)하게 작은 값을 나타냈다. 12. 최종낙수후(最終落水後)의 답면건조(畓面乾燥)에 있어서는 함수비(含水比)의 감소상황(減少狀況) 및 Cone 지수(指數)의 증대상황(增大狀況)에 비추어 볼 때 시험처리별(試驗處理別)로는 균암구(區)가 다른 두 구(區)보다 밟르고 경운구(區)는 가장 늦어지고 심도(深度)가 깊은 구(區)에서는 더욱 늦어지고 있다. 농업기계(農業 機械)의 주행(走行)에 지장(支障)을 가져오지 않을 정도(程度)의 Cone 지수(指數)(
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
본실험은 우리 나라 중부지방에 있어서의 수도의 재배 시기를 이동함에 따르는 실용제형질의 변화를 구명하기 위하여1958~'60년의 3개년에 걸쳐 농업시험장(현 작물시험장) 답작과(수원)에서 시행한 실험으로서 공시품종은 조만성, 초형 등 생태적특성을 달리하는 연산.수원 8002.오조.팔달 및 조광의 5품종을 공시하였으며, 파종기는 3월 2일 ~7월 10일까지를 10일 간격으로 14회에 걸쳐 파종하였고, 또 각 파종기마다 각각 못자리 일수를 30일, 40일, 50일, 60일, 70일 및 8일묘로 하여 이앙하여 실험하였다. 그 결과를 요약하면 다음과 같다. 1. 출수기 : 1) 파종기가 지연됨에 따라서 출수기도 거의 일직선으로 지연되나, 그 정도는 조생종에서 크고 만생종은 작으며, 또 못자리 일수가 길어짐에 따라서 커진다. 2) 출수까지의 일수는 각 품종 모두 파종기의 지연에 따라서 거의 일직선으로 단축하나, 품종에 따라 그 정도의 차이가 있어서 조생종은 단축일수가 작고 만생종이 크다. 그리고 동일품종 내에서도 못자리 일수가 길어짐에 따라 단축일수는 작아졌다. 또 최단축일수에 도달하는 시기도 조생종은 빠르나 만생종은 늦어진다. 또 못자리 일수가 긴 구에서 그 시기는 빨라진다. 품종 및 못자리 일수에 따라 차이가 있으나 어느 시기 이후의 파종기가 되면 단축을 나타내지 않게 되고, 다시 파종기가 늦어지면 한냉한 기후의 영향을 받아 출수일수는 오히려 연장된다. 3) 파종기(X)와 출수까지의 일수(Y)와의 회귀직선식 Y=a+bX의 계수 b(출수일수단축율)와 평균일수일수와는 고도의 상관이 인정되며, 평균출수일수가 클수록, 즉 만생종일수록 파종기의 지연에 의한 출수촉진일수가 컸었다. 4) 어느 품종의 파종기가 동일역일이면 못자리 일수가 극단으로 길지 않은 범위 내에서는(파종기의 지연에 따라서 출수까지의 일수가 직선적으로 단축되는 범위내에서의) 출수일수의 년차간의 변이는 크지 않으므로 목적하는 품종에 대한 수회의 파종기에 걸쳐 출수기의 변동을 조사하여 실험식(파종기와 출수까지의 일수와의 회귀직선식)을 구해 두면 임의의 재배시기에 있어서의 출수기를 추정할 수 있다. 5) 파종기가 3월하순~6월중순, 못자리 일수가 30~50일의 범위에서는 보통기재배에 있어서의 품종의 출수기의 조만을 가지고 그 전후에 해당하는 파종기에 있어서의 각각의 품종에 대한 출수기를 추정할 수 있다. 2. 성숙기 : 6) 출수기가 지연됨에 따라서 성숙한계 출수기의 범위 내에서는 성숙기도 거의 일직선으로 지연된다. 그 정도는 품종 및 못자리 일수의 장단에 의한 차이가 크다. 평균온도의 영향을 받는 범위 내에서는 출수기(X)가 지연됨에 따라서 성숙기간 중의 평균온도(Y)는 그것에 따라서 저하하며 품종간에 차이가 있으나, 전체적으로 보아 양자의 관계를 8월 1일부터 9월 13일까지의 범위에서는 Y=25.53-0.182X의 회귀직선식으로 나타낼 수 있다. 7) 품종의 조만생에 의한 성숙기간에 있어서의 평균온도의 차이가 심하며, 조생종은 최고 28
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70