• 생물환경조절학회지
• /
• 제1권2호
• /
• pp.135-141
• /
• 1992

자연광과 자연광에 인공광을 이용한 보광처리시 형광등, 백열등, 고압나트륨등으로 인공광의 종류를 달리하였을 때 백경채, 탑채, 상추, 쑥갓 및 잎들깨의 생육에 미치는 영향에 대한 실험결과를 요약하면 다음과 같다. 1. 전반적으로 대조구보다 보광처리구의 생육이 양호하였다. 2. 고압나트륨등처리구에서는 생육이 양호하여 엽중량비가 낮고, 엽면적이 넓으며 엽중이 무거워 외관상 상품가치가 높았으며 백열등처리구에서는 생체중은 무거웠으나 도장하여 상품성이 저하되었다. 형광등처리구에서는 고압나트륨등에 비하여 생육이 크게 떨어지지 않았다. 3. 엽록소의 상대적 함량은 전반적으로 큰 차이는 없었으나 고압나트륨등의 처리구에서 다소 높았다. 4. Vitamin C의 함량은 처리간 큰 차이는 없었으며 광 종류에 따라 작물마다 다른 반응을 나타내었다.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 2000년도 Proceedings of 2000 KSAM International Symposium and Spring Meeting
• /
• pp.78-89
• /
• 2000

Protein secretion in filamentous fungi has been shown to be restricted to actively growing hyphal tips. To determine whether an increase in the amount of growing surface area of a fungus can lead to an increase in the amount of protein secretion, we examined secretion in a temperature-sensitive Neurospora crassa mcb mutant that shows a loss of growth polarity when incubated at restrictive-temperature. Incubation of the mcb mutant at restrictive-temperature results in a three- to five-fold increase in the level of extracellular protein and a 20- fold increase in carboxymethyl cellulase activity relative to a wild-type strain. A mutation in the cr-l gene has been shown previously to suppress the apolar growth phenotype of the mcb mutant, and we find that the level of extracellular protein produced by a mcb; cr-l double mutant was reduced to that of the wild-type control. Immunolocalization of a secreted endoglucanase revealed that proteins are secreted mainly at hyphal tips in hyphae exhibiting polar growth and over the entire surface area of bulbous regions of hyphae that are produced following a shift of the mcb mutant to restrictive-temperature. These results support the hypothesis that secretion of extracellular protein by a filamentous fungus can be significantly increased by mutations that alter growth polarity.

• 한국결정성장학회지
• /
• 제16권1호
• /
• pp.38-42
• /
• 2006

본 1부 연구에서는 스파크 플라스마 열에 의한 그린 세라믹의 소결에서 열전달 및 가압력으로 인한 상대밀도의 변화를 유한요소법(FEM)으로 해석하고 그 결과에 따른 입자성장을 몬테카를로법(MCM)을 이용하여 전산모사하는 방법을 제시하기 위하여 SPS의 FEH 해석과 MCM 해석의 이론적 배경을 기술한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.97-97
• /
• 2000

In this thesis, the metastable state diamond thin films have been deposited on Si substrates from methane-hydrogen and oxygen mixture using Microwave Plasma Enhanced Chemical Vapor deposition (MWPCVD) method. Effects of each experimental parameters of MWPCVD including methane concentrations, oxygen additions, operating pressure, deposition time, etc. on the growth rate and crystallinity were investigated. SEM, XRD, and Raman spectroscopy were employed to analyze the growth rate and morphology, crystallinity and prefered growth direction, and relative amounts of diamond and non-diamond phases respectively. As a methane concentration below 4%, the deposited films having well-defined facets could be obtained. As the methane concentration increases over 4%, the shape of films gradually changed into a amorphos form. The best crystallinity of the film at 3% in the Raman spectroscopy. Addition of oxygen to the methane-hydrogen mixture gave an improved film crystallinity at 50% oxygen concentration due to its more effectiveness in the selective removal of the non-diamond phased compared to the of H atom. on the contrary, the growth rate generally decreased by oxygen to from the more stable CO and CO2 is responsible for such an effect. Upon increasing the operating pressure and time, increased of growth rate and crystallinity were increased simultaneously.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.281.1-281.1
• /
• 2013

Shape control of gold nanocrystal is still one of the most important challenges remaining to achieve geometry dependent properties. Thus far, several strategies have been developed to control the shape of nanoparticles, such as adding capping agents and diverse additives or adjusting the temperature and pH. Here, we used an already established seed-mediated method that allowed us to focus on controlling the growth stage. Cetyltrimethylammonium bromide (CTAB) and ascorbic acid (AA) were used as the ligand and the reducing agent, respectively, without using any additional additives during the growth stage. We investigated how the relative ratio of CTAB and AA concentrations could be a major determinant of nanoparticle shape over a wide concentration range of CTAB and AA. As a result, a morphology diagram was constructed experimentally that covered the growth conditions of rods, cuboctahedra, cubes, and rhombic dodecahedra. The trends in the morphology diagram emphasize the importance of the interplay between CTAB and AA. Furthermore, high-index faceted gold nanocrystal was obtained by two step seeded growth. Already synthesized cubic particles developed into hexoctahedral nanocrystal consisting of 48 identical {321} facets, which indicates that the growth of gold nanocrystal is affected by initial morphology of seed particles. The hexoctahedral gold nanoparticles can be used in catalysis and optical applications which exploiting their unique geometry. Our research can provide useful guidelines for designing various facetted geometries.

• 한국재료학회지
• /
• 제31권7호
• /
• pp.397-402
• /
• 2021

In this study, binderless-WC, WC-6 wt%Co, WC-6wt% 1 and 2.5 B₄C materials are fabricated by spark plasma sintering process (SPS process). Each fabricated WC material is almost completely dense, with a relative density up to 99.5 % after the simultaneous application of pressure of 60 MPa. The WC added Co and Co-B₄C materials resulted in crystalline growth. The WC with HCP crystal structure has respective interfacial energy (basal facet direction: 1.07 ~ 1.34 J·m^-2, prismatic direction: 1.43 ~ 3.02 J·m^-2) that depends on the grain growth direction. It is confirmed that the continuous grain growth, biased by the basal facet, which has relatively low energy, is promoted at the WC/Co interface. As abnormal grain growth takes place, the grain size increases more than twice from 0.37 to 0.8 um. It is found through analysis that the hardness property also greatly decreases from about 2661.4 to 1721.4 kg/mm², along with the grain growth.

• 한국세라믹학회지
• /
• 제33권11호
• /
• pp.1260-1266
• /
• 1996

The effects of SiO2 MnO2 and sintering atmospheres (O2, N2) on the piezoelectric properties and densification behaviors of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 were investigated. The addition of SiO2 to the system enhanced the rate of densification but supressed the rate of grain growth. On the other hand the addition of MnO2 to the system did not nearly affect the rate of densification but increased slightly the rate of grain growth The densification of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 was promoted with increasing the partial pressure of O2. The relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 sintered under O2 atmosphere were higher than under N2 atmosphere. Whereas the mechanical quality factor (Qm) of specimens sintered under O2 atmosphere were lower than under N2 atmosphere. Thus the sintering atmosphere of O2 and N2 in Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 acted as donor and acceptor respectively. As the amount of SiO2 increased the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 but the mechanical quality factor (Qm) did not nearly change, In the case of the addition of MnO2 to the system the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 sintered under O2 atmosphere decreased rapidly with increasing the amount of MnO2 but they were unchanged with increasing the amount of MnO2 under N2 sintering atmosphere. Therefore the differences of the relative dielect-ric constant ($\varepsilon$r) and piezoelectric constant (d33) due to sintering atmosphere were diminished as the amount of MnO2 increased.

• Fisheries and Aquatic Sciences
• /
• 제5권2호
• /
• pp.108-113
• /
• 2002

Apical and subapical fragments of Gracilaria verrucosa (Hudson) Papenfuss (Rhodophyta) were cultured on a temperature-light gradient table with four temperature $(15,\;20,\;25\;and\;30^{\circ}C)$ and five light intensity $(20,\;40,\;60,\;80\; and\;100{\mu}mol\;photons\;m^{-2}s^{-l})$ regimes to examine growth responses. Their growth was measured weekly. Plant weight and lateral branch formation were affected by temperature and light intensity. As compared with other reports, relative growth rate (RGR) in both fragments was more or less high with 6.27 to $11.95\%$ $day^{-1}$. It was lowest at $15^{\circ}C$ with $20\mu mol$ photons $m^{-2}s^{-l}$, whereas, the highest value was recorded at $25^{\circ}C$ with $100\mu mol$ photons $m^{-2}s^{-l}$ During the experimental period, the growth pattern in G. verrucosa was significantly different between apical and subapical fragments, even though RGR based on weight was similar. Growth in apical fragments depended on elongation by apical growth. By contrast, subapical fragments mainly increased their weights by proliferation of lateral branch. This suggests that intercalary activity (e.g. lateral branch formation) is also an important means for growth of the thallus in Korean G. verrucosa. In conclusion, the relatively high growth potential with the intercalary activity in G. verrucosa will be helpful for mariculture in Korea.

• Mycobiology
• /
• 제37권1호
• /
• pp.28-30
• /
• 2009

This study was aimed at evaluating the growth promoting effect of symbiotic algal polyol (ribitol) and plant hormones on the lichen-forming fungi (LFF), Ramalina farinacea (CH050010 and 40403) and Ramalina fastigiata. The addition of ribitol to basal (malt-yeast extract) medium enhanced the relative growth rates of all three LFF. R. farinacea (CH050010), R. farinacea (40403) and R. fastigiata (H06127) showed 35.3%, 29.0% and 29.3% higher growth rates, respectively, compared to the control. IBA (indole-3-butyric acid) and TIBA (2,3,5-tridobenzoic acid) also increased growth rates of the LFF by 34 to 64% and 7 to 28%, respectively, compared to the control. The combination of ribitol with IBA or TIBA synergistically increased the growth of all LFF. For example, ribitol and IBA treatments increased growth rates of R. farinacea (CH050010), R. farinacea (40403) and R. fastigiata (H06127) by 79.4%, 40.3% and 72.8% in, respectively, compared to those grown on the basal medium. The stimulating effect of ribitol and IBA on the LFF growth induced vertical development of the fungal mass in culture. We suggest that lichen-forming fungal growth of Ramalina lichens can be stimulated aposymbiotically by supplementing polyols and plant hormones to the basal medium in the mass production of lichen secondary metabolites under large scale culture conditions.

• Journal of Ecology and Environment
• /
• 제29권5호
• /
• pp.461-467
• /
• 2006

The growth pattern and the seasonal changes in nutrient contents of Humulus japonicus were investigated. Stem length of H. japonicus reached the maximum from 240 to 260 Julian date and the median value was found at 255 Julian date. The maximum leaf area was observed from 235 to 248 Julian date and the median value was at 240 Julian date. The maximum growth rate of the stem length ranged from 205 to 227 Julian date. The leaf area showed the maximum growth rate from 196 to 214 Julian date. The median date in the growth rate of the stem length and leaf area was 212 and 205 Julian date, respectively. The growth rate of H. japonicus was related to rainy season and precipitation. Phosphorus and sodium contents of H. japonicus were correlated with maximum potential rate of relative growth. Although stem biomass of H. japonicus was $ 1.5{\sim}3.5$ times larger than that of leaf, N content of the leaf ($4.48{\sim}5.27%$) was about 2 times higher than that of the stem ($2.00{\sim}3.62%$). High content of N might be responsible for the high growth rate of H. japonicus in summer. This result provides valuable information for appropriate timing for the removal of H. japonicus.