• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.1
• /
• pp.47-56
• /
• 2009

Purpose: To find optimized luminosity factor of color from light transmission filter. Methods: To make $Y_{1-x}G_{x}$, $Y_{1-x}P_{x}$ by using CR-39 compound within dipping method, mixing up Y(Yellow), G(green) and P(pink) for optimize eye sensitivity. Modeling for relative luminous efficiency(relative sensitivity) curves in Luminose transmission, it could be resolved by Multiplying sensitivity of eye within transmission rate of Lens ($P_f({\lambda}=T({\lambda}){\cdot}P({\lambda}).)$.). To evaluate Wavelength between 400~700 nm, relative luminous efficiency curve in Area and Height value is being used. Results: In color filter of $Y_{1-x}G_{x}$ position of x equals to 0.04, 0.1, 0.08, 0.12, 0.14, 0.5 at ${\beta}=S_1/S_0{\cdot}100$ each consist value of 76.1, 77.9, 80.7, 81.6, 80.2, 18.6 In color filter of $Y_{1-x}P_{x}$ position of x equals to 1.00, 0.2, 0.6, 0.8 at ${\beta}=S_1/S_0{\cdot}100$ each consist value of 74.3, 74.0, 70.5, 33.0 The result from experiment $Y_{1-x}P_{x}$ value less than $Y_{1-x}G_{x}$, from evaluating luminous efficiency curve and test was successfully optimized. Conclusions: Optimized relative luminous efficiency curve result have value of X=0.12-0.14 at $Y_{1-x}G_{x}$.

• Journal of Bio-Environment Control
• /
• v.12 no.1
• /
• pp.12-16
• /
• 2003

The effect of humidifying methods on the mean size of droplets ejected from humidifier and distributions of relative humidity in a graft-taking enhancement system (GTES) was investigated. The mean sizes of droplets ejected from an ultrasonic humidifier and a steam humidifier with electrodes were 7.58$\pm$0.14 and 9.01$\pm$0.06 $\mu$m, respectively. Assuming that the particles ejected from humidifiers were mutually combined with distance, the mean diameter of droplets became larger as the distance apart from the outlet of humidifiers increased. When the relative humidity in GRS was controlled at 90％ using the ultrasonic humidifiers, the average relative humidity at the height of 0.4, 1.1 and 1.8 m were 92.1$\pm$5.3, 90.9$\pm$5.6, and 89.7$\pm$6.8%, respectively. However, the average relative humidity using the steam humidifier with electrodes showed 93.4 $\pm$5.4, 90.7$\pm$5.9, and 89.3$\pm$7.0%, respectively. Therefore, it was concluded that humidification by ultrasonic humidifier would be appropriate for the uniform distribution of relative humidity in GTES.

• Korean Journal of Remote Sensing
• /
• v.33 no.2
• /
• pp.171-187
• /
• 2017

Thisstudy presentsthe method for deriving surface visibility from satellite retrieved AOD. To do thisthe height of aerosol distribution isrequired. This distribution would be in thisstudy represented by the two heights; if there is a discrete atmospheric layer, which is physically separated from the above layer, the upper height of the layer is assumed as Aerosol Layer Height(ALH). In this case there is clear minimum in the Relative Humanity vertical distribution. Otherwise PBLH(Planetary Boundary Layer Height) is used. These heights are obtained from the forecast data of Regional Data Assimilation and Prediction System(RDAPS). The surface visibility is estimated from MODIS AOD and ALH/PBLH, using Koschmieder's Law for ALH and the empirical relations for PBLH. The estimated visibility are evaluated from the visibility measurements of 9 eve-measurement stations and 17 PWD22 stations for the spring of 2015 and 2016. Verification of the estimated visibility shows that there are considerable differencesin statistical verification value depending on stations, years, morning(Terra)/afternoon(Aqua). The better results are shown in the midwest part of korean peninsula for Terra of 2016. The results are summarized as; correlation coefficients of higher than 0.65, for low visibility RMSE of 3.62 km and ME of 2.29 km or less, POD of higher than 0.65 and FAR of 0.5 or less. Verification results were better with increase in the number of low-visibility data.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.380-390
• /
• 1994

This study was conducted to investigate the effects of the topographical factors (16 items), physico-chemical properties of soil (13 items) and meteorological factors(9 items) on the height growth of Pinus thunbergii stands along the coastal area in Korea. According to the coefficients by partial correlation analysis in total area, it was found that tree height growth was considerably affected by local topography, soil hardness, soil B-horizental depth, effective soil depth, soil moisture, parent rock, soil texture, and etc.. And the soil factors were available $P_2O_5$, total nitrogen, base saturation, exchangeable $Ca^{{+}+}$, and etc.. In partial correlation analysis, annual relative humidity, annual precipitation, index of aridity, and etc. were found to be the most important factors influencing on tree height growth of Pinus thunbergii stands. In conlusion, the topographical, soil and meteorological factors have multiplex influence on the tree height growth in the Pinus thunbergii stands. They promise to provide the basis of improving not only the selection of suitable sites and the management of soil fertilizer but also the estimation of growth and yield. Hence these results would be used successfully for the design in the scientific forest working plan.

• Wind and Structures
• /
• v.9 no.4
• /
• pp.315-330
• /
• 2006

Flow and scalar dispersion around Cheomseongdae are numerically investigated using a three-dimensional computational fluid dynamics (CFD) model with the renormalization group (RNG) $k-{\varepsilon}$ turbulence closure scheme. Cheomseongdae is an ancient astronomical observatory in Gyeongju, Korea, and is chosen as a model obstacle because of its unique shape, that is, a cylinder-shaped architectural structure with its radius varying with height. An interesting feature found is a mid-height saddle point behind Cheomseongdae. Different obstacle shapes and corresponding flow convergences help to explain the presence of the saddle point. The predicted size of recirculation zone formed behind Cheomseongdae increases with increasing ambient wind speed and decreases with increasing ambient turbulence intensity. The relative roles of inertial and eddy forces in producing cavity flow zones around an obstacle are conceptually presented. An increase in inertial force promotes flow separation. Consequently, cavity flow zones around the obstacle expand and flow reattachment occurs farther downwind. An increase in eddy force weakens flow separation by mixing momentum there. This results in the contraction of cavity flow zones and flow reattachment occurs less far downwind. An increase in ambient wind speed lowers predicted scalar concentration. An increase in ambient turbulence intensity lowers predicted maximum scalar concentration and acts to distribute scalars evenly.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2343-2350
• /
• 2013

The wave height distributions in front of a vertically perforated wall structures for obliquely incident uni-directional irregular waves are mainly investigated by using 3D hydraulic experiments. The difference and similarity of wave propagation along the plain and perforated wall structures are investigated and particularly the effects of side walls in chamber and relative chamber width are analyzed. This study shows that the wave height distribution patterns for normalized wave heights in front of structure is significantly different between the plain and perforated wall structures, and the side wall in the chamber suppresses the growth of waves.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.19.1-24
• /
• 1998

Designers often hesitate to decide the shape, size, and layout of a product. Though ergonomic principles and data are absolutely needed in this process, they don't have enough guidelines to refer. For the refrigerator designers, they also are not convinced of their decision: the vertical position of the freezing and refrigerating rooms, the height of shelves, the shape of door-handle, and etc. To support the refrigerator design, we applied several ergonomic methods to the evaluation of a refrigerator. EMG measurement was used to evaluate the load of user's lumbar muscle. Based upon the experimental EMG data, we developed a model to predict the relative load according to the height of refrigerator shelves. Two different layouts of a refrigerator, R/F and F/R style, were compared with the model. A three-dimenaional motion analysis method was used to evaluate the user's motion of using a refrigerator. Ten door-handles with the different shapes and positions were evaluated by tracking the rotations of the user's arm. Video protocol analysis was used to evaluate the user interface of a control panel in a refrigerator. Finally, we made several ergonomic design guidelines based on the facts found in this research and the anthropometric data of the Korean adults. The results of this study can be applied to the ergonomic design of a refrigerator.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.3
• /
• pp.193-201
• /
• 2020

The mesh selectivity of a drum shaped pot for finely-striate buccinum (Buccinum striatissimum) was conducted a total of eight times with four different mesh sizes (22, 35, 50 and 60 mm) from May to September, 2019 in the eastern coastal waters of Korea. The size selectivity analysis was estimated by the SELECT method to express logistic selectivity curves. In the results, the catch of finely-striate buccinum was occupied about 90% in the total catch weight. The equation of the master curve of selectivity was estimated to s(R) = exp(-7.778R+9.983)/[1+exp(-7.778R+9.983)]. The relative shell height of 50% selection was 1.284 and the selection range (SR) was 0.282. The optimal mesh size for 50% selection on the minimum maturation size (75 mm, Shell height) was estimated more than 60 mm by the master selectivity curve.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.582-585
• /
• 2004

Oyster fanning structures in tidal flats are well detected by SAR system. Each frame of these artificial structures is composed of two vertical and one horizontal wooden pole. We investigate characteristics of polarimetric features in the target structures. In this paper, the results of AIRSAR L-band POLSAR data and experiments in laboratory are discussed. The ratio of single bounce to double bounce scattering depends of vertical pole height, direction of horizontal pole to radar look direction, and incidence angle as well as sea surface condition. We have conducted laboratory experiments. According to target scale, Ku-band and targets downsized by scale of 10 are used. The results of the experiments are summarized as: i) total power of the backscattering is more affected by vertical poles than a horizontal pole; ii) and backscattering from a horizontal pole is sensitive to the relative radar look direction to target array. We conclude that water level can be effectively measured by using interferometric phase and backscattering intensity if vertical poles in the water are observed by L-band HH- or VV-polarization. Measurement of tide height can be further improved if double bounced components are separated from fully polarized SAR data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.109-121
• /
• 1999

In this paper, HF band LPDA(Log-periodic Dipole Antenna) and MLPDA(Modified Log-periodic Dipole Antenna) above lossy grounds were analyzed using moment method by considering the practical media parameter of lossy grounds, not assuming free space or perfect ground approximation. The radiation pattern and gain of LPDA and MLPDA as functions of frequency, antenna height from ground, and antenna tilt angle are presented, and the lossy ground effect on antennas characteristics are described. MLPDA was found to exhibit a smaller variation for gain and radiation pattern and a higher maximum beam direction relative to LPDA. It was shown that media parameter of lossy grounds and antenna height have a direct influence on the antenna gain of both LPDA and MLPDA.