• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.302-309
• /
• 2017

The influence of the pile diameter, center to center pile spacing, internal friction angle of embankment soil, and height of embankment on the arching efficacy of the embankment pile was investigated. The arching efficacy, which was derived by the arch model developed in the embankment soil was calculated using two methods, one that considers crown failure of the arch and the other that considers load on the pile cap and critical relative spacing ratio for which the arching efficacy calculated by the two methods are the same. According to the computed results in this study, the arching efficacy calculated from a consideration of the load on pile cap governs when the relative spacing ratio becomes smaller and that calculated from the theory of crown failure governs when the relative spacing ratio becomes larger. The critical relative spacing ratio below which the arching efficacy calculated from a consideration of the load on pile cap governs the design decreases with increasing value, which is defined by the ratio of the pile diameter to the pile center to center spacing. Critical relative spacing ratios, which correspond to the values of 0.5 and 0.2 were 0.35 and 0.85, respectively. Considering the computed results, the critical relative spacing ratio decreases with increasing Rankine passive earth pressure coefficient and critical relative spacing ratios, which correspond to values of 5 and 2, were 0.23 and 0.85, respectively. The arching efficacy, which corresponds to the area ratio of 9%, was 54% and the one that corresponds to the value of 3 was 61%; the critical relative spacing ratios, which correspond to those arching efficacies, were greater than 0.5.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.3
• /
• pp.161-168
• /
• 2000

The experiment was carried out to investigate the effect of extension of grazing duration in late autumn on grass growth in following spring, in order to improve the rate of self-sufficiency for roughage feed. Plant height, total biomass and litter production of herbage were increased when the grazing was finished early in late autumn. The proportions of clover and litter, and amounts of animal intake were decreased, with extended grazing duration in late autumn. But when the grazing was finished late in autumn, the contents of crude protein (CP, %) of herbage were increased, contents of acid detergent fiber (ADF, %), neutral detergent fiber (NDF, %) and crude ash (%) were decreased in pasture after grazing, therefore the contents of total digestible nutrients (TDN, %) and relative feed value (RFV) of herbage were improved. The early end grazing showed that plant height, total biomass and litter production of herbage in following spring were higher than those in late end grazing. However, increased yields were not significantly different among end grazing treatments (0.12-0.15 tonha), except for the final end grazing in late autumn (0.01 tonha). With extended grazing duration in late autumn, the contents of CP of herbage in following spring were increased, contents of ADF, were decreased, and RFV were improved. (Key words : Extension of grazing duration, Plant height, Biomass, Amount of intake, Increased yield, Crude protein, TDN) rll\ulcorner c# qiil x i 9 ~ 1 a% * (College of Natural Resources, Taegu Univ., Kyongsan, 71 2-714, Korea) * $4 4 qiil 34 qq(Co1lege of Liberal Arts & Sciences, Yonsei Univ., Wonju, 220-701, Korea) '* 8 * jL@%ft@ &@%(Faculty of Agriculture, Hokkaido Univ., Sapporo, 060 Japan)

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.616-624
• /
• 2011

The flow characteristics and heat transfer augment on the periodically arranged semi-circular ribs in a rectangular channel for turbulent flow has been investigated numerically. The aspect ratio of the rectangular channel was AR=5, the rib height to hydraulic diameter ratio were 0.07 and rib height to channel height ratio was set as e/H=0.117 for various PR(rib pitch-to-rib height rate) between 8~14, respectively. The SST k-${\omega}$ turbulence model and v2-f turbulence model were used to find out the heat transfer and the flow characteristics of near the wall which are suited to obtain realistic phenomena. The numerical analysis results show turbulent flow characteristics, heat transfer enhancement and friction factor as observed experimentally. The results predict that turbulent kinetic energy(k) is closely relative to the diffusion of recirculation flow. and v2-f turbulence model simulation results have a good agreement with experimental values.

• Journal of architectural history
• /
• v.21 no.3
• /
• pp.29-44
• /
• 2012

If cultural Heritageis located in the downtown, conservation areas was developed or is being developed In most cases Therefore, in this case, the relative height of the building during construction than the regulatory limit is reasonable, is emerging need to be objectified. This study was utilizes GIS analysis techniques for 'View Corridor' and building height standards were determined. First, 'View Corridor' set and building height restrictions for the analysis of urban environmental factors were analyzed in. In particular, the topography and urban planning, and existing buildings, including the distribution of the physical urban environment, with detailed analysis on the major historical and cultural assets with a combination of a review of the impact factor for the formation of the urban landscape recognize the scope has been expanded. Second, the key selection criteria for View point largely focused on cultural Heritageand the surrounding communicative point of view and, consequently, connectivity, and symbolism, accessibility, analysis, factors such as Prospect, setting the standards by applying a detailed assessment of each item the main view point were derived. Third, the derived key View point on the terrain and landscape characteristics simulation analysis carried out by considering together the main axis, and this suggests a reasonable height for the proposed standards.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.11
• /
• pp.1009-1014
• /
• 2013

In the present study, using a variation of rib height, the transient response and the performance are investigated. The cell voltage is acquired according to the current density change($0.8A/cm^2$ to $1.0A/cm^2$) under same stoichiometry and relative humidity. The different level of undershoots appeared at the different clamping pressure(1.5MPa and 2.0MPa) and different rib height. At 1.5MPa clamping pressure, rib manufactured cut at $100{\mu}m$ height goes to steady state faster than reference plate and has lower maximum undershoot voltage. But performance is lower than reference plate due to increasing contact resistance.

• The Korean Journal of Malacology
• /
• v.22 no.2
• /
• pp.135-141
• /
• 2006

This paper describes relative age and growth pattern of the blood cockle, Tegillarca granosa (Linnaeus) in Yeoja Bay, southern coast of Korea. The young shell of blood cockle that spawned from July to August reached 5.60 mm $({\pm}\;1.07)$ in shell height in October. Slow growing season was estimated to be from October to the next May with water temperature under $23^{\circ}C$. With warm water temperature in July to September, the growth was fast. The young shells reached 29 percentage of asymptotic shell height 11-15 months after spawning. Growth was estimated by von Bertalanffy growth function as follows. $I_t(sh_t)=46.1317\;(1-e^{-0.4997(t-0.5828)})$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.3
• /
• pp.201-207
• /
• 2017

Hay-making is one of the most common forage preservation practices in livestock operations. The objective of hay-making is to minimize nutrient loss by shortening field drying time. Measuring the impacts of cutting height of forage crop is necessary to optimize hay production balancing yield and quality, in order to obtain substantial biomass increase through harvest of regrowth. This experiment was conducted to investigate the impact of cutting height of rye (Secale cereale L.) on drying rate and hay quality. Heading stage rye was harvested at 8cm or 15cm stubble heights. Hay was daily tedded at 09:00 and sampled at 09:00, 13:00 and 17:00 to determine moisture content (MC). After two month of preservation, CP (crude protein), ADF (acid detergent fiber), NDF (neutral detergent fiber), IVDMD (in vitro dry matter disappearance), TDN (total digestible nutrient), RFV (relative feed value), DM (dry matter) loss, visual scores and total fungi count were determined for estimation of hay quality. Cutting height at 15cm could enhance the drying rate and CP content (p<0.05), but also increases DM loss (p<0.05) compared to cutting at 8cm. Cutting heights did not affect ADF, NDF, IVDMD, TDN and RFV value (p>0.05). Visual scores of rye hays cutting at 8cm and 15cm, ranged from 83 to 85. Cutting at 8cm tended to maintain higher core bale temperature and fungal count than cutting at 15cm during preservation, but there was no significant difference.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.5
• /
• pp.15-23
• /
• 2021

This study was carried out to suggest an appropriate plant combination by evaluating the growth of flowering ground-cover plants planted with Festuca glauca 'Eljiah Blue' on the roof-top environment. As for the plant materials, Allium senescens and Chrysanthemum coreanum which are shorter than Festuca glauca 'Eljiah Blue' and Sedum takesimense and Agastache rugosa which are taller than Festuca glauca 'Eljiah Blue' were selected. Festuca glauca 'Eljiah Blue' was planted on Conrol, and Festuca glauca 'Eljiah Blue' with Allium senescens (T1), Festuca glauca 'Eljiah Blue' with Sedum takesimense (T2), Festuca glauca 'Eljiah Blue' with Agastache rugosa(T3), and Festuca glauca 'Eljiah Blue' with Chrysanthemum coreanum (T4) were planted in each experimental plot. Plant height and covering rate were measured to evaluate the growth of Festuca glauca 'Eljiah Blue'. Also, relative growth rate (RGR) of plant height, RGR of plant width, and mortality rate of the flowering ground-cover plants were estimated. Plant height and cover rate of Festuca glauca 'Eljiah Blue' was greatest in T3. RGR of plant height was greater in the order of Agastache rugosa, Allium senescens, Chrysanthemum coreanum, and Sedum takesimense. In particular, RGR of plant width was also greatest for Agastache rugosa. Mortality rates of Agastache rugosa and Allium senescens were lowest at 11%. Therefore, based on good growth of Festuca glauca 'Eljiah Blue' planted with Agastache rugosa, these results were suggested as a desirable combination of plant species for rooftop gardening.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.6
• /
• pp.577-585
• /
• 2003

The purpose of this study was to investigate eating behavior, nutritional status and health conditions of college students attempting a weight control. The subjects are 88 students of the Daegu area. Their weight, height, triceps, and mid-arm circumference were measured and their dietary intake and eating behavior were obtained by using questionnaires. The 24-hour recall was obtained from the subjects. The results are summarized as follows: The average height, weight and BMI of the attempt and no-attempt male and female students were 171.2cm, 70.7kg and 24.1; 170.4cm, 79.9kg and 27.5; 159.3cm, 60.9kg and 24.0; 157.7cm 60.1kg and 24.2, respectively. Energy intake of the attempt and no-attempt male and female group was 63.9%, 61.8%, 76.2% and 83.9% of RDA respectively. Protein intake of each group was 97.5%, 83.9%, 60.1% and 67.3% of RDA respectively. The following items registered a negative correlation weight and carbohydrate, weight and Na intake, weight and vitamin C intake, PIBW and Na intake, TSF and fiber intake, TSF and Na intake, TSF and vitamin C intake, MAMC and Na intake, and MAMC and vitamin C intake. A relative magnitude of factors affecting weight control was analyzed by Stepwise multiple regression analysis. Overall results about relative influence of independent variables to the dependent variable(weight control) indicated that the BMI (p<0.01) was the most significantly correlated with weight control in all subjects. The results of this study suggest that the extensive nutrition education in the weight control program should be emphasized to prevent obesity early.

• Journal of the Korea Concrete Institute
• /
• v.15 no.5
• /
• pp.759-767
• /
• 2003

This paper presents the simplified but more rational analysis method for the prediction of additional internal forces induced in integral abutment bridges. These internal forces depend upon the degree of restraint provided tc the deck by the backfill soil adjacent to the abutments and piles. In addition, effect of the relative flexural stiffness ratio among pile foundations, abutment, and superstructure on the structural behavior is also an important factor. The first part of the paper develops the stiffness matrices, written in terms of the soil stiffness, for the lateral and rotational restraints provided by the backfill soil adjacent to the abutment. The finite difference analysis is conducted and it is confirmed that the results are agreed well with the predictions obtained by the proposed method. The simplified spring model is used in the parametric study on the behavior of simple span and multi-span continuous integral abutment PSC beam bridges in which the abutment height and the flexural rigidity of piles are varied. These results are compared with those obtained by loading Rankine passive earth pressure according to the conventional method. From the results of parametric study, it was shown that the abutment height, the relative flexural rigidity of superstructure and piles, and the earth pressure induced by temperature change greatly affect the overall structural response of the bridge system. It may be possible to obtain more rational and economical designs for integral abutment bridges by the proposed method.