• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권4호
• /
• pp.293-298
• /
• 2011

In this paper, we propose a new image descriptor, that is, a rotation invariant histogram of oriented gradients (RIHOG). RIHOG overcomes a disadvantage of the histogram of oriented gradients (HOG), which is very sensitive to image rotation. The HOG only uses magnitude values of a pixel without considering neighboring pixels. The RIHOG uses the accumulated relative magnitude values of corresponding relative orientation calculated with neighboring pixels, which has an effect on reducing the sensitivity to image rotation. The performance of RIHOG is verified via the index of classification and classification of Brodatz texture data.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.108-113
• /
• 2007

This study aims to find equivalent comfort contours, reciprocal of frequency weighting curves, for vertical steering wheel vibration. Psychophysical responses were measured from twelve male subjects by using magnitude estimation of relative discomfort due to vertical steering wheel vibrations of magnitude of 0.1 to 1.58 $m/s^2$ in the frequency range of 4 to 250 Hz. Relative discomfort were estimated with a reference vibration of 0.4 $m/s^2$ at 31.5 Hz. Equivalent comfort contours were produced from the median of sensation magnitudes judged by twelve subjects, which showed variation in the shapes with increase of vibration magnitude. A shape of the contour came close to the perception threshold curve with decrease of vibration magnitude. When the vibration magnitude increases, the shape changed close to those in the references of Hong and et al (2003). It is also recommended frequency weighting curves for vertical steering wheel vibration must be expressed as a function of vibration magnitude as well as frequency.

• Journal of electromagnetic engineering and science
• /
• 제10권2호
• /
• pp.73-77
• /
• 2010

This paper proposes a novel memory effect measurement technique in RF power amplifiers(PAs) using a two-tone intermodulation distortion(IMD) signal with a very simple and intuitive algorithm. Based on the proposed predistortive tone cancellation technique, the proposed measurement method is capable of measuring the relative phase and magnitude of the third-order and fifth-order IMDs, as well as the fundamental signal. The measured relative phase between the higher and lower IMD signal for specific tone spacing can be interpreted as the group delay(GD) information of the IMD signal concerned. From the group delay analysis, we can conclude that an adaptive control of GD as well as the magnitude and phase is a key function in increasing the linearization bandwidth and the dynamic range in a predistortion(PD) technique.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.646-649
• /
• 2014

Performances of spectrum-sliced channels are strongly affected by their relative intensity noise (RIN). We use polarization-independent optical modulators (PIOMs) for spectrum-sliced channels to suppress their RIN. The PIOM driven by a high sinusoidal voltage signal evenly redistributes optical frequency components in the spectral domain and reduces the RIN. It can be used at a broadband light source (BLS) output to produce spectrum-sliced channels having lower RIN values. Also, it can be used for each spectrum-sliced channel within each optical network unit (ONU). In our experiment, where 12.5-GHz-spaced spectrum-sliced channels are used in 1-GbE speed, the use of PIOM at the BLS output reduces the bit error rate (BER) of the spectrum-sliced channel by more than an order of magnitude. The use of PIOM within the ONU reduces the BER by approximately 3 orders of magnitude.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.415-418
• /
• 1996

Etching Process, one of the most important process in semiconductor fabrication, has input control part of which components are pressure, gas flow, RF power and etc., and plasma gas which is complex and not exactly understood is used to etch wafer in etching chamber. So this process has not real-time feedback controller based on input-output relation, then it uses EPD(End Point Detection) signal to determine when to start or when to stop etching. Various type EPD controller control etching process using EPD signal obtained from optical intensity of etching chamber. In development EPD controller we concentrate on compensation of this signal intensity and setting the relative signal magnitude at first of etching. We compensate signal intensity using neural network learning method and set the relative signal magnitude using fuzzy inference method. Potential of this method which improves EPD system capability is proved by experiences.

• 천문학회지
• /
• 제27권1호
• /
• pp.55-60
• /
• 1994

The 3mm transitions to CO, $^{13}CO,\;CS,\;HCO^+$, and HCN have been observed toward the compact HII regions in W58 using the 14m Daeduk Radio Telescope (DRT). Some of the observed lines show high-velocity wings resulted from outflowing materials of the compact HII regions. We derive the beam averaged column densities of the observed species and compare their relative abundances. The $HCO^+$ abundance appears to be smaller by about an order of magnitude than those of 'typical' quiet molecular clouds. CS may be a good reference molecule in comparing relative abundances in different physical conditions.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.57-69
• /
• 1997

All of the Tsumami which affected severly the east coast of the Korean Peninsula in the years 1741-1993 are caused by earthquakes occurred along the boundary sea of Japan and norther Honshu. These earthquakes with magnitude greater than 7.0 are results of relative movement between the North American Plate and Urasian Plate. The active fault along the boundary of the two plates is attracted by many researchers since the 1983 May earthquake of magnitude 7.7. It is important to anticipate when the next large earthquake will occur and how much it affect the east coast of Korea. Among a few models of spatial seismic gap were proposed for earthquake occurrences accompanying Tsunami, Ishikawas' east-west seismic gap model is the most probable one. There is a tendency that the period between the activities of the active faults becomes shorter. It is expected that a large earthquake of magnitude 7.0 or above will occur along the eastern boundary of Japan Sea at the end of this century and produce Tsunami at the east coast of Korea.

• 디지털산업정보학회논문지
• /
• 제7권2호
• /
• pp.115-125
• /
• 2011

An accurate estimation of software development size is an important factor in calculating reasonable cost of project development and determining its success. In this study, we propose estimation models, using function point based on the functional correlation between software, with empirical data. Three models($FP_{est}(I)$, $FP_{est}(II)$, $FP_{est}(III)$) are developed with correlation and regression analysis. The validity of the models is evaluated by the significance test by comparing values of Mean Magnitude of Relative Error (MMRE) and predictions of each model at level n%. Model $FP_{est}(III)$ proved to be superior to other models such as IFPC(Indicative Function Point Count), EFPC(Estimated Function Point Count), EPFS(Early Prediction of Function Size), $FP_{est}(I)$, and $FP_{est}(II)$. As a result, the accuracy of the model appears to be very high to determine the usefulness of the model to finally overcome weakness of other estimation models. The model can be efficiently used to estimate project development size including software size or manpower allocation.

• 대한전자공학회논문지TC
• /
• 제38권1호
• /
• pp.14-19
• /
• 2001

초고주파 대역의 전력증폭기로 주로 사용되는 트랜지스터는 전력 효율 측면에서 AB급 또는 B급 바이어스로 동작하게 된다. 고출력 트랜지스터가 AB급 바이어스 또는 B급 바이어스로 동작하게 되면 트랜지스터의 입력전력의 증가에 따라 3차 혼변조 성분에 Sweet spot이 발생하게 된다. 본 논문은 고출력 트랜지스터를 AB급 바이어스로 동작시켜 발생한 Sweet spot에서의 3차 혼변조 신호의 상대적인 위상 변화량은 실험을 통하여 측정하였다. 실험 결과로 3차 혼변조 신호의 Sweet spot에서의 약 $180^{\circ}$ 정도의 상대적 위상 변화량이 발생함을 측정하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.97-100
• /
• 2006

This paper report the result of the investigation on the properties of drying shrinkage for alkali-activated slag mortar in different relative humidity Commonly we know that drying shrinkage means lost more moisture but the mechanism of drying shrinkage of alkali activated slag mortar is not entirely due to the quantity of weight loss of water from mortar. pore size distribution and the calcium silicate hydrate gel characteristics have a critical influence on the magnitude of drying shringkage to alkali activated slag mortar. For this investigation, Ca(OH)2, Na2SiO4 were as alkali activator with 5 dosages(6%, 9%, 12%, 15%, 20%) and curing condition were three different relative humidity(35%, 65%, 95%) at $20{\pm}3^{\circ}C$